
SATA 3T AluminumSATA 3-Ton Aluminum Floor Jack
Aluminum frame, 3 ton rating, dual-piston pump and overload valve, though weight is not published.
- Rated capacity
- 3.0 ton
- Min saddle height
- 3.75 in
- Jack weight
- —
Choosing an aluminum floor jack comes down to four checks. Confirm the rated capacity fits your vehicle. Check the minimum saddle height against your ground clearance. Look at the weight, since a lighter jack is the reason to buy aluminum. Then check length and width for storage. We put 6 products on one spec sheet so you can compare these numbers directly, along with safety features like overload valves and listed standards.
Quick answer
Ranked from 6 floor jacks that met our standard, compared on weight, capacity (tons), and minimum lift height.
As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

Aluminum frame, 3 ton rating, dual-piston pump and overload valve, though weight is not published.

Shortest at 25.6 in and narrowest at 12.6 in among the models that list sizes.

At 56 lb it is the lightest 3-ton model with a listed weight.
| Spec | ||||||
|---|---|---|---|---|---|---|
| Best Scoreout of 100 | 69 | 59 | 54 | 51 | 48 | 37 |
| Rated capacityton | 3.0 ton (best in row) | 3.0 ton (best in row) | 3.0 ton (best in row) | 2.0 ton | 3.0 ton (best in row) | 1.5 ton |
| Min saddle heightin | 3.75 in | 3.75 in | 3.75 in | 3.54 in | 3.00 in (best in row) | 3.50 in |
| Max lift heightin | 19.1 in | 18.9 in | 18.0 in | 19.9 in (best in row) | 19.0 in | 14.0 in |
| Lift rangein | 3.75–19.125 | 3.75–18.9 | 3.75–18 | 3.54–19.88 (best in row) | 3–19 | 3.5–14 |
| Jack weightlb | — | 57.8 lb | 56.0 lb | 46.3 lb | 58.0 lb | 32.8 lb (best in row) |
| Frame material | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum |
| Dual-piston quick lift | Yes | Yes | Yes | Yes | — | Yes |
| Overload valve | Yes | Yes | Yes | Yes | — | — |
| Lengthin | 28.4 in | 25.6 in (best in row) | 30.0 in | 29.5 in | 32.0 in | — |
| Widthin | 13.6 in | 12.6 in (best in row) | 13.5 in | 13.0 in | 16.0 in | — |
| Rubber saddle pad | — | Yes | Yes | Yes | Yes | — |
| Safety standard | — | Meets ASME standard | ASME PASE-2019 | ASME PASE-2019 | — | — |
| Warrantyyr | — | — | 1 year | 1 year | — | — |
We reviewed 75 floor jacks and kept only the 6 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.
These reviews are based on specifications and listing information. They cover the five top-ranked jacks and point out where the data has gaps.
SATA 3-Ton leads our ranking for aluminum jacks
The SATA 3T Aluminum leads our ranking. It has an aluminum frame and a 3 ton rating, which the listing says suits sedans, SUVs and light trucks. It also has a dual-piston pump, which raises the saddle faster with fewer strokes, and an overload valve that limits the load the jack will lift. Both matter when you work alone in a garage.
Carrying and storage is where the data has a gap. SATA does not publish a weight for this jack, so we cannot say how it compares with the others. The listing calls the aluminum build 30% lighter than traditional steel models. Length is 28.35 in and width is 13.58 in, so check your shelf space first.
Reach is good but not the lowest. Its 3.75 in minimum saddle height matches two other models, while the JEGS goes lower at 3 in. Max height is 19.125 in, giving a 3.75 to 19.125 in lift range for low sedans and SUVs. The data lists no saddle pad or warranty.
VerdictA well-equipped 3-ton aluminum jack, held back only by the missing weight figure.
Yellow Jacket 3T stores small and ranks second
The Yellow Jacket ranks second on our list. Its all-aluminum frame carries a 3 ton rating, and the listing gives that as 6600lbs. It has a dual-piston pump for quicker lifting and an overload valve. The maker also says it meets an ASME standard, which is a useful check on a tool that holds a vehicle up.
Storage is the strong point. At 25.6 in long and 12.6 in wide, it is the shortest and narrowest jack here among the models that list those sizes. Weight is 57.8 lb, which is more than the ARCAN 3-ton at 56 lb. The listing mentions two swivel rear casters, two front rollers and a side handle for carrying.
The saddle starts at 3.75 in, the same as the SATA and the ARCAN A20019, and rises to 18.9 in. A rubber saddle pad is listed, which protects the contact point on the vehicle. Its 18.9 in top height is below the SATA's 19.125 in. The data shows no warranty length.
VerdictA compact, certified 3-ton aluminum jack that gives up some weight advantage.
ARCAN A20019 is the lightest listed 3-ton jack
For a buyer who wants aluminum and a 3 ton rating, the ARCAN A20019 ranks third and is the lightest 3-ton model that lists a weight. It weighs 56 lb. That is still not light, but it is below the Yellow Jacket at 57.8 lb and the JEGS at 58 lb. The SATA does not publish a weight.
Safety details are well covered. The listing names a reinforced lift arm, bypass and overload valves, and a dual-piston pump. It cites the ASME PASE-2019 standard and a 1 yr warranty. The listing gives capacity as 6,000 lb, which is the 3 ton figure written out in pounds.
Size is the trade-off. It is 30 in long and 13.5 in wide, longer than the Yellow Jacket at 25.6 in. The saddle starts at 3.75 in and rises to 18 in, so it has the lowest maximum height of the 3-ton models.
VerdictA sound pick for lighter 3-ton lifting, as long as 18 in of height is enough.
ARCAN A20017 trades capacity for weight and reach
The ARCAN A20017 ranks fourth, and it is rated for 2 ton, not 3 ton. The listing gives that as 4,000 lb and names passenger vehicles, SUVs and light trucks. Check your vehicle's weight against the rating before you buy, since five of the seven jacks on this page are rated higher.
What you get in return is less weight and more reach. At 46.3 lb it is lighter than every 3-ton model that lists a weight. Its 19.88 in maximum height is the highest on the page, and the lift range runs from 3.54 in to 19.88 in. That is also a lower start than any of the 3-ton jacks except the JEGS.
Other details are covered. The listing names dual pump pistons, an overload valve, a rubber saddle pad and the ASME PASE-2019 standard. A 1 yr warranty is listed. It is 29.53 in long and 13 in wide, so it is a little shorter than the A20019.
VerdictA lighter, longer-reaching aluminum jack that only suits you if 2 ton is enough.
JEGS 3-Ton reaches the lowest saddle height
The JEGS 3-Ton ranks fifth. Its main strength is reach under low cars. The saddle starts at 3 in, the lowest minimum height of all seven jacks, and rises to 19 in. If low-clearance access is your first concern, that is the figure to look at. It also has an aluminum frame and a 3 ton rating.
The data is thinner elsewhere. It lists no dual-piston pump, overload valve, safety standard or warranty. That does not prove the jack lacks them, only that the maker does not say. It does list a rubber lift pad and a 360 degree rotating saddle, which makes positioning easier.
Size and weight are the cost. It weighs 58 lb, tied with the NOS for the heaviest listed, and it is 32 in long and 16 in wide, the longest and widest of the models that list sizes. Plan for more storage room than the Yellow Jacket needs.
VerdictA low-reaching 3-ton aluminum jack that is big and light on listed safety details.
Best among the reviewed tools
A jack lifts part of the vehicle, but the rating should still exceed what you plan to raise. Five of the seven jacks here are rated 3 ton, one is 2 ton and one is 1.5 ton. Check your owner's manual for weight before choosing.
Low cars need a low starting height. Minimum saddle height is how far the pad sits above the floor when the jack is fully down. The jacks here start between 3 in and 3.75 in. If your car sits very low, even small differences can decide whether it fits.
Aluminum is chosen to save weight, but the numbers vary. Among the six jacks that list weight, the range runs from 32.8 lb to 58 lb. One jack here does not publish a weight. Always check the listed figure before assuming aluminum means easy to carry.
A dual-piston pump cuts the strokes needed to reach the vehicle. An overload valve limits the load, and a listed standard such as ASME gives you something to verify. Not every jack here lists these, so compare each spec row, not just the headline rating.
Strength depends on the rating, not just the metal. All seven jacks here list an aluminum frame, with ratings from 1.5 ton to 3 ton. Check the rating against your vehicle and use the jack on a firm, level surface.
The ARCAN A20006 is the lightest listed at 32.8 lb, but it is rated 1.5 ton. Among 3-ton models that list weight, the ARCAN A20019 is lightest at 56 lb. The SATA does not publish its weight.
The JEGS has the lowest minimum saddle height at 3 in. The SATA, Yellow Jacket and ARCAN A20019 start at 3.75 in. Compare these numbers with your car's lift point height, since the jack must slide under before it can lift.
It is not required, but it helps. A dual-piston pump raises the saddle to the vehicle in fewer strokes. The SATA, Yellow Jacket and all three ARCAN jacks list one. The JEGS and NOS do not list it.
Your own selection is kept in the link, so friends see the same side-by-side.