Guide

What Size Spark Plug Socket Do You Need?

Most spark plugs take a 5/8 in (16mm) socket, and many newer engines use a 14mm socket instead. Your owner's manual or the number printed on your plug will confirm which one you have. Match that size, then pick a socket with a rubber insert or magnetic core so the ceramic stays protected.

Updated 2026-11-12 · Based on published specifications and maker information

Top picks from our best spark plug socket comparison

The common spark plug socket sizes

Spark plug sockets are sized to the hex on the plug's metal shell, not to the thread size. That is why two plugs that look alike can need different sockets. The three sizes you will see most often are 5/8 in (16mm), 14mm and, on some small engines, 13/16 in.

The 5/8 in and 16mm sizes are close to the same thing, since 5/8 in works out to about 15.9mm. Sellers often label one socket with both. Some listings also describe 14mm as 9/16 in, which is a close match to the same hex.

The table below sums up the sizes and where you tend to find them.

Socket sizeWhere it is commonWhat to know
5/8 in (16mm)Many cars, trucks and older enginesThe most widely used size, so a good first guess to verify
14mmMany newer cars, including some European and Asian modelsOften paired with thin wall sockets for narrow plug tubes
13/16 inSome lawn mowers and small enginesNot the same as 5/8 in, so check before you buy
Other sizesSpecialty and older enginesRare, so confirm in the manual or on the plug

How to confirm your plug size

A guess is not good enough here. A socket that is too loose can round the hex, and one that is too tight will not seat. Our best spark plug socket page makes the same point: check the plug first and confirm the size in your owner's manual before you order.

Here is a simple way to check:

  • Look up the spark plug size in your owner's manual or service manual.
  • Read the part number on a plug you already own and search the maker's catalog for its hex size.
  • If you have a spare plug, hold a wrench or socket against the hex to see which one fits snugly.
  • Buy a pack that includes more than one size if you are unsure or work on several engines.

Cars: what about a 2017 Toyota Corolla?

We do not have fitment data for specific model years, so we cannot give you one number for a 2017 Toyota Corolla. Engines differ by trim and market, and plug hardware can change between versions. Treat any size you read online as a starting point and verify it.

The safe approach is to check the manual for your exact engine, or look at the part number of the plug your car uses today. Both 14mm and 16mm sockets are common on modern cars, which is why a two-size pack is a handy choice if you want to be covered.

If your engine uses recessed plug tubes, a thin wall socket is usually the better fit. Our comparison data lists thin wall designs in both 14mm and 5/8 in sizes.

Lawn mowers and small engines

Many small engines use a 5/8 in socket, but some use 13/16 in. Mowers vary a lot by brand and age, so look up your engine model, which is usually stamped on the engine shroud, rather than the mower brand.

Small engines are usually easy to reach, so a short, straight socket often works well. A swivel is less important here than on a crowded car engine. Our data shows a 2.56 in straight socket as the shortest listed, with no swivel, which suits open access.

Pull the plug wire boot straight off first, and keep the mower level so fuel and oil stay where they belong.

Drive size, length and style

Once you know the socket size, three other choices matter. The first is drive size. Every product in our ranked lineup lists a 3/8 in drive, which fits most common ratchets and extension bars.

The second is length. Among the models that list it, total length runs from 2.56 in to 12 in. Deep plug wells need more reach, while shallow ones do fine with a shorter tool. The longest listed model is 12 in and the next longest is 10 in.

The third is style. A swivel joint helps with angled plugs, but keep your ratchet in line with the plug as you pull so the joint does not bind. Thin wall sockets suit narrow tubes. A 12-point design slips onto the hex faster, while a 6-point design uses the classic hex pattern.

Holding the plug matters too. A rubber insert or magnetic core keeps the plug steady and stops it from dropping into the engine bay. For a side-by-side look at reach, grip and build, see our spark plug socket comparison.

Safety notes

Spark plug jobs are simple, but a few habits prevent costly mistakes.

Work on a cool engine. Aluminum heads can be damaged if you remove a plug while hot. For a mower, let the engine cool and disconnect the plug wire so it cannot start. Wear eye protection, because dirt and debris can fall or spray when you pull a plug.

Blow or wipe dirt away from the plug well before removal so nothing drops into the cylinder. Pull the plug straight out, and never force a socket that does not seat fully. Forcing it can crack the ceramic or damage the plug seat. Work away from open fuel and keep gasoline sealed and out of reach.

A quick buying checklist

Put it all together before you order:

  • Confirm the plug size from the manual or the plug itself.
  • Check that the socket drive matches your ratchet, most often 3/8 in.
  • Pick a length that reaches your plug well.
  • Choose swivel, thin wall and magnetic features based on how tight the space is.
  • Consider a two-size pack if you work on more than one engine.

Frequently asked questions

Is 5/8 in the same as 16mm?

They are very close, since 5/8 in is about 15.9mm. Many sockets are marked with both sizes, and they fit the same plug hex.

Can I use a regular deep socket instead?

It can work if the size fits, but a spark plug socket is built to protect the ceramic. A rubber insert or magnetic core also holds the plug, which a regular socket does not do.

Do I need a swivel spark plug socket?

Only if the plug sits at an angle or in a tight spot. For open, straight access, a plain socket on an extension is often enough.

What if my socket feels loose or tight on the plug?

Stop and recheck the size. A wrong fit can round the hex or damage the plug seat, so confirm the size before you apply force.

Compare the products