Guide

Power Screwdriver vs Impact Driver: Which Should You Use?

Use a power screwdriver for light, careful work like furniture assembly, hinges, outlet covers and electronics. Use an impact driver for long screws, hardwood, decking and any job where a screw needs real force. If you only do small household tasks, a power screwdriver is usually enough. If you build or repair things with lumber, an impact driver earns its place.

Updated 2026-11-12 · Based on published specifications and maker information

Top picks from our best power screwdriver comparison

The short version

A power screwdriver is a small, low-torque tool built for control. It spins steadily, stops when you release the button, and often has adjustable torque settings so it will not strip a screw or crack a part.

An impact driver is a much stronger tool. When a screw gets hard to turn, an internal hammer mechanism adds quick rotational taps on top of the motor's spin. That helps it sink long fasteners without you fighting the tool.

So the question is really about the screw. Small, delicate or easy screws point to a power screwdriver. Big, long or stubborn screws point to an impact driver.

How each tool works

A power screwdriver uses a motor and a gearbox to turn the bit at a steady, modest force. Many models add a clutch or torque setting, plus a manual mode so you can finish a tight screw by hand. Our best power screwdriver page shows torque across the models we compare ranging from 0.2 to 10 N·m, which is a wide spread for such a small category.

An impact driver works differently. Under light load it spins like any driver. Under heavy load, the hammer and anvil inside deliver rapid bursts of rotation. This reduces the twisting force your wrist has to resist, which is why the tool feels less punishing than a drill on big screws.

The trade-off is finesse. Those bursts can overdrive small screws, strip soft heads and crack thin material if you are not careful. They are also loud.

Side-by-side comparison

This table sums up the general differences. Impact driver figures are described in broad terms because they vary a lot by model. The power screwdriver numbers come from the specs on our comparison page.

FeaturePower screwdriverImpact driver
Best forFurniture, hinges, electronics, light fixturesDecking, framing, lag screws, hardwood
TorqueFrom 0.2 to 10 N·m across the models we compareConsiderably higher, varies by model
ControlFine, with torque settings and a manual modeLess delicate, easy to overdrive small screws
Size and weightPen-sized or compact, such as 0.55 lb to 2.67 lb in our dataLarger and heavier, built around a bigger battery
NoiseQuietLoud when the hammer engages
BitsStandard bits, often with a small kitImpact-rated bits recommended
Power sourceSmall built-in battery, often USB-C chargingRemovable tool battery, usually from a larger system

When a power screwdriver is the better choice

Pick a power screwdriver when the job is repetitive but light. Assembling flat-pack furniture is the classic example. You can drive dozens of screws without tiring your wrist, and a torque setting keeps you from pulling a screw through particleboard.

It also suits fragile work. For phones, laptops and game consoles, a precision model with very low torque is the safer tool. The STREBITO in our data offers 5 torque levels up to 0.5 Nm, with a 50-bit set that includes Pentalobe and Tri-Wing bits, which are common in electronics.

Some power screwdrivers go further than you might expect. The Tilswall W122 lists a torque range of 2.6 to 10 N·m, and the DEWALT 4V lists 360 RPM with 6-stage torque control. These can handle shelves, bed frames and similar household fixing.

  • Assembling furniture and shelving
  • Swapping hinges, cabinet hardware and outlet covers
  • Repairing electronics with small, delicate screws
  • Working in tight spots where a larger tool will not fit
  • Tasks where stripping or cracking a part is the main risk

When an impact driver is the better choice

Choose an impact driver when screws are long, thick or going into dense material. Deck boards, fence frames, subfloor, lag screws and structural fasteners all fall here. A power screwdriver will stall, overheat or simply give up on that kind of work.

An impact driver also saves effort when you have many screws to drive in a day. Because the hammer action does the hard part, your hand and forearm feel less strain. Our best impact driver page lines up the options if you decide this is the tool you need.

Bits matter more here. Impact drivers put a lot of shock through the bit, so standard bits can snap or round off. Look for bits marked as impact-rated, and see our best impact driver bit set comparison if you want a full kit.

How to decide in four steps

If you are still unsure, work through these steps in order.

  • Look at your screws. If most are small or medium and driven into soft material, lean toward a power screwdriver.
  • Think about the material. Thin panels, plastic and electronics need low torque. Hardwood and lumber need more.
  • Consider how often you work. A few small jobs a year do not justify a heavy tool. Regular projects do.
  • Check storage and power. A compact USB-C rechargeable screwdriver fits in a drawer, while an impact driver usually needs a battery system and a bigger case.

Safety notes

Wear safety glasses with either tool. Bits can slip, break or throw fragments, and eye injuries happen fast.

Wear hearing protection when using an impact driver for more than a few seconds at a time, especially indoors or in enclosed spaces. The hammer mechanism is loud.

Clamp or hold your workpiece firmly, and keep your free hand away from the bit's path. A bit that slips off a screw head can hurt you or the surface. When working on ladders or other heights, use a tool you can control with one hand and keep your balance first.

Before drilling or driving screws into walls, check for hidden wiring and pipes. Switch off the power to that circuit if you are unsure.

Do you need both?

Many households get by with one tool for years. If your work is mostly assembly and small repairs, a power screwdriver covers it. If you are building decks or framing, an impact driver is the more practical choice.

Plenty of people who do a bit of everything end up owning both. The two tools do not overlap as much as the names suggest, and each one feels clumsy when used for the other's job.

Frequently asked questions

Can an impact driver replace a power screwdriver?

Not for delicate work. It can drive small screws, but it is harder to control and may strip heads or crack thin material.

Is a cordless screwdriver the same as an electric screwdriver?

In everyday use, yes. Both terms describe a battery-powered screwdriver. Some are rechargeable by USB-C, and some have a built-in battery.

Can a power screwdriver drive screws into wood?

Yes, for short screws in softer wood. Models such as the HOTO kit and the Tilswall are described as suitable for shelves and bed frames. For long screws in hardwood, use an impact driver.

Do I need special bits for an impact driver?

Impact-rated bits are strongly recommended. Regular bits can snap under the repeated shock.

Is an impact driver the same as an impact wrench?

No. An impact driver takes hex-shank bits and drives screws. An impact wrench uses a square drive for nuts and bolts, such as on a car. Our best impact wrench for automotive use page covers that tool.

Compare the products