Best Spade Bit Sets in 2027

The Jorgensen 71101 leads our ranking. It holds 14 pieces: 13 spade bits and one quick-load connector. The bits run from 0.25 in to 1.5 in, and the listing names 13 sizes, including 11/16 in. That range covers common wood drilling, from small holes to wiring and pipe runs.

Each bit is 6 in long, which gives usable reach for thick boards. A threaded tip pulls the bit into wood, so it wanders less. Double cutting spurs score the edge to cut down breakout. Together these features suit most framing and cabinet holes. The shank is 1/4 in hex, and the listing gives a maximum speed of 1500 RPM.

The connector allows one-handed bit changes and works with any 1/4 in hex shank bit. The bits are carbon steel, a common choice for wood work, and the set ships in a pouch. The maker does not publish a set weight.

The WORKPRO W004521A ranks second. It has 13 spade bits from 0.25 in to 1.5 in, the same range as the top set. The steel is heat-treated medium carbon steel, and the listing mentions a polished head surface. Double cutting spurs help produce cleaner hole edges in wood. Together, that gives a broad size range for general wood work.

Here the listing is thinner. It does not list a threaded tip, a connector or a bit length. Without a threaded tip, the bit may need more pressure to start and hold its line. Buyers who want a long reach should check dimensions elsewhere before ordering. Pick it only if you can live without those features.

The 1/4 in hex shank has a groove to help stop slipping and fits most drill drivers and impact drivers. At 1.54 lb, it is the heaviest set among the four models that list a weight. The bits come in a pouch.

The Pinoze P008E002 ranks third and includes a 6 in quick-load extension. Fitted to a bit, it reaches 12 in, which helps in narrow or hard-to-reach spots. The extension also takes other drill bits and screwdriver bits. That makes the set useful for more than spade drilling. Extra reach is the main reason to choose this set.

The 13 spade bits run from 0.25 in to 1.5 in. The listing names 5/16 in but not 11/16 in, so the steps differ slightly from the top set. A threaded tip pulls the bit through wood, and double cutting spurs reduce breakout for cleaner holes.

The bits are premium alloy steel with a blackened finish for rust and corrosion resistance. The 1/4 in hex shank has a groove to reduce slipping, and the listing gives a maximum speed of 1500 RPM. The maker does not publish a set weight. Check that the bit sizes you need are in the list.

The Pinoze P008E001A ranks fourth. It comes with 13 spade bits and a 6 in extension rod, for 14 pieces. The listing says the rod extends the bits to 12 in. That is handy for narrow spaces, and the rod also fits other drill bits and screwdriver bits.

The bits are high carbon steel with comprehensive heat treatment for hardness and durability, and a polished head. The listing describes a large groove for chip removal and heat dissipation, plus double cutting spurs to reduce breakout. It does not list a threaded tip, so do not count on self-feeding.

The sizes run from 0.25 in to 1.5 in and include 5/16 in. The 1/4 in quick-change hex shank has a groove to reduce slipping. The set comes in a tool roll pouch. No set weight or bit length is published. Check the size list before buying, since 11/16 in is not named.

The Bosch Daredevil DSB5013P ranks fifth. It has 13 pieces covering 1/4 in to 1-1/2 in, and the listing names sizes including 11/16 in. The tip is a full-cone threaded design, which pulls the bit into wood for fast drilling. The listing also mentions spur and reamer tips for cleaner holes. Together, that covers the common wood sizes buyers look for.

Weight is listed at 0.26 lb, far less than the 1.54 lb of the WORKPRO set. That makes it easy to carry in its pouch. The shank is hex with a power groove to reduce slippage, and the bits have a contoured paddle for chip removal.

Several details are missing. The listing gives no bit material, bit length or connector, and it does not name double cutting spurs. Buyers who need a long reach or a quick-load connector should look higher up the ranking. Those gaps are why it sits below the sets above.