
DPTOOL L9110DPTOOL CV Axle Puller Slide Hammer Kit
18 pieces, a 10.5 lb slide hammer, an outer CV adapter and wide universal fit.
- Tool type
- Multi-tool set
- Pieces included
- 18 pc
- Vehicle fit
- Wide universal
Old cars bring rust, seized joints and parts that were never meant to come apart. A good drivetrain tool set should pull inner CV joints, reach tight spots and fit many models without special adapters. Check the slide hammer weight, fork opening, extra adapters and listed vehicle fit. Some kits are only poppers or single-model adapters. We put 10 products on one spec sheet so you can compare piece count, fork size and fit before you choose.
Quick answer
Ranked from 10 drive shaft removal tools that met our standard, compared on vehicle fit range, steel material strength, and piece count with included slide hammer.
As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

18 pieces, a 10.5 lb slide hammer, an outer CV adapter and wide universal fit.

Lists an extension rod, an outer CV adapter and a 63mm fork.

Combines axle poppers with a 10.5 lb slide hammer and a storage case.
| Spec | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Best Scoreout of 100 | 75 | 74 | 57 | 54 | 50 | 49 | 42 | 42 | 33 | 28 |
| Tool type | Multi-tool set (best in row) | Multi-tool set (best in row) | Multi-tool set (best in row) | Popper or pry tool | Slide hammer kit | Slide hammer kit | Popper or pry tool | Slide hammer kit | Fork or adapter only | Fork or adapter only |
| Pieces includedpc | 18 pc (best in row) | 11 pc | 8 pc | 2 pc | 6 pc | 6 pc | 2 pc | 6 pc | 1 pc | 1 pc |
| Slide hammer included | Yes (best in row) | Yes (best in row) | Yes (best in row) | No | Yes (best in row) | Yes (best in row) | No | Yes (best in row) | No | No |
| Slide hammer weightlb | 10.5 lb (best in row) | — | 10.5 lb (best in row) | — | 10.5 lb (best in row) | 10.0 lb | — | 10.5 lb (best in row) | — | — |
| Largest fork openingmm | 63 mm | 63 mm | 63 mm | — | 63 mm | 63 mm | 76 mm (best in row) | 63 mm | 63 mm | — |
| Fork depthin | — | — | — | — | — | — | — | — | 3.3 in | — |
| Slide hammer thread | M18 coarse threads | — | — | — | — | — | — | — | 5/8"-18 | — |
| Material | Other | — | Forged steel (best in row) | Forged steel (best in row) | Heat-treated alloy steel | — | Steel, anodized | Other | Carbon steel | — |
| Vehicle fit | Wide universal (best in row) | Wide universal (best in row) | Most FWD vehicles | Most FWD vehicles | Most FWD vehicles | — | Most FWD vehicles | Wide universal (best in row) | Specific models only | Specific models only |
| Extension rod included | — | Yes (best in row) | — | No | — | — | No | — | No | No |
| Outer CV adapter included | Yes (best in row) | Yes (best in row) | — | No | No | No | No | No | No | No |
| Storage case included | Yes | — | Yes | — | Yes | Yes | — | Yes | — | — |
| Total weightlb | — | — | — | — | — | — | — | — | — | 2.2 lb |
We reviewed 17 drive shaft removal tools and kept only the 10 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.
These reviews are based on specifications and listing information only. Each one looks at how well the kit suits old-car drivetrain work.
Widest kit for rusted axles and drive shafts
This 18-piece set leads our ranking, and the reason is range. It is the largest kit on the page by piece count. The kit pairs a 10.5 lb slide hammer with 48mm and 63mm CV joint forks. The slide hammer uses M18 coarse threads and is designed for use with an extension rod.
Older cars often have seized joints, and a heavy hammer helps there. The listing says the hammer is 10.5 lb and 26 in long. The set also adds a steel cable adapter, an external CV joint adapter, a 24 in breaker bar and a pry bar wrench adaptor head. That mix covers more jobs than a plain puller.
Be clear about limits. The data lists no socket for axle nuts, so rusted axle nuts still need your own tools. Material is listed only as Other. A plastic storage box keeps the pieces together, and the listing calls the fit wide universal.
VerdictIt is the most complete answer to this keyword, though you must bring your own axle nut socket.
Extension rod and outer adapter in a compact kit
Ranked second, this 11-piece kit takes a different route from the leader. It lists an extension rod, which matters in cramped wheel wells on older cars. It also lists an outer CV adapter and a 63mm fork. The listing adds a 48mm fork, a steel cable adapter and a control slide bar.
The maker does not publish the slide hammer weight, so you cannot compare its pulling mass with the 10.5 lb hammers elsewhere. The listing only calls it heavy-duty. It says the kit is made of heavy-duty steel, with the black parts forged. Fork openings top out at 63mm.
For old cars, the extension rod is the useful extra. It gives more room when the joint sits deep or the work area is tight. There is no storage case listed, and no socket for axle nuts. Treat it as a pulling kit for inner CV joints, not a full drivetrain set.
VerdictA capable inner CV puller with a useful extension rod and fewer extras than the leader.
Popper and slide hammer in one case
This 8-piece kit ranks third. The listing says it combines axle poppers with a 10.5 lb slide hammer, so you can pry or pull. Forged steel is the listed material. The 63mm and 48mm forks lock onto the inner CV axle, and the poppers use a 1/4 in thin wedge entry for tight gaps.
The fit is listed as most FWD vehicles, which is narrower than the wide universal fit on the top two kits. That matters if your old car is not front-wheel drive. The listing describes front-wheel-drive use only, and that is the job it is built for. Check your drive layout before you buy.
The listing also describes a rubber-coated fork handle for grip with greasy hands. A heavy-duty portable case holds the set. It does not list an extension rod or an outer CV adapter, or an axle nut socket. For seized joints, the 10.5 lb hammer is the main pulling tool here.
VerdictA sensible mid-range kit for front-wheel-drive repairs, but narrower in fit than the top two.
A two-piece popper, not a drivetrain set
This 2-piece kit ranks fourth, but it does not match the keyword well. It is a popper or pry tool, not a slide hammer set. The listing describes a wedge-shaped CV axle fork and a dummy gasket front fork, both made of forged steel.
You insert the wedge between the transaxle housing and the shaft joint, then tap the fork to loosen the half shaft. The wedge starts at a depth of 1/4 in for tight spaces. The listing says the fork applies even pressure on both sides of the half shaft.
For old cars with rusted or seized parts, this is a limited answer. It has no slide hammer, no extension rod and no outer CV adapter. The maker does not publish a fork opening size. It suits front-wheel-drive half shafts that are only stuck in the transaxle, and it is a small add-on to a full kit.
VerdictUseful as a small add-on, but it is not the versatile set this keyword asks for.
Focused slide hammer kit with a case
This 6-piece kit ranks fifth. It centers on a 10.5 lb slide hammer with a 19.5 in shaft, and the listing says that is twice the impact of standard 5 lb hammers. That helps with stuck inner joints on older front-wheel-drive cars. Six pieces keep the kit simple to store and carry.
Two forks, 48mm and 63mm, plus a steel cable adapter cover round and odd-shaped inner joint housings. Use the cable adapter when a U-shaped fork cannot grasp the housing. The material is heat-treated alloy steel, and the listing mentions a black oxide finish to resist rust. A blow-molded case and a 1 year warranty are listed.
It lists no outer CV adapter and no extension rod, and its fit is listed as most FWD vehicles. The listing names Ford, VW, Toyota and Polaris models. For drive shafts and axle nuts on other layouts, you will need more tools. It ties with three kits at the top hammer weight.
VerdictA capable hammer kit for front-wheel-drive inner joints, with less range than the top two.
Best among the reviewed tools
Older cars vary in joint size and layout. Look for a multi-tool set with two forks, a cable adapter and an outer CV adapter. Single forks and poppers solve one job. The listed vehicle fit tells you how wide the kit reaches.
A heavier hammer delivers more pull on a seized inner joint. Among the models that list it, the range is 10 lb to 10.5 lb. Four kits list 10.5 lb. Also check the shaft length and thread, since forks must match the hammer.
The fork opening must wrap the inner joint housing. Most kits here list 63 mm as the largest opening, and several add a 48mm fork. One popper lists 76.2 mm. Measure your joint before you buy, because an opening that is too small will not seat.
None of these kits lists a socket for rusted axle nuts. The 18-piece set adds a 24 in breaker bar and a pry bar wrench adaptor head, which helps with leverage. Plan to buy a proper axle nut socket separately.
Among the products on this page, the DPTOOL L9110 leads our ranking. It has 18 pieces, a 10.5 lb slide hammer, two forks and an outer CV adapter. It is the largest kit by piece count, but it does not list an axle nut socket.
A slide hammer pulls an inner CV joint straight out and suits seized parts. A popper pries the half shaft free from the transaxle and works in tight gaps. The Bonbo and DearChan poppers list no slide hammer. Some kits, such as the SCBoutique kit, include both.
No. Three kits list wide universal fit, and several list most FWD vehicles. Two single-piece tools list specific models only. Check each listing's vehicle notes before you buy, and confirm your car's joint type matches what the tool supports.
It is the width of the U-shaped fork's opening that wraps the inner CV joint housing. A 63mm fork suits wider housings and a 48mm fork suits narrower ones. Seven of the eight models that list an opening top out at 63 mm, so check your joint size.
Your own selection is kept in the link, so friends see the same side-by-side.