Guide

What Size Snow Pusher Do You Need for Your Tractor?

For most subcompact tractors under 40 HP, a snow pusher in the 60 inch to 72 inch range is the usual fit. Pick the width by your tractor's weight, horsepower and loader lift rating, not by how much snow you want to move per pass. When you are between sizes, go with the narrower one and check the maker's rating.

Updated 2026-11-12 · Based on published specifications and maker information

Top picks from our best snow shovel comparison

Start with tractor class and width

Pusher size comes down to two things: how heavy your tractor is and how wide it is. A pusher that is too wide for the machine pushes the tractor around instead of the snow. One that is too narrow means extra passes and more fuel and time.

Published guidance for subcompact tractors under 40 HP points to 60 inch or 72 inch attachments. Owners of a 2320 series tractor have said a 54 inch pusher is too small, that 60 inch works well, and that 72 inch is about as wide as you want to go. Treat those as owner opinions, not rules. Your attachment maker's rating always wins.

The table below gives a starting point. It is general guidance, so confirm against your manual.

MachineTypical starting pointWhat to check
Subcompact tractor, under 40 HP60 in to 72 in pusherLoader lift rating and tractor weight
Compact tractor (a size up)Often 72 in or widerMaker's width and weight limits
Skid steerMatch the machine's rated sizeOperating capacity and quick-attach type
Pickup truck (such as an F250)A plow, not a pusherMount kit, front axle rating, plow weight
ATVA plow blade that fits the ATVMount kit and winch or lift system

Weight and loader rating matter more than width

A pusher hangs out in front of your loader, so its weight acts like a lever on the arms. Heavy, wet snow adds to that load. A wide pusher can look fine on paper and still strain a small loader.

Look up your loader's lift capacity at the full reach of the bucket pins, then compare it with the pusher's own weight plus the snow it can carry. If the maker lists a maximum tractor size or minimum horsepower for the pusher, use that number first and width second.

Pusher or plow: which one fits your tractor

A pusher is a wide box with fixed side walls. It carries snow straight ahead, which puts less side force on the loader arms. It suits big, open areas like parking pads, barn aprons and long driveways where you can push snow to the end and leave it.

A plow blade angles snow to one side, so it works better on narrow lanes where you cannot pile snow ahead of you. It puts more sideways stress on the mount. If your tractor is small, keep that in mind before choosing a long angled blade.

Think about where the snow will go. If you have a wide-open place to dump it, a pusher is simple and efficient. If you need to cast it aside along a lane, a plow is the better tool.

Other machines: skid steer, F250, ATV and 1025R

Skid steer: These machines are usually sized by rated operating capacity, and a pusher should match that rating. Check the quick-attach style as well, since mounts differ between brands.

F250 and other pickups: Trucks use mounted plows, not loader pushers. Size the plow to the truck's front axle rating and the plow maker's fit list for your exact model and year. Do not guess from blade width alone.

ATV: A plow blade should suit the ATV's size and mount kit. A blade that is too heavy or too wide can strain the frame and make steering harder.

John Deere 1025R: This is a subcompact tractor, so the 60 inch to 72 inch guidance above is the right place to start. Confirm your loader's lift rating and the pusher maker's fit chart before buying.

A quick checklist before you buy

Run through these steps to narrow your choice.

  • Find your tractor's weight and horsepower in the manual.
  • Check the loader's lift rating and the mount type, such as a quick-attach.
  • Measure your widest and narrowest gates or lanes.
  • Estimate the snow pile area where you will push, and make sure it has room.
  • Compare the pusher's own weight with the loader's limit.
  • If two sizes both fit, choose the narrower one for better control.

Safety notes for pushing snow

Wear hearing protection if your tractor has no cab, and keep your eyes protected from blowing snow and ice. Go slowly near fences, posts and buried edges, because a pusher can catch them and jolt the machine.

Keep the loader low while you drive. A raised, loaded pusher raises the center of gravity and can tip a small tractor on a slope. Never work under a raised loader unless it is properly supported. Shut off the engine before clearing a jam or checking the mount.

Finish the edges by hand

Even a good pusher leaves snow at doorways, steps and tight corners. A light hand tool handles those spots without bringing the tractor close to the house. Our best snow shovel page compares blade width, weight and handle shape so you can pick one that suits you.

One example is the True Temper poly shovel and pusher. It lists an 18 inch combination blade and weighs 3 lb, the lowest weight among the shovels we compare. Weights across that group run from 3 lb to 4.8 lb, and every lift adds up on heavy snow. If you want a second look at options, see how these shovels compare side by side on blade size and handle design.

Frequently asked questions

Is a bigger snow pusher always better?

No. A wider pusher moves more snow per pass but needs more tractor weight and loader strength. If it is too big, the tractor may slide or the loader may strain, so you gain nothing.

Can I use the same pusher on a skid steer and a tractor?

Only if the mount and ratings match. Quick-attach styles differ, and a skid steer usually has a higher rated capacity than a small tractor loader. Check the pusher maker's fit list for both machines.

Should I buy the pusher before the tractor loader?

Choose the loader and tractor first. The pusher has to fit the mount and the lift rating, so it makes sense to treat the pusher as the final piece, not the starting point.

Does snow type change the size I need?

Yes. Wet, heavy snow adds a lot of load, so you may want a narrower pusher than you would for light, dry snow. If you often see slushy, packed snow, size down for control.

Compare the products