What Size Toilet Do You Need? Rough-In Size Explained
Most US homes need a toilet with a 12 inch rough-in, which is the distance from the finished wall to the center of the floor drain. Measure yours before you shop, because a 10 inch or 14 inch rough-in needs a matching toilet. After rough-in, check the toilet's depth, bowl shape and seat height against your space and the people using it.
What toilet rough-in size means
Rough-in is the distance from the finished wall behind the toilet to the center of the drain opening in the floor. In most bathrooms the drain is covered by a round flange, and the center of that flange is the point you measure to.
The toilet's outlet sits at the back of the base, so the toilet has to be built for your distance. A toilet made for a 12 inch rough-in will not sit flush against the wall over a 10 inch drain, and it will leave an awkward gap over a 14 inch one. That is why rough-in is the first number to check, before style, flush type or color.
How to measure your rough-in
You need a tape measure and about two minutes. Measure to the wall surface, not to the baseboard, since trim adds thickness and throws off the number.
Take the measurement in these steps:
- Find the two bolts that hold the toilet to the floor, or the center of the flange if the toilet is already removed.
- Measure from the finished wall straight to the center of those bolts or the flange. Do not measure to the edge of the base.
- If the baseboard is in the way, measure to the baseboard and subtract its thickness. You can also measure to the wall above the trim.
- If the wall is tiled or has wainscoting, measure from the finished surface you will actually see.
- Round to the nearest standard size: 10, 12 or 14 inches.
Standard rough-in sizes
The common US size is 12 inches. You may find 10 inch and 14 inch layouts, most often in older homes or small bathrooms. Some makers sell the same model in more than one rough-in. For example, HOROW lists both 10 inch and 12 inch versions of its T0338W, so you can pick the one that matches your drain.
On our best toilet page, every product lists a 12 inch rough-in, so any of them suits a standard layout. If you measured something different, confirm the rough-in on the listing before you order.
| Rough-in | Where you tend to see it | What to do |
|---|---|---|
| 10 in | Older homes, some small bathrooms | Buy a model made for 10 in, or one sold in a 10 in version |
| 12 in | Most US homes | Widest choice of models |
| 14 in | Some older homes | Look for a 14 in model, as fewer are sold |
Depth, width and height: the other sizes to check
Once rough-in matches, look at how far the toilet sticks out into the room. Depth is measured from the wall to the front of the bowl. Elongated bowls are longer than round ones, so they take more floor space, though many people find them more comfortable.
Seat height is the other fit factor. Chair height, also called ADA height, sits higher than a traditional toilet and can make sitting and standing easier for seniors and people with limited mobility. A taller toilet is not automatically better, so match it to the people who will use it.
These are the published numbers for models on our comparison page that list them:
| Model | Depth | Seat height | Weight |
|---|---|---|---|
| HOROW T0338W (one-piece) | 26.6 in | 17.3 in | 99.2 lb |
| Casta Diva CD-W001 (one-piece) | 26.9 in | 17.2 in | 96 lb |
| Casta Diva CD-T005 (one-piece) | 27.17 in | 17 in | 110 lb |
| TOTO Drake CST776CSFG#01 (two-piece) | 28.375 in | Not listed | 94 lb |
| Simple Project HT-140 (two-piece) | 29.3 in | 21 in | 94 lb |
Check the room around the toilet
A toilet that fits the drain can still be a poor fit for the room. Measure how far the front of the bowl will reach, then check that the door can swing open without hitting it. Leave enough space in front of your knees to sit comfortably.
Building codes usually set minimum clearances, commonly around 15 inches from the center of the toilet to a side wall or tub, and about 21 inches of open space in front. Rules vary by location, so check with your local building department if you are remodeling.
In a tight powder room, shallower depth and a round bowl help. Our best toilet page lists the shortest depth at 26.6 in, and a lightest model at 78 lb with a round bowl for small spaces. Compare those numbers against your tape measure rather than guessing.
One-piece or two-piece, and why it affects size
One-piece toilets join the tank and bowl, which leaves fewer seams to clean. Two-piece toilets keep them separate, so you carry two lighter parts instead of one heavy unit. On our page the one-piece models range from 78 lb to 110 lb, and the two-piece models from 94 lb to 96 lb.
Weight matters in a small or upstairs bathroom, where you may carry the toilet a long way. Tank height can matter too if you plan a shelf or window above the toilet, so check the listed height before you order.
Safety notes for removing and setting a toilet
Toilets are heavy and made of ceramic that chips and cracks. Ask a helper to lift, bend your knees, and never lift by the tank or the bowl rim.
Shut off the water supply at the wall valve and flush to drain the tank before you disconnect anything. Wear gloves, since old bolts and wax seals are messy. If you cut a stuck bolt with a hacksaw, wear eye protection. Keep a rag in the open drain while the toilet is off, because sewer gas can rise through it. If you find a damaged flange or a wet, soft floor, stop and call a plumber.
Frequently asked questions
Can I use a 12 inch toilet on a 10 inch rough-in?
Not well. The toilet would sit about 2 inches too far from the wall, or the outlet would not line up with the drain. Buy a toilet made for your measured rough-in.
Do I measure to the baseboard or the wall?
Measure from the finished wall surface. If you can only reach the baseboard, subtract the baseboard's thickness from your measurement.
Is an elongated bowl always better than a round one?
Elongated bowls are longer and many people find them more comfortable, but they need more floor space. Round bowls suit tight rooms where every inch counts.
Does rough-in change with a smart or bidet toilet?
The same measurement applies. Check the listed rough-in, and also check for any need for a nearby power outlet and water supply.
CASTA DIVA CD-W001Best overall
Simple Project HT-140Tallest seat listed
HOROW T0338WShortest depth listed