Best Band Saws for Home Workshop in 2027

The JET JWBS-14SFX leads our Best Score at 70. It resaws stock up to 13 in tall in one pass, tied for the most on this page, which lets you slice thick boards into bookmatched panels or make your own veneer. A 1.75 HP capacitor-run motor drives a 116 in blade loop.

Its 360 sq in ground cast iron table is the largest here and tilts 0 to 45 degrees right for bevel cuts. The 14 in wheels take blades from 1/8 in wide for tight scroll cuts to 3/4 in wide for straight resawing, and the throat measures 13-1/2 in.

It weighs 272 lb, the heaviest saw on this page, so it needs a permanent spot. That mass helps it run smoothly through thick hardwood. No blades are included, so budget for a resaw blade and a curve blade. The 5-year warranty is among the best here.

Second with a Best Score of 68, the QD-KYOHO 14 in band saw matches the JET on cut height at 13 in and edges it on throat width at 13-5/8 in, the widest on this page. That gives you room to swing large curved pieces past the blade.

It has two speed settings: 1445 FPM for hardwoods and 2950 FPM for softer woods. Slower speed keeps hardwood cuts cooler and cleaner. The cast iron table measures 21-1/2 by 15-3/4 in, listed at 338.6 sq in, and tilts for bevel cuts up to 45 degrees.

The frame is welded steel plate with dynamically balanced cast aluminum wheels, and it runs on a 120V 14-amp motor. Weight and warranty are not listed in our data, which is the main reason it sits behind the JET. It offers similar capacity at what is likely a lower cost.

The DEWALT DCS374B ranks third with a Best Score of 63, but it is a different kind of tool. It is a battery-powered, handheld deep cut band saw with a 5 in cutting capacity. Instead of feeding wood into a table, you bring the saw to pipe, conduit, strut or stock that is already in place.

It has variable speed, an LED work light with a 20 second delay, and a tool-less lever that releases blade tension for quick blade changes. An integrated hang hook lets you hang it without damaging the front handle or base.

At 16.98 lb it is heavy for a handheld tool but light compared with any stationary saw. It cannot resaw boards or cut curves like a 14 in saw. Treat it as a second saw for metal and site work, especially if you already own DEWALT 20V MAX batteries.

Fourth with a Best Score of 61, the RIKON 10-3062S suits small shops. It is a 10 in benchtop band saw with 5 in of cutting height and 9-5/8 in of cutting width, enough for curved parts, small boxes and light resawing of thin stock.

A 1/2 HP motor drives blades up to 1/2 in wide, and you can choose between 1,515 and 3,280 FPM for different materials. Spring-loaded upper and lower blade guides, a quick-release tension lever and an oversized tension handwheel make setup and blade changes faster than on many small saws.

It weighs 77.5 lb and the table tilts to 45 degrees. RIKON lists a lifetime warranty, the longest on this page. Its capacity is far below the 14 in saws, so choose it if space, not resaw height, is your main limit.

The JET JWBS-14CS rounds out the top five at a Best Score of 56. It is a 14 in band saw on an enclosed cabinet stand, which houses the 1 HP motor and V-belt drive behind a latching door. Out of the box it cuts 6 in tall, and JET says it is ready for a riser to reach 12 in.

It has a 15 by 15 in offset cast iron table, listed at 225 sq in, that puts more work area in front of the blade. A cast iron frame and computer-balanced wheels help it run smoothly. Guide blocks with ball-bearing support take 93-1/2 in blades from 1/8 in to 3/4 in wide.

At 120 lb it is much lighter than the JWBS-14SFX. One blade is included and the warranty runs 5 years. It is a sound choice if you mainly cut curves now and may want more resaw height later.