What Do the Different Colors of Pressure Washer Nozzles Mean?
The color on a pressure washer nozzle tells you its spray angle. Red is 0°, yellow is 15°, green is 25°, white is 40° and black is 65°, and a narrower angle means a harder, more concentrated hit. The red 0° tip is the strongest on contact, but it is also the one most likely to damage surfaces and hurt you.
The color chart at a glance
Most nozzle tips and sets follow the same color code. Each color marks the angle of the fan of water that leaves the tip. The listings for the 7-tip sets on our comparison data, such as the VORIGY, Hourleey and SEPLY sets, all use this same scheme.
Here is the standard chart, plus the two low-pressure tips that often come in a set.
| Color | Angle | Typical use |
|---|---|---|
| Red | 0° | Pencil-thin jet for rust spots, stuck-on residue and hard surfaces only |
| Yellow | 15° | Heavy cleaning on concrete, metal and stained masonry |
| Green | 25° | General cleaning of decks, fences, patios and siding |
| White | 40° | Gentle rinsing of vehicles, windows and painted surfaces |
| Black | 65° | Low-pressure soap application |
| Pink (soap) | Wide, low pressure | Applying detergent, per the VORIGY listing |
| Blue (rinse) | Wide, low pressure | Rinse mode, per the VORIGY listing |
Why the angle changes the strength
Your machine pushes out the same amount of water no matter which tip you snap on. The tip only decides how far that water spreads. A narrow angle packs the stream into a tiny spot, so the force per square inch of surface is high. A wide angle spreads the same water over a bigger area, so it feels softer.
That is why the color is really a shorthand for how aggressive you want to be. Think of it as a dial from "pinpoint" at red to "gentle" at black.
Which color is the strongest?
The red 0° tip hits hardest at the point of contact. It is the answer to "which nozzle is the strongest" in terms of impact. It also covers almost no area, so it is slow for big jobs.
A 0° stream can gouge wood, strip paint, etch concrete and cut skin. Treat it like a tool you use briefly and carefully, never for general cleaning.
Strength is a different question from pressure rating. A nozzle's PSI rating is the most pressure it can handle, not how hard it sprays. In our nozzle data, the SANLINGRIA turbo tip is rated for 5000 PSI, the highest of the 15 products we compare. That means it can be used on high-pressure machines, not that it cleans harder than a red tip on the same washer. Your washer sets the pressure, and the tip shapes it.
Turbo, soap and rinse tips
Not every nozzle follows the color chart. A rotating turbo tip spins a narrow jet in a cone, which covers more ground than a red tip while still giving a scrubbing action on tough grime. Turbo tips are usually sold as a single piece, and their color varies by maker. Our listings for the Xaxuqtu and SANLINGRIA tips describe them as rotating turbo nozzles with a ceramic core and stainless steel, rather than naming a color angle.
Soap tips work differently. They have a wide opening that drops the pressure so your washer can draw detergent through its siphon. Some sets mark the soap tip with a color such as pink, and some leave it unmarked, so check the product listing. If you want a refresher on detergent use, the pages for our best pressure washer nozzle picks note which sets include a soap nozzle.
Matching a color to the job
When in doubt, start wide and work narrower only if the dirt will not budge. Here is a simple way to choose:
- Washing a car, windows or painted trim: start with white 40°, and stay well back.
- Rinsing off siding, fences and decks: use green 25° or white 40°.
- Cleaning concrete driveways and stained patios: use yellow 15°, or a turbo tip for faster coverage.
- Removing rust or stuck-on residue from metal: try red 0° for short bursts, or yellow 15° first.
- Applying soap: use the soap tip, then switch to a rinse tip.
- Cleaning large flat areas: consider a surface cleaner attachment, which keeps the spray even. See our best pressure washer surface cleaner comparison.
Safety and fit checks before you spray
A pressure washer jet can cut skin, and the risk is greatest with narrow tips. Follow these basics:
- Wear safety glasses or goggles, closed-toe shoes and long pants. Gas machines are loud, so add hearing protection.
- Never point the wand at people, pets or your own feet, and never test the jet with your hand.
- Keep the wand in both hands and brace for the kick when you pull the trigger.
- Swap tips only with the trigger locked and the machine off or the pressure released. Make sure the quick connect clicks fully into place.
- On ladders or roofs, avoid pressure washing. The recoil can throw you off balance.
- Keep water, cords and outlets apart on electric machines, and use a GFCI outlet.
Check the specs, not just the color
Color only tells you the angle. Before you buy, match the nozzle to your machine. Check that the tip's PSI rating is at or above your washer's rating, that the orifice size suits your flow rate, and that the fitting matches your wand. Our data lists 1/4 inch quick connect fittings on many sets, and a 4.0 orifice on several turbo tips, such as the VORIGY and Xaxuqtu models, while the Tool Daily set lists a 2.5 orifice.
Also confirm the water temperature limit. The Xaxuqtu listing says to use fresh water only, up to 180°F. If you run a gas machine, our best gas pressure washer page can help you pair the machine with the right accessories, and a good hose helps too, as covered on best pressure washer hose.
Frequently asked questions
Are nozzle colors the same across all brands?
The main five, red, yellow, green, white and black, are widely used for 0°, 15°, 25°, 40° and 65°. Soap, rinse and turbo tips vary, so read the angle or label stamped on the tip.
Can I use a red 0° nozzle on my driveway?
You can, but it is a poor choice. It covers a tiny area, can etch concrete and leaves stripes. A yellow 15° tip or a turbo tip is usually faster and safer.
What if my nozzle has no color?
Look for the angle stamped on the tip, such as 15 or 40. If the markings have worn off, check the manufacturer's information before using it on a surface you care about.
Can I use a nozzle with a higher PSI rating than my washer?
Yes, as long as the fitting and orifice size match. The rating is a maximum limit. Never use a tip rated lower than your machine's pressure.
VORIGY 01Best overall
SANLINGRIA NozzleTip001Highest pressure rating
Hourleey 7 Nozzle TipsSeven-tip set with holder