Best Circular Saw Blades in 2027

The Diablo D0724A is a 7.25 in framing blade with 24 teeth. Low tooth count means fast, aggressive cuts in lumber. It uses a Tracking Point Amped 3-Tooth Grind, which the listing says keeps cuts straight in framing, plywood, and pressure-treated wood.

The kerf is 0.059 in, tied for the thinnest on the page. A thin kerf removes less wood, so the saw works less. The listing says it is optimized for cordless tools and claims up to 30% more cuts per battery charge. Max speed is 8000 rpm, the lowest rating among models that list it.

It has TiCo Hi-Density Carbide, an anti-friction coating, and vibration-damping vents. The pack holds 10 blades, the most of any product here. It weighs 0.45 lb and fits a 0.625 in arbor. It ranks first on our Best Score at 78.

The Diablo D0641X is a 6.5 in blade with 40 teeth. That count sits between rough framing and fine finish work. The listing points to smooth crosscuts and rips in hardwood, softwood, and plywood, so it can cover mixed trim and shop jobs.

It has a 0.059 in kerf and a 10000 rpm rating, tied for the highest rating on the page. TiCo Hi-Density Carbide is listed for longer life. A non-stick coating is meant to resist gumming and rust. Laser-cut vents are listed to cut noise and vibration.

It weighs 0.36 lb and uses a 0.625 in arbor. The maker does not publish a tooth grind for it. It is sold as a single blade, and it only suits saws that take 6.5 in blades.

The Diablo D0624A is a 6.5 in framing blade with 24 teeth and an ATB grind. It weighs 0.34 lb, the lowest among the models that list weight. A lighter blade can ease strain on a small cordless saw.

The listing names pressure-treated wood, 2X lumber, and plywood. It is labeled cordless optimized and claims up to 30% more cuts per charge. Kerf is 0.059 in. Max speed is 8800 rpm. The arbor is 0.625 in.

TiCo Hi-Density Carbide, a Perma-Shield coating, and vibration vents are all listed. It comes as a single blade. It fits only 6.5 in saws, so check your saw first. It ranks fifth on our Best Score at 59.

The Diablo Steel Demon D0748CFA is the odd one out. It is made for medium metal, not wood. It has 48 teeth and a Triple Chip Grind, and the carbide type is Cermet II, listed for high heat tolerance and hardness.

The listing compares it to grinding discs and claims up to 25X longer life, cooler cuts, and up to 10X faster cuts. Those are maker claims. It also says the cutting action reduces sparks. A coating and vibration vents are listed too.

Diameter is 7.25 in and weight is 0.67 lb, the heaviest among models that list weight. Kerf, max rpm, and arbor size are not published, so check your saw's rating before buying. Never use a wood saw's speed assumptions for metal.

The FOXBC FOX71460T has 60 teeth, the highest count on the page. More teeth take smaller bites, which leaves a finer edge. Its ATB grind suits crosscuts, and the listing names oak, pine, melamine, veneer plywood, and delicate molding.

Kerf is 0.063 in, wider than the 0.059 in blades from Diablo. That removes slightly more material per cut. The carbide is high-density tungsten carbide, and the arbor is 0.625 in. The diameter is 7.25 in. The listing says it works on corded and cordless saws.

The maker does not publish a max rpm, and no coating or vibration vents are listed. It weighs 0.6 lb and ships as one blade. Expect slower cutting than a 24-tooth blade.