
ROMECH ROMECH - 119ROMECH Dual Temp Full Size Hot Glue Gun
Dual temperature, low-drip nozzle, 21 sticks and a storage case, all listed.
- Power
- 100 W
- Max temperature
- 410 °F
- Included glue sticks
- 21 count
Crafters need a glue gun that is easy to control, leaves little drip or stringing, and stays comfortable over a long session. Nozzle design, heat settings, glue stick size and weight all affect that. Power matters too, since low heat suits delicate materials and high heat suits wood. We put 23 products on one spec sheet so you can compare power, temperature, weight, included sticks and safety features in one place.
Quick answer
Ranked from 23 glue guns that met our standard, compared on gun size, low-drip nozzle, glue stick diameter.
As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

Dual temperature, low-drip nozzle, 21 sticks and a storage case, all listed.

Runs cordless up to 3 minutes and weighs 0.5 lb.

150 W and 428°F, the highest on the page.
| Spec | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Best Scoreout of 100 | 76 | 67 | 65 | 64 | 63 | 60 | 60 | 57 | 55 | 55 |
| PowerW | 100 W | 60 W | 150 W (best in row) | 100 W | 100 W | — | 100 W | — | — | — |
| Max temperature°F | 410 °F | 380 °F | 428 °F (best in row) | 392 °F | 410 °F | 428 °F (best in row) | — | — | — | — |
| Dual temperature settings | Yes | — | — | — | Yes | Yes | — | Yes | Yes | — |
| Cordless operation | — | Yes (best in row) | — | Yes (best in row) | — | No | — | — | — | Yes (best in row) |
| Gun size | full_size (best in row) | full_size (best in row) | full_size (best in row) | full_size (best in row) | full_size (best in row) | full_size (best in row) | full_size (best in row) | full_size (best in row) | mini | mini |
| Glue stick diameterin | 0.44 in (best in row) | — | 0.43 in | 0.43 in | 0.43 in | 0.43 in | 0.43 in | 0.43 in | 0.27 in | 0.28 in |
| Included glue stickscount | 21 count | — | 5 count | 10 count | 10 count | 20 count | 12 count | 45 count | 75 count (best in row) | 10 count |
| Weightlb | — | 0.50 lb | 1.21 lb | 1.35 lb | — | 0.68 lb | — | 2.01 lb | 1.12 lb | 0.37 lb (best in row) |
| Safety fuse | Yes | Yes | — | — | Yes | — | Yes | Yes | Yes | — |
| Low-drip nozzle | Yes | — | Yes | Yes | Yes | Yes | Yes | — | — | Yes |
| Warrantyyr | — | — | — | — | 2 years | — | 2 years | — | — | — |
| Included storage case | Yes | — | — | — | — | — | — | — | — | — |
We reviewed 42 glue guns and kept only the 23 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.
These reviews are based on specifications and listing information, not hands-on use. We focus on what each spec means for craft work.
Dual temperature and low drip make it our top pick
The ROMECH 119 ranks first with a Best Score of 75. It has two heat modes. The listing gives 60 W at 300°F for delicate craft materials and 100 W at 410°F for wood and denser items. That range lets one gun cover felt, foam and wood.
Drip control matters most for detail work. This model has a low-drip copper nozzle, and the listing says it limits stringing and keeps the bead steady. It uses 0.4375 in sticks, the largest diameter on the page, and ships with 21 of them, so you can start right away.
It also has a safety fuse and an included storage case. The case holds the gun and accessories, which helps if you move between a desk and a craft room. The maker does not publish a weight for this model, so check the grip size if you work for hours. It is a full-size gun, which can feel bulkier on tiny pieces.
VerdictIt is the most complete spec sheet here for crafters who want heat control and clean glue flow.
A cordless full-size gun that stays light at 0.5 lb
The Surebonder CL-800F ranks second with a Best Score of 65. Its main draw is cordless use. The listing says it runs indefinitely with the cord and up to 3 minutes without it, using a heating base to keep it warm.
At 0.5 lb, it is the lightest full-size gun among the models that list weight. That helps in long sessions, since less weight means less strain on the wrist. It reaches 380°F from 60 W, and the listing says that suits metal, wood and ceramics as well as porous materials.
It has a safety fuse, an insulated nozzle and side fins that stop glue from backing up when you lay it down. A mini glue pad holds the gun between applications. The maker does not list a low-drip nozzle, a dual temperature setting, stick diameter or a stick count, so check those before buying. Three minutes cordless is short for big projects.
VerdictIt suits crafters who value light weight and short cordless freedom over extra features.
The most powerful gun here, with six nozzles
The BOSWELL 150W Luxury Set ranks third with a Best Score of 64. It has the highest power on the page at 150 W and the highest max temperature at 428°F. The listing says it heats up in 1 to 3 minutes.
A temperature dial adjusts heat from 284 to 428°F. That is a wide range for mixed craft materials, though it is a dial, not a two-step switch. The kit includes 6 interchangeable copper nozzles and a mini wrench. Nozzle choice helps with bead size on small or detailed work, and the listing describes them as anti-dripping.
Weight is listed at 1.21 lb, which is heavier than the 0.5 lb Surebonder. Only 5 glue sticks come in the box, the lowest count on the page, so plan to buy more. The sticks are 0.43 in. It has no listed safety fuse or warranty, so check those details. The stand detaches to keep the gun upright.
VerdictIt is a strong choice for crafters who like to tune heat and nozzle size.
Two power modes and a 2-year warranty
The Assark NL-203 ranks fourth with a Best Score of 60. Like the top pick, it has a switch between 60 W at 300°F and 100 W at 410°F. The listing says the lower mode suits crafts and delicate materials, and the higher mode suits wood and heavy-duty work.
It has a low-drip nozzle and a safety fuse. The listing also says fast preheating reduces dripping and leakage. Sticks are 0.43 in, and 10 come in the box. That is fewer than the ROMECH 119 offers, but enough to start.
The listing describes a 30° curved handle meant to reduce slippage and fatigue. That could help during long sessions, but the maker does not publish a weight, so you cannot compare how it feels in the hand against lighter guns. The warranty is 2 years, the longest listed on the page, tied with the MAXDONE. It does not list a storage case.
VerdictIt matches the top pick on heat control and drip features, with less in the box.
A 100 W full-size gun with an extended trigger
The MAXDONE GGC00144 ranks fifth with a Best Score of 58. It is a 100 W full-size gun that takes 0.43 in sticks, and 12 come with it. The listing says it preheats in about 3 minutes.
The drip-proof nozzle is meant to release glue without dripping or clumping, and the listing says it helps you place small amounts. That fits detail work. The extended trigger is described as 70% longer than a regular one, which the maker says reduces fatigue and helps control the amount of glue.
It has a built-in safety fuse and a heat-resistant rubber insulated cap. The warranty is 2 years, the longest listed on the page. There is no dual temperature setting and no max temperature published, so you cannot lower the heat for delicate materials the way you can with the top two guns. Weight is also not published, so grip comfort is a question mark.
VerdictIt is a capable single-heat gun for crafters who care most about glue placement.
Best among the reviewed tools
A low setting protects foam, fabric and floral materials, while a high setting bonds wood and metal. Guns with a switch or dial let you cover both jobs. The ROMECH 119 and Assark NL-203 list 60 W and 100 W modes.
Stringing and drips ruin detailed work. A low-drip nozzle helps keep the bead steady and small. Copper nozzles are listed on several models here, and swappable nozzles on the BOSWELL let you change bead size.
Mini guns use about 0.27 to 0.28 in sticks. Full-size guns use about 0.43 to 0.4375 in. They are not interchangeable, so check the diameter before buying refills. Larger sticks mean fewer refills on long projects.
Weight adds up over hours. Among the models that list it, weights run from 0.3 lb to 2.01 lb. Mini guns suit tiny pieces, while full-size guns move more glue. Cordless models cut cord drag but run for limited time.
Mini guns are lighter and suit small detail work. Full-size guns hold larger sticks and move more glue, which helps on bigger pieces. Pick by project size, and check that the stick diameter matches before buying refills.
It is helpful. Low heat suits delicate materials like fabric, foam and floral items, and high heat suits wood and denser materials. A single-heat gun works, but you lose that control on heat-sensitive items.
Choose a gun with a low-drip nozzle, let it heat fully, and lift the gun away with a quick twist. Lower heat can also help with delicate materials. Fast-heating guns list reduced dripping as a benefit.
For short jobs, yes. The Surebonder lists up to 3 minutes cordless, and the HOTO is battery powered. For long sessions, a corded gun keeps heat steady without recharging or returning to a base.
Your own selection is kept in the link, so friends see the same side-by-side.