What Size Is a Torpedo Level? Length Guide
Most torpedo levels are between 6 and 12 inches long, and many sit around 9 inches. Pick a shorter one (about 6 to 8 inches) for tight spaces and pipe or conduit work. Pick a longer one (9 to 12 inches) when you need to span more distance.
The typical torpedo level length
A torpedo level is a short spirit level made for tight spaces. The usual range is 6 to 12 inches. Anything much longer starts to look like a standard box level, and anything much shorter is more of a pocket level.
If you want one number, 9 inches is a safe middle point. It fits a tool pouch, sits on most shelves and brackets, and still gives you a bit of reach. The tapered nose that gives the tool its name makes it easy to slide into a pocket or between studs.
Note that people sometimes search for how long a torpedo is. Here we mean the leveling tool, not anything else that shares the name.
Lengths in the models we compare
Our comparison pages list published specifications, so these are the maker's numbers. In our lineup, the shortest level is 6.25 inches and the longest is 12 inches. Weights among the models that list one run from 3.53 oz to 11.52 oz.
Length and weight do not always move together. A body material or a thick billet build can matter more than a few inches. The table below shows eight models from the lineup.
| Model | Length | Weight | Body or note |
|---|---|---|---|
| Klein Tools 935AB4V | 6.25 in | 5.9 oz | Billet aluminum, V-groove |
| Klein Tools 935RB | 8 in | 7.4 oz | Billet aluminum, tapered nose |
| Klein Tools 935RBP | 8 in | 6.72 oz | Pitch vial, V-groove |
| WORKPRO W062066 | 8 in | 7.04 oz | 4 magnets, 0.5 mm/m |
| Swanson Savage TL043M | 9 in | 11.52 oz | Billet aluminum, 4 magnets |
| Firecore FSL230PC | 9 in | 3.53 oz | Plastic body |
| BETHEL T-14A 9 | 9 in | Not listed | 4 magnets, V-groove |
| WORKPRO W062071AE | 12 in | 7.37 oz | Pitch vial, V-groove |
What each length is good for
Short levels, around 6 to 8 inches, shine where space is tight. Think of the gap between a pipe and a wall, the inside of an electrical box, or the space under a cabinet. They are also easy to carry all day.
Mid-length levels, around 9 inches, cover the widest range of home and trade tasks. They hold on a shelf bracket, a window frame or a run of pipe, and still fit in a pouch.
Long torpedo levels, around 12 inches, give you more length to read against. That helps when you are checking a longer run, such as a drain line, because a longer base averages out small bumps on the surface.
- 6 to 8 inches: tight boxes, conduit, small fixtures, pouch carry.
- 9 inches: general carpentry, shelves, pipe, light remodeling.
- 10 to 12 inches: longer runs, drain slope, spanning uneven surfaces.
Can you go smaller than 6 inches?
Yes, there are smaller pocket-style levels, and some brands sell compact versions of their torpedo lines. The tradeoff is accuracy in practice. A shorter base is more sensitive to a speck of dirt or a small ridge, so the bubble can read differently from one spot to the next.
For rough checks around the house, a very small level is fine. For anything you will see or measure later, such as a shelf or a conduit run, 6 inches is a sensible floor.
How to choose your length
Start with where you will use it most, then check the features that matter. Our best torpedo level page puts length, weight, vials, magnets and listed accuracy side by side, so you can compare them in one place.
Follow these steps:
- List your most common tasks, such as conduit, drain lines or shelf hanging.
- Measure the tightest space you work in and make sure the level fits it.
- Check the vial layout. Conduit bending calls for a 30 degree vial, and drain work calls for a pitch vial.
- Look for a V-groove if you work on round pipe, since it keeps the level from rocking.
- Compare weight and body material, since billet aluminum is built for site abuse while plastic is lighter.
Length is not the only spec
Vial accuracy is listed in mm/m, and a lower number means less allowed error. The figures on our page are 0.5 mm/m and 1 mm/m, and several makers do not publish one at all. If you do finish work, favor a level that states its figure.
Magnets let you stick the level to steel and keep both hands free. More magnets spread the hold, but many makers do not publish a count. You can see the full set of specs and how each pick stacks up on our torpedo level comparison.
Safety notes
A metal level is a conductor. Keep it away from live wires and open panels, and turn power off before you check anything inside an electrical box.
Wear safety glasses when you work overhead or when you drill or cut near the spot you are marking. If you are on a ladder, set the level down or clip it to your belt before you climb, so you keep a hand free. Strong magnets can also pinch skin, so keep fingers clear when snapping one onto steel.
Frequently asked questions
What is the most common torpedo level size?
Around 9 inches is the most common. It is long enough for general work and short enough for a pouch.
Is a torpedo level accurate enough for finish work?
It can be, if the maker lists a tight vial accuracy such as 0.5 mm/m. Check the published figure, and keep the base clean.
Does a longer torpedo level weigh more?
Not always. In our lineup the 12 in WORKPRO lists 7.37 oz, while the 9 in Swanson lists 11.52 oz because of its solid billet body.
Do I need a pitch vial?
Only for sloped work such as drain lines. A pitch vial reads slope in set steps, such as 1/8 inch per foot.
KLEIN TOOLS 935AB4VBest overall
KLEIN TOOLS 935RBLonger Klein for pipe
WORKPRO W062066Tight accuracy, four magnets