Guide

Which Type of Thickness Planer Should You Choose?

For most home and small shops, a benchtop planer is the right type. Choose straight knives if you mostly plane straight-grained lumber and want lower running costs, or a spiral head if you plane figured wood and want quieter, smoother cuts. A stationary planer only makes sense if you plane large volumes or boards wider than a benchtop machine can take.

Updated 2026-11-12 · Based on published specifications and maker information

Top picks from our best thickness planer for the money comparison

The three main types at a glance

Thickness planers differ in two ways: how big the machine is, and what kind of cutterhead it uses. That gives you three practical choices for most buyers.

A benchtop planer with straight knives is the classic starter machine. A benchtop planer with a spiral (helical) head swaps the long knives for many small carbide inserts. A stationary planer is a heavy floor-standing machine built for production work.

TypeBest forTrade-offs
Benchtop, straight knivesStraight-grained boards, general projects, lower running costsLouder, and can tear out figured grain
Benchtop, spiral headFigured or interlocked grain, quieter shop, smooth finishInserts cost more to replace as a set, though you can rotate them
Stationary (floor-standing)High volume, wide boards, daily useLarge footprint, heavy, usually needs dedicated power and space

Benchtop with straight knives

Straight-knife planers use two or three long blades across the cutterhead. They are simple, familiar and widely supported with replacement knives. If your wood is mostly straight-grained, they leave a good surface.

From the specs we compare, the CRAFTSMAN CMEW320 has two reversible knives and a 12.25 in width capacity. The DEWALT DW735 steps up to three knives and a 13 in capacity, and its listing describes two feed speeds, 96 or 179 cuts per inch. The DEWALT DW734 also uses three knives and adds a four-column carriage lock aimed at reducing snipe. You can see how these knife-based models stack up in our best thickness planer comparison.

The main downside is what happens when a knife hits a nick or knot. You will see lines in the board until you rotate or replace the knife. Reversible, disposable knives make that quick, but it is still a chore.

Benchtop with a spiral head

A spiral cutterhead arranges small carbide inserts in staggered rows. Each insert makes a short shearing cut, which is why these heads are known for running quieter and leaving a smoother surface in figured wood such as curly maple.

The Cutech 40800H lists 26 inserts on a 13 in machine at 69.2 lb, with a two-speed feed and an 8-position depth stop for batching boards to one thickness. The VEVOR 13 in spiral model lists a 2000W motor and weighs 61.73 lb. Both list anti-snipe features.

If one insert chips, you rotate or replace that single insert rather than a whole knife. That is a real advantage on reclaimed lumber, where hidden grit and nails can damage a cutter. Spiral heads usually cost more up front, so weigh that against how often you plane tricky grain. If cost is your main filter, our best thickness planer for the money page shows which spiral models offer the most for the spend.

When a stationary planer makes sense

Stationary planers are larger and heavier than the benchtop machines on our list, which weigh 60 lb and up. They are built for long runs and heavier daily use.

They make sense if you plane lumber for sale, build furniture in volume, or regularly need boards wider than 13 in. They also need real floor space, a solid power supply and strong dust collection.

For a garage or basement hobby shop, that is usually more machine than you need. A good benchtop planer on a stable stand covers most work.

How to decide in five steps

Work through these questions in order. Most buyers end up with a clear answer by step three.

  • Measure your widest board. Most benchtop planers we compare cover 12.25 to 13 in, so anything wider needs a different plan.
  • Check your thickest stock. Several machines list about 6 in of thickness capacity, and the WOODERS PL13-15AB lists 6.3 in.
  • Look at your grain. Mostly straight boards suit straight knives. Figured or swirly grain favors a spiral head.
  • Think about noise and cleanup. Spiral heads run quieter, but every planer throws lots of chips and needs a dust port connected to a shop vac or dust collector.
  • Consider weight and storage. If you will move the planer often, the WOODERS at 60 lb or the VEVOR spiral at 61.73 lb are lighter than the DEWALT DW735 at 91.25 lb.

Features that matter in any type

Whatever type you pick, snipe control is worth a close look. Snipe is a slightly deeper cut at the ends of a board. Carriage locks and anti-snipe designs help, and so does supporting long boards on both sides of the machine with infeed and outfeed support.

Easy knife or insert changes, a clear depth scale and a dust port also affect how much you enjoy using the machine day to day. Warranty length is another point to compare, since the CRAFTSMAN lists 3 years.

When you are ready to compare specs side by side, our best thickness planer page lines up the machines by overall ranking, and our best thickness planer for the money page covers the mix of capacity, cutterhead and features each model offers.

Safety notes before you plane

Planers are loud and throw chips at speed, so wear hearing protection and safety glasses every time. A dust mask or respirator is smart too, since fine dust stays in the air.

Unplug the machine before changing knives, rotating inserts or clearing a jam. Never reach into the infeed or outfeed opening while the cutterhead is spinning.

Check reclaimed wood for nails, screws and embedded grit before it goes through. Do not plane very short pieces, since they can kick back or jam. Use a dedicated circuit if the planer's listing calls for a 15 amp motor, and avoid long thin extension cords.

Frequently asked questions

Is a spiral head worth it for a beginner?

It can be. A spiral head tends to be quieter and more forgiving on tricky grain, which helps if you plane mixed or reclaimed lumber. If you mostly use straight-grained boards, straight knives work well.

Do I need a jointer as well as a planer?

A planer makes the second face parallel to the first, but it does not flatten a warped board on its own. A jointer, or a sled that holds the board flat, is the usual way to make the first face flat.

Can a benchtop planer handle hardwood?

Yes, with shallow passes. Take light cuts and slow the feed if your planer offers two speeds. Heavy cuts in dense wood strain the motor and increase tearout.

What is snipe and can I avoid it completely?

Snipe is a small dip at the start or end of a board. Anti-snipe designs and carriage locks reduce it, and good infeed and outfeed support helps. You can also start with a slightly longer board and trim the ends off.

Should I buy a planer with a stand?

A stand raises the machine to a comfortable height and gives long boards more support. It also takes more room, so check your workspace first.

Compare the products