Can a Gate Latch Open From Both Sides?
Yes, but how it works depends on the latch. Most self-latching gravity latches open from the latch side with a fingertip lift, and they reach the other side with a pull string, a wire, or by reaching over the gate. If you want a true handle on both faces, you need a two-sided thumb latch or a through-gate lever set instead.
The short version: three ways to open a gate from both sides
A gate latch can work from both sides in a few different ways, and they are not equal. Some give you a full handle on each face. Others open easily from one side and need a small workaround on the other.
Knowing which kind you are shopping for saves you from buying a latch that only looks two-way in the photo.
- Two-sided hardware: a thumb latch or lever handle on each face, joined through the gate. You press or lift on either side.
- Gravity latch with a remote release: a bar drops into a catch by itself. A pull string or wire lets you lift it from the far side.
- Reach-over use: a standard gravity latch on a gate low enough to reach across and lift by hand.
What "both ways" can actually mean
People use the phrase for two different things. One is that the gate swings both inward and outward. The other is that you can operate the latch from both sides of the gate. A good latch should be clear about each.
Swing direction matters because a latch built for outswing gates only will not catch properly if your gate opens toward you. On our best gate latch to open from both sides page, the top five picks list inward and outward swing, while National Hardware's N184-861 is listed as outswing only.
Operating from both sides is a separate question. Check the listing for a pull string, wire, or a second handle, and do not assume it is included.
How gravity latches handle the far side
A gravity latch has a bar that falls into a catch when the gate closes. No spring is needed. From the latch side you lift the bar with a fingertip, and the gate swings open.
The far side is the tricky part. The lift lever usually sits on the side where it is mounted. To open the gate from the other face, you have three options: reach over the top, add a pull string, or run a wire through.
HILLMASTER lists a pull string on the 0011 and a wire on the 666. Both are described as self-latching with a fingertip release, and both are listed for inward and outward swinging gates. That makes them a reasonable starting point if you want a gravity latch that can be worked from either side.
If you are choosing between several models, our best gate latch page puts the wider range on one spec sheet.
Comparing your options
The table below sums up how each approach handles the far side, based on how these latches work in general. Product-specific details are in the listings.
For gates that get heavy use, such as farm or side yard gates, also look at the best heavy duty gate latch comparison.
| Option | Near side | Far side | Self-latching |
|---|---|---|---|
| Gravity latch with pull string or wire | Fingertip lift | Pull string or wire | Yes |
| Gravity latch, reach-over | Fingertip lift | Reach over the gate | Yes |
| Thumb latch with handles on both faces | Press the thumb piece | Handle or lever | Depends on model |
| Through-gate lever set | Lever | Lever | Depends on model |
How to make a gate open from both sides
If your current latch only works from one side, you can often adapt it without replacing the gate. The goal is a way to lift or release the latch from the far face.
Start by checking how the latch is mounted. Then pick the simplest fix that suits your gate height and who uses it.
- Tie a string or thin cord to the lift bar and route it through a small hole in the gate, so you can pull it from the other side.
- Install a second release, such as a thumb latch, that connects through the gate to the same bolt.
- Lower the latch, or choose a lower mounting spot, so it is easy to reach over the top.
- Pick a latch that already lists a pull string or wire, so the parts are designed to work together.
Fit, finish and security checks
Before you buy, measure the gap between the gate and the post. The HILLMASTER 666 lists a gap of up to 1-9/16 in, and it is 4 in long. The HILLMASTER 0011 is listed at 9 in and 1.76 lb, with 12 mounting screws included.
Material and finish decide how a latch holds up outdoors. Both HILLMASTER models are listed as steel with a black powder coat and zinc plating. Not every listing gives finish details, so treat durability as unconfirmed where they are missing.
Also confirm left or right mounting. The HILLMASTER 0011 and 666 are both listed as suitable for left or right hand application.
If the gate guards a pool, a pet area, or a play space, think about who can reach the release. A pull string on the outside can also let a child or a dog open the gate. Our best gate latch for dogs page covers options for pets. Most of the latches in our data can also be padlocked.
Safety notes
Pool and child safety gates should have a latch that a young child cannot easily reach or work. If you add a pull string or a second handle, check that it does not create an easy path for a child to open the gate.
Wear safety glasses when drilling or driving screws into metal or hard wood, and use hearing protection with loud power tools. If you work on a tall gate or fence, use a stable ladder on firm ground. Check for buried wires or pipes before drilling deep holes near a gate post.
Frequently asked questions
Is there a gate lock that can be opened from both sides?
Yes. Through-gate lever sets and thumb latches with a handle on each face are made for that. For a locked setup, look for a model that accepts a padlock or a keyed cylinder on either side.
What type of gate can open both ways?
A gate can swing both ways if it has a double-acting hinge, or if the hinges and stops allow movement in both directions. Standard gates swing one way and rest against a stop. The latch must match the swing direction you choose.
What type of door lock can be opened from both sides?
A passage set or a keyed entry lock with a key cylinder on each side opens from both faces. Double-cylinder deadbolts work this way, but they may be restricted in some places for fire-safety reasons, so check local rules.
Can I padlock a latch that opens from both sides?
Often yes. HILLMASTER lists the 0011 and 666 as padlockable with an ordinary padlock, which is not included. Check the hasp or hole size on any model you are considering.
HILLMASTER 0011Best overall
HILLMASTER 666Compact two-way gravity latch
SANKINS 782902358389Pool and baby gate use