How Much Paint Do You Need for Trim and Doors?
For one room with a door or two, a quart is usually enough for two coats. For whole-house trim and doors, plan on about 3 to 4 gallons. To get your own number, add up the surface area, double it for two coats, and divide by the coverage printed on the can.
The quick formula
Paint math for trim and doors is simple once you measure in square feet. You find the area, multiply by the number of coats, and divide by what one can covers.
Trim is narrow, so it is easier to measure in linear feet first and convert. Here is the whole process:
- Count your doors and note whether you are painting one side or both, plus the edges.
- Measure the length of baseboard, door casing, window casing and any crown molding in feet.
- Multiply each trim length by its width in feet (inches divided by 12) to get square feet.
- Add everything together, then multiply by the number of coats (usually two).
- Divide by the coverage on the can, then round up to the next size.
How much paint one door takes
A standard interior door is about 32 inches wide and 80 inches tall. That works out to roughly 18 square feet per side, or about 36 square feet for both sides. Add a little for the edges and a bit more if the door has raised panels, since the profiles add surface.
Two coats on both sides means about 72 square feet of coverage per door, plus allowances for panels and edges. That is why a single quart can handle several doors but not a whole house of them.
If you are only painting the side that faces a room, halve the figure. Exterior doors are usually painted on the outside face and edges, and you should choose a paint that names outdoor use. Our best paint for exterior doors comparison covers those options.
How much paint your trim takes
Trim looks small but adds up. Baseboard that is 5 inches tall is about 0.42 feet wide, so every 10 linear feet is roughly 4 square feet of surface. Door and window casing is often narrower, around 2 to 3 inches, so 10 linear feet is closer to 2 square feet.
For a 12 by 12 foot room, the walls total about 48 feet. Subtract the door opening and you have roughly 45 feet of baseboard, or about 19 square feet. Casing, a window sill and one door might add another 25 to 30 square feet. That whole room fits comfortably in a quart with room to spare.
Measure your own trim rather than trusting a rule of thumb. Baseboard height, crown molding and chair rails vary a lot from house to house.
What the can says: coverage on the products we compare
Coverage is the number that turns your square footage into a purchase. The figures below come from the published specs on our best paint for trim and doors comparison. Not every product lists coverage, so check the label on whatever you buy.
A gallon is 4 quarts, so the 4 qt cans are gallons. Coverage is stated for one coat on a smooth surface. Rough or bare wood soaks up more, and brushing narrow trim wastes a little paint.
| Product | Can size | Listed coverage |
|---|---|---|
| Rust-Oleum Painter's Touch (semi-gloss) | 1 qt | 120 sq ft |
| INSL-X Cabinet Coat (semi-gloss) | 1 qt | 87 to 112 sq ft |
| INSL-X Cabinet Coat Semi-Gloss | 4 qt | 350 to 450 sq ft |
| INSL-X Cabinet Coat Satin | 4 qt | 350 to 450 sq ft |
| Zinsser Perma-White (semi-gloss) | 4 qt | 300 to 400 sq ft |
| Modern Masters Front Door Paint (satin) | 1 qt | 100 sq ft |
| Giani Nuvo Cabinet Makeover Kit (satin) | Kit | 100 sq ft |
Worked example: a whole house
Say a house has 10 interior doors painted on both sides, about 300 linear feet of 5 inch baseboard, and roughly 100 square feet of casing and other trim.
Doors: 10 doors at about 36 square feet each is 360 square feet. Baseboard: 300 feet at about 0.42 feet wide is 126 square feet. Add 100 square feet of casing and you get about 586 square feet for one coat.
Two coats doubles that to roughly 1,170 square feet. Dividing by 450 square feet per gallon gives about 2.6 gallons. Dividing by 350 gives about 3.3 gallons. So 3 gallons is the likely minimum, and 4 gives you a safety margin for touch-ups and second coats on bare spots.
If you are mixing sizes, the math works in your favor: buy gallons for the big runs and a quart for leftovers and small rooms.
What makes you use more paint
The formula gives a baseline. A few things push the real number up:
- Bare or porous wood, which drinks the first coat and may need primer.
- A big color change, such as dark trim going to white, which can need an extra coat.
- Spraying, which wastes more paint than a brush.
- Heavily profiled doors and ornate molding, which have more surface than the flat measurements suggest.
- Rough surfaces that were not sanded and cleaned first.
Safety notes before you start
Sanding trim creates dust, so wear a dust mask and eye protection. If your home was built before 1978, test for lead paint before sanding or scraping, and follow a certified lead-safe process if the test is positive.
Open windows and run a fan when painting indoors, even with low-odor water-based paint. Use a stable stepladder for crown molding and upper casing, and do not lean out to reach.
Check the maker's temperature range before painting. For example, the INSL-X Cabinet Coat listings say to apply when air, product and surface temperature are between 50 and 90 degrees F.
Frequently asked questions
Should I buy extra paint beyond my calculation?
A small cushion is smart. Rounding up to the next can size usually covers touch-ups and uneven absorption, and a leftover quart is handy for future scuffs.
Can I use my wall paint on trim and doors?
You can, but wall paint is often not built for chips, scuffs and wiping. Trim and door paints usually have a harder finish and a higher sheen that cleans more easily.
Do I need primer, and does it change how much paint I buy?
Bare wood, stains and big color changes often call for primer. It is bought separately, and a good primer can mean the finish coats cover more evenly, which may spare you a third coat.
Is it better to buy one gallon or several quarts?
One gallon is easier to keep consistent in color and sheen across a large job. Quarts make sense for a single room or a few doors.
Rust-Oleum 1993502Best overall
INSL-X CC560109A-01Best for whole-house trim
Rust-Oleum Home 372011Clearest dry and cure times