Best Hacksaws in 2027

The Mossy Oak MO17009 leads our ranking, but it is a folding pruning saw. It does not match what most people mean by a hacksaw. The blade length is 7.5 in. It ships with three blades, so one handle covers wood, plastic and light metal. Metal cutting is limited to thin tube.

The metal blade is 18 TPI and made of 58CrV. The listing rates it for copper pipe up to 1 mm and aluminum pipe up to 1.5 mm. That is thin-wall work only. The other two blades are 5 TPI and 11 TPI, made of 65Mn, for branches and hardwood or plastic pipe. A higher TPI gives a finer cut.

Blade changes are tool-free. You turn a black knob, pick a direction, then tighten the knob before use. The saw weighs 0.77 lb and has a TPR rubber comfort grip handle. The blade can be set at an adjustable angle. It folds shut and fits a nylon pouch.

The KATA KT21019M ranks second on our list. It is a mini hacksaw with a 10 in blade, built for small jobs in tight spaces. The listing says it suits metal rods, PVC pipe, plastic, thin tubing and bolts. It states it is not meant for heavy demolition, large lumber or thick hardened steel.

Blades are bi-metal at 24 TPI. That tooth count is fine for rods and tubing, because several teeth stay in contact with the work. You get three blades in the box: one installed and two spares. The maker lists no cutting depth, so check the clearance before you buy for bigger stock.

At 0.3 lb, it is light, and the listing describes a compact aluminum frame. The handle is ergonomic. The maker does not list tool-free blade change or an adjustable blade angle, so blade swaps are not a selling point here. It is a tool-box saw for short cuts around the home or garage.

The Hanpex X053-AU ranks third and is a true frame hacksaw. The blade is 12 in long, and the frame gives a cutting depth of 4 in. That is the depth that decides how large a pipe or bar you can cut through. Among the models that list it, 4 in is at the low end.

The blade is bi-metal with 24 TPI. The listing calls it contractor-grade and names metal and plastic as the main jobs, with pipe, rebar and stainless steel also mentioned. A 24 TPI count gives fine teeth, which suits thin walls and tubing. A rotating knob sets blade tension, and the listing credits the steel-reinforced core with faster cutting.

The saw weighs 0.66 lb and has a non-slip handle that the listing says reduces fatigue on long cuts. The maker does not publish a tool-free blade change, an included blade count or an adjustable blade angle. Check what comes in the box before you plan on spares.

The Klein Tools 31432 ranks fourth. It is a compact medium-cut hacksaw with a 10 in blade, aimed at low-clearance spots where a full frame is awkward. The blade flexes with the cut, which helps you hold a flush cut against a surface. The blade can also extend to reach awkward places.

The big draw is the tool-free lever. It lets you change blades and adjust the blade length without tools, which saves time when you swap between jobs. The blade is bi-metal with 24 TPI, a fine tooth count that suits thin metal and tubing. The listing does not state a cutting depth or an included blade count.

It weighs 0.5 lb and has a contoured overmolded handle for a secure hold. That keeps it easy to carry into confined work. The maker does not publish an adjustable blade angle. Because this is a compact saw, long strokes through large stock are not what it is built for.

The PLOWFAR high-tension hacksaw ranks fifth. It pairs a 12 in blade with a steel frame and a cutting depth of 4 in. The listing describes the frame as solid and built for a long life. Deeper cuts through pipe and bar need that clearance, and this frame provides it.

The blade is high-speed steel, bi-metal, 24 TPI. The listing gives its size as 12 in long, 0.025 in thick and 1/2 in wide, and calls it shatter resistant. Fine teeth at 24 TPI suit pipe walls and sheet. The listing names wood, PVC and stainless steel as target materials.

Blade tension is set with a knob. The listing says you can swap in a spare blade once the knob is fully loosened, which makes blade changes tool-free. The handle is ergonomically shaped. The maker does not publish a weight, an included blade count or an adjustable blade angle, so check those before you buy.