Guide

How to Change a Smoke Detector Battery and Which Size to Use

Most smoke detectors with a replaceable battery take a 9V battery. Some models use AA batteries instead, and sealed 10-year alarms have no battery you can swap. To change it, switch off power if the alarm is hardwired, open the battery door, swap in a fresh battery of the type printed in the compartment or manual, and press the test button.

Updated 2026-11-12 · Based on published specifications and maker information

Top picks from our best smoke detector comparison

Which battery size does your smoke detector take?

The short answer is that it depends on the alarm. The most common size for a battery-powered or hardwired alarm is the 9V, a small rectangular battery with two snap terminals on top. Some alarms take AA batteries instead.

The surest way to know is to open the battery door and look. The battery type is usually printed or molded inside the compartment, and it is also listed in the manual or on the alarm's label. Use the type the manufacturer names. Swapping in a different chemistry or size can cause chirping or shorten the battery's life.

Here is how the common alarm types differ:

Alarm typeBattery you replaceWhat to check
Battery-only alarm with a replaceable batteryUsually 9V, sometimes AALook inside the battery compartment for the type
Hardwired alarm with battery backup9V backup battery, as listed for the BRK 9120BBackup only runs the alarm during an outage
Sealed 10-year battery alarmNone, the battery is built inReplace the whole alarm at end of life

Before you start: safety and prep

Changing a battery is simple, but a few precautions keep it safe. Alarms sit on ceilings and high walls, so most of the risk comes from reaching them.

Use a sturdy step stool or ladder on a flat floor, and ask someone to steady it if you can. If your alarm is hardwired, turn off the circuit breaker before you twist it off the mounting plate. Wires behind the alarm can carry household voltage, so do not touch them with the power on.

  • Buy the correct battery before you take the old one out.
  • Check the battery's expiration date on the package.
  • Have a step stool and a flashlight ready.
  • Let others in the home know you are testing alarms, since the test sound is loud.
  • Keep your face away from the alarm when you press the test button to protect your hearing.

How to change the battery step by step

The exact door or tab varies by model, but the process is nearly the same everywhere. Some alarms have a front-access compartment, such as the First Alert SMI100. Others use a side-load compartment, such as the BRK 9120B.

Follow these steps:

  • Turn off the breaker first if the alarm is hardwired.
  • Twist the alarm counterclockwise off its mounting plate, or open the battery door in place if it has front access.
  • Disconnect and remove the old battery. A 9V battery pulls off its snap connector, while AA batteries slide out.
  • Match the plus and minus marks on the new battery to the markings in the compartment, then insert it.
  • Close the battery door. Many alarms will not seat properly if the battery is not fully in place.
  • Remount the alarm and turn the power back on if you shut it off.
  • Press and hold the test button until the alarm sounds. If it stays silent, recheck the battery contacts.

Hardwired alarms and backup batteries

A hardwired alarm runs on household power and uses a battery only as backup during a power outage. That backup battery still wears out, so it still needs changing.

Models such as the First Alert SMI100-AC and the BRK 9120B are listed with battery backup. When one alarm in a wired interconnect sounds, the others sound too, so test the whole set after you swap batteries.

If you are weighing wired against battery models, our best smoke detector comparison lines up power source, interconnect and warranty side by side.

Sealed 10-year alarms: no battery to change

Some alarms skip the swap entirely. The Kidde 20SD10, the X-Sense SD2J0AX and the First Alert SM310 are all listed with a 10-year sealed battery, and the listed battery life is 10 years. You cannot open them to replace the battery.

When the alarm chirps at the end of that period, you replace the whole unit. Models with an end-of-life warning, such as the Kidde 20SD10 and First Alert SM310, tell you when that time has come.

That is a good fit if you dislike ladders or late-night chirps. It also suits rentals and hard-to-reach ceilings. If you would rather skip the maintenance, our best smoke detector page shows which models use sealed batteries.

How often to change it and why it still chirps

Many manufacturers suggest replacing replaceable batteries about once a year, or right away when the alarm chirps to say the battery is low. Check your manual for its schedule. Test each alarm monthly with the test button, whatever the battery type.

If the alarm keeps chirping after a fresh battery, try these fixes:

  • Make sure the battery is fully seated and the door is closed all the way.
  • Check that you used the correct size and type.
  • Remove the alarm, hold the test button for several seconds to clear leftover charge, then reinstall.
  • Look at the manufacture date. Smoke alarms wear out, and many makers say to replace the whole alarm after about 10 years.
  • If it still chirps, the unit may have reached the end of its life and should be replaced.

Frequently asked questions

Can I use a rechargeable battery in a smoke detector?

Check the manual first. Many manufacturers specify non-rechargeable batteries, because rechargeables can lose power faster and may trigger low-battery chirps. Use what the maker recommends.

How much do smoke detector batteries cost?

We do not list prices on Comparabo, and they vary by brand and store. A sealed 10-year alarm removes battery purchases, so factor that in when comparing models.

Do I need to replace the battery if the alarm is hardwired?

Yes. The backup battery protects you during outages, and it still weakens over time. Swap it on the schedule in your manual and test the alarm afterward.

Why does my alarm chirp at night?

Room temperature often drops overnight, which can make a weak battery show its low-battery warning. Replace the battery or check the end-of-life status.

Should I replace all alarms at once?

Replace batteries as each alarm needs them, but test every alarm afterward. On linked systems, check that all units sound together.

Compare the products