Guide

What Are Vise Grips Used For? Common Jobs and How to Pick the Right Pair

Vise grips are locking pliers. They clamp onto a part and stay locked, so you can use them as a portable clamp, a stripped-bolt remover or an extra hand. Curved jaws grip round and rounded parts, long nose jaws reach tight spots, and C-clamp styles hold flat work together.

Updated 2026-11-12 · Based on published specifications and maker information

Top picks from our best vise grips comparison

What vise grips actually are

"Vise-Grips" started as a brand name from IRWIN, but most people now use it for any locking pliers. You may also see the name written as vice grips. The tool is the same.

Regular pliers only grip while you squeeze. Locking pliers use a toggle mechanism. You squeeze the handles until the mechanism snaps over center, and the jaws stay clamped without any hand effort. A release lever or trigger opens them again.

That one feature explains almost every use. The tool holds something firmly so your hands are free for another task.

The most common jobs for vise grips

Most people reach for locking pliers when a normal tool cannot get a good hold. These are the jobs they handle best:

  • Removing a rounded or stripped nut or bolt head. Clamp the curved jaws tight onto the damaged head and turn.
  • Holding a part steady while you drill, cut, sand or file it.
  • Working as a quick clamp to hold two pieces together while glue dries or while you fasten them.
  • Holding metal pieces in place for welding or brazing, since the jaws stay put without a helper.
  • Gripping a small fastener, a staple or a bent nail that your fingers cannot hold, especially with long nose jaws.
  • Twisting and cutting wire when the pliers have a built-in wire cutter.
  • Holding a round rod, pipe or tube so it does not spin while you work on it.
  • Acting as a temporary handle on a part that is too small or awkward to hold.

Which jaw style fits which job

The jaw shape changes what the tool does well. Our best vise grips page groups the options by jaw style, and the table below summarizes the basic differences.

Jaw styleBest forWatch out for
Curved jawRound stock, rounded nuts and bolt heads, general grippingCan mark soft or finished surfaces
Long noseTight spaces, small fasteners, narrow materialLess clamping force than larger curved jaws
Straight jawFlat material and holding parts squareNot ideal for round or rounded parts
Locking C-clampHolding parts together, reaching around edges and bendsWide opening needs room around the work

What size to expect

The 7 in and 10 in sizes are the most useful for general work, according to our buying guide. Smaller pliers suit fine work, and larger ones grip bigger parts.

Published specs show how much sizes differ. The WORKPRO 7 in curved jaw pliers list a weight of 0.7 lb, along with chrome vanadium steel and a wire cutter. The IRWIN 4 in long nose pliers list a jaw capacity of 1.625 in. For a sense of range in a set, the DEKOPRO 3-piece set includes 7 in and 10 in curved jaw pliers with listed jaw capacities of 1-3/4 in and 2-1/2 in, plus a 6-1/2 in long nose and a 6 in locking C-clamp.

Pick the size by the work. If you mostly handle bolts and small pipe, a 7 in curved jaw is a sensible first tool. If you hold larger parts, the 10 in is the one to add.

When vise grips are the wrong tool

Locking pliers are a strong grip, but they are not the best answer every time. Their teeth bite into the surface, so they can chew up nuts and bolts that are still in good shape. If a wrench or socket fits, use that first.

They also leave marks on soft metal, painted parts and anything with a finished surface. For those jobs, use a clamp with padded jaws or add a scrap of wood or cloth between the jaws and the work.

Finally, do not use them as a hammer or as a lifting hook. The jaws and the toggle are made for gripping, not striking.

Safety notes

Locking pliers can slip, and a slipping tool can hurt your knuckles or send a part flying. A few habits help:

  • Wear safety glasses when you cut wire, drill or grind a clamped part, and when you free a stuck fastener that may snap.
  • Wear work gloves for sharp or hot parts. Metal held for welding stays hot long after you finish.
  • Do not clamp onto live electrical wiring or an energized circuit. Shut off and lock out power first.
  • Do not clamp onto gas lines or pressurized lines. Crushing the pipe can cause a leak.
  • Set the adjusting screw so the jaws lock firmly with a solid squeeze. If the lock feels loose, the grip may fail.
  • Keep fingers clear of the jaw edges and the handle pinch point when you release the lock.

How to choose a pair

Start with the jobs you do most. A single 7 in curved jaw covers many tasks. If you often work in tight spaces, add a long nose pair. If you clamp parts together, look for a set that includes a locking C-clamp.

Then look at the build. Chrome vanadium or heat-treated alloy steel resists wear, and nickel plating helps against rust. An adjusting screw lets you set clamping pressure for each job, and a trigger release opens the jaws with one hand.

If you want several sizes at once, our best vise grips comparison includes single tools and sets, so you can line up the specs side by side before you decide.

Frequently asked questions

Are vise grips and vice grips the same thing?

Yes. Both names refer to locking pliers. "Vise-Grip" is the original IRWIN brand name, and "vice grips" is a common spelling of the same term.

Can vise grips remove a stripped bolt?

Often, yes. Clamp curved jaws tightly onto the rounded head, lock them, and turn. This works best when the head still sticks out enough to grip. It can damage the fastener, so plan to replace it.

Do vise grips work as a welding clamp?

Yes, many people use them to hold metal parts in place for welding. Wear eye protection and gloves, and remember that the jaws get hot.

How do I release the lock?

Pull the release lever or trigger. On pliers with a trigger release, you can do this with one hand. If the jaws are hard to open, loosen the adjusting screw a turn or two.

Compare the products