How Much Does an Aluminum Floor Jack Weigh?
Among the aluminum floor jacks that list a weight on our spec sheet, the range runs from 32.8 lb to 58 lb. The 3-ton models we compare list 56 lb to 58 lb, the one 2-ton model lists 46.3 lb, and the 1.5-ton model lists 32.8 lb. Weight rises with rated capacity, but length, width and build also play a part.
SATA 3T AluminumBest overall
YELLOW JACKET AS83003XL.Most compact footprint
ARCAN A20019Lightest listed 3-tonAluminum floor jack weights at a glance
We compare published specifications, so the numbers below are the figures listed for each jack. Six of the seven jacks on our aluminum floor jack page list a weight. One 3-ton model does not publish one, so we can't give you a number for it.
The table shows how weight lines up with capacity, size and starting height. For a wider look at the options, see our page on the best aluminum floor jack.
| Jack | Rated capacity | Listed weight | Length | Width | Min height |
|---|---|---|---|---|---|
| ARCAN A20006 | 1.5 ton | 32.8 lb | Not listed | Not listed | 3.5 in |
| ARCAN A20017 | 2 ton | 46.3 lb | 29.53 in | 13 in | 3.54 in |
| ARCAN A20019 | 3 ton | 56 lb | 30 in | 13.5 in | 3.75 in |
| YELLOW JACKET AS83003XL | 3 ton | 57.8 lb | 25.6 in | 12.6 in | 3.75 in |
| JEGS 555-80077 | 3 ton | 58 lb | 32 in | 16 in | 3 in |
| NOS NSJ0301 | 3 ton | 58 lb | 26.4 in | 13 in | 3.7 in |
| SATA 3T Aluminum | 3 ton | Not published | 28.35 in | 13.58 in | 3.75 in |
How much does a 3-ton aluminum floor jack weigh?
Four 3-ton models on our sheet list a weight, and they sit close together: 56 lb, 57.8 lb, 58 lb and 58 lb. That is a spread of only 2 lb, so for this size you can expect roughly 56 lb to 58 lb.
The lightest listed 3-ton jack is the ARCAN A20019 at 56 lb. The JEGS and NOS jacks both list 58 lb. The SATA 3-ton jack does not publish a weight, so check the seller's listing before you buy if weight matters to you.
How much does a 2-ton aluminum floor jack weigh?
The only 2-ton jack on our sheet is the ARCAN A20017, which lists 46.3 lb. That is about 10 lb lighter than the lightest 3-ton model we list.
It also has the widest lift range on the page, from 3.54 in to 19.88 in. The tradeoff is the lower rating, so make sure 2 ton covers the vehicle you plan to lift. Your owner's manual lists the vehicle weight.
What is the lightest aluminum floor jack?
On our sheet, the lightest is the ARCAN A20006 at 32.8 lb. It is a 1.5-ton jack with a 3.5 in minimum height and a maximum height of 14 in.
That low weight comes with limits. The 14 in maximum height is the lowest of the seven jacks, so it may not reach the lift points on taller vehicles. Its listing also says it has a carry handle, which helps when you move it. If you need a 3-ton rating, the 56 lb ARCAN A20019 is the lightest 3-ton model with a listed weight.
Why weights differ from jack to jack
Aluminum is the reason these jacks are lighter than many steel ones, but the frame is only part of the story. A few things change the final number:
- Rated capacity: a higher rating generally needs heavier parts to carry the load.
- Frame length and width: the longest and widest jack on our sheet, the JEGS at 32 in by 16 in, lists 58 lb.
- Pump and hydraulics: a dual-piston pump adds parts, though it also cuts the strokes needed to reach the vehicle.
- Extras: casters, rollers, a side handle or a carry handle add to the total.
Weight is not the only number to check
A lighter jack is easier to carry, but it still has to fit your car and your garage. Check the minimum saddle height first. The jacks we compare start between 3 in and 3.75 in, and a low car may need the lowest starting height.
Then check length and width for storage and for rolling under the vehicle. The shortest jack with listed sizes is the YELLOW JACKET at 25.6 in long and 12.6 in wide, and it lists 57.8 lb. If your car sits very low, our page on the best low profile floor jack can help you narrow things down. If you are still deciding between aluminum and other materials, start with the best floor jack comparison.
Safety when lifting and moving a jack
A jack of 56 lb to 58 lb is heavy enough to strain your back if you lift it wrong. Bend your knees, keep the jack close to your body and ask for help when loading it into a trunk. Use the side or carry handle if your jack has one, and roll it on a smooth floor rather than carrying it when you can.
When you use the jack, work on a flat, hard surface and set the parking brake. A jack only lifts the vehicle. Never get under a car held up by a jack alone. Place jack stands rated for the load under solid points on the vehicle before you work underneath. Wear eye protection around hydraulic equipment and stay clear of the vehicle's path if it shifts.
Frequently asked questions
Does a heavier aluminum jack mean a stronger one?
Not always. The 3-ton jacks we list sit within a few pounds of each other, so weight alone says little about strength. Compare the rated capacity, the listed standard and the safety features instead.
Is an aluminum floor jack easier to carry than a steel one?
It is usually lighter, but our listed weights show it is still not light. Most of the 3-ton aluminum jacks we compare weigh 56 lb or more, so lift with care.
Where do I find the weight of a jack I already own?
Look for a label or stamp on the frame, then check the owner's manual or the maker's product page. If no weight is published, you can weigh it on a bathroom scale by holding it and subtracting your own weight.
Do I need to know the jack's weight before I buy?
It helps if you carry the jack often or have limited storage. For a garage jack that stays on the floor, capacity, minimum height and safety features matter more.