#1
Furuian SM955Furuian Pioneer Series Steel Toe Boot
Steel toe, puncture-resistant midsole and slip-resistant rubber outsole in one boot.
- Toe cap material
- Steel
- Weight per pair
- 2.6 lb
- Electrical hazard (EH) rated
- —
Safety Boots · 21 compared side by side
Best Safety Boots in 2027
The best safety boots start with a recognized standard. Look for ASTM F2413 certification first, then check the extras your site needs: electrical hazard rating, puncture-resistant midsole, slip-resistant outsole and waterproofing. After that, weight, shaft height and comfort features decide how the boots feel over a full shift. We put 21 products on one spec sheet so you can compare toe cap material, ratings and weight side by side. Where a maker does not publish a spec, we say so.
Quick answer
- Best overall: Furuian SM955 (#1, Best Score 84; toe cap material Steel, weight per pair 2.6 lb)
- Waterproof with puncture protection: KELODON 937 (#2, Best Score 79; toe cap material Steel, weight per pair 2.6 lb)
- Steel toe with EH rating: Timberland PRO TB1A1Q8O214 (#3, Best Score 77; toe cap material Steel, weight per pair 1.6 lb)
Ranked from 21 safety boots that met our standard, compared on ASTM F2413 rating, toe cap material, slip resistance.
As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.
Top picks
#2
KELODON 937KELODON 937 Steel Toe Work Boot
Steel toe, puncture-resistant midsole and waterproofing, plus a cushioned insole.
- Toe cap material
- Steel
- Weight per pair
- 2.6 lb
- Electrical hazard (EH) rated
- —
#3
Timberland PRO TB1A1Q8O214Timberland PRO Keele Ridge Work Boot
Steel toe, EH rating and waterproofing at 1.6 lb per pair.
- Toe cap material
- Steel
- Weight per pair
- 1.6 lb
- Electrical hazard (EH) rated
- Yes
Comparison table
Swipe or scroll sideways to see every model.| Spec | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Best Scoreout of 100 | 84 | 79 | 77 | 75 | 75 | 75 | 74 | 74 | 72 | 71 |
| Toe cap material | Steel | Steel | Steel | Steel | Composite (best in row) | Composite (best in row) | Composite (best in row) | Composite (best in row) | Composite (best in row) | Composite (best in row) |
| ASTM F2413 certified | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Electrical hazard (EH) rated | — | — | Yes | — | Yes | Yes | Yes | Yes | Yes | Yes |
| Puncture-resistant midsole | Yes | Yes | — | — | — | — | — | — | — | — |
| Slip-resistant outsole | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Waterproof | — | Yes | Yes | Yes | Yes | — | Yes | — | Yes | Yes |
| Weight per pairlb | 2.6 lb | 2.6 lb | 1.6 lb | 3.4 lb | 0.9 lb (best in row) | — | — | — | 5.0 lb | — |
| Boot shaft heightin | — | 6 in | — | — | 6 in | — | 6 in | — | 6 in | 6 in |
| Upper material | Suede | — | — | — | — | Nylon/fabric | — | Nylon/fabric | — | Full-grain leather (best in row) |
| Outsole material | Rubber | Rubber | Rubber | Lugged rubber | Heat-resistant rubber compound | E-TPU midsole, outsole not stated | Rubber | — | All-Weather TPU | Polyurethane |
| Width options | Width options available | — | Wide | — | Medium, Wide | — | — | — | Medium, Wide | Medium, Wide |
| Comfort technology | — | Cushioned insole, anti-fatigue design | — | EVA insole and midsole | Anti-Fatigue Technology, HoverSpring foam | E-TPU midsole, synthetic leather insole | Anti-Fatigue Technology, HoverSpring foam midsole | EVA midsole, synthetic leather insole | Anti-Fatigue Technology | Anti-Fatigue Technology, HoverSpring foam midsole |
| Closure type | — | — | — | — | BOA dial | Zipper with lace-up | — | Side zipper | — | Speed hooks |
Best in row— not published by the maker yet
How we chose
We reviewed 29 safety boots and kept only the 21 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.
- 4.0★ or higherAverage customer rating
- Proven demand25+ reviews or an Amazon sales rank
- In stockAvailable to order when checked
- 50%+ specs knownEnough data to compare fairly
In-depth reviews
These reviews are based on specifications and listing information. Each one covers what the listed specs mean for general workplace use.
Best overall
Furuian SM955Furuian Pioneer Series Steel Toe Boot
Steel toe with puncture protection and a suede upper
- Toe cap material
- Steel
- Weight per pair
- 2.6 lb
- Waterproof
- —
- Electrical hazard (EH) rated
- —
The Furuian SM955 has a steel toe cap and is listed as ASTM F2413 certified. That is the baseline for most workplace footwear rules. It also lists a puncture-resistant midsole, which matters on sites with nails, scrap metal or debris on the floor. Not every boot on this page lists that feature.
The outsole is rubber and is listed as slip resistant. The upper is suede with a microfiber lining, which the listing says is easy to clean. Weight is 2.65 lb per pair. Width options are available, which helps if standard sizing pinches. The maker does not publish a boot height.
Gaps matter here. No waterproof rating or electrical hazard rating is listed. If your site needs either, look at the Timberland PRO options in this lineup. The listing also cites ASTM F2413-18 for the toe cap and points buyers to customer service for questions. Comfort technology is not listed, so there is little to judge on cushioning.
Pros
- Steel toe, ASTM F2413 certified
- Puncture-resistant midsole listed
- Slip-resistant rubber outsole
Cons
- No waterproof rating listed
- No electrical hazard rating
- Buy it if
- you want steel toe and puncture protection for dry work.
- Skip it if
- your site requires electrical hazard or waterproof boots.
VerdictIt leads our ranking by covering the core protection checks, though it skips waterproofing and EH.
Waterproof with puncture protection
KELODON 937KELODON 937 Steel Toe Work Boot
Waterproof steel toe boot with a 6 in shaft
- Toe cap material
- Steel
- Weight per pair
- 2.6 lb
- Waterproof
- Yes (best of the reviewed tools)
- Electrical hazard (EH) rated
- —
KELODON 937 pairs a steel toe cap with a waterproof build, and it is listed as ASTM F2413 certified. The listing cites ASTM F2413-24, a newer revision than the F2413-18 cited by several others here. It lists puncture resistance too, with a Kevlar midsole named in the description. That covers the main workplace protection checks.
The outsole is rubber and slip resistant, which helps on wet or dirty floors. The shaft is 6 in tall. For comfort, the maker lists a cushioned insole and an anti-fatigue design. Weight is 2.65 lb per pair, the same as the Furuian. That is lighter than the NORTIV 8 Armadillo at 3.44 lb.
The main gap is electrical hazard protection, which is not listed. Width options and upper material are also not published. The listing names construction and manufacturing as target industries, so it fits general use. It is a sound match for wet, non-electrical work. Check the listing for sizing before you order.
Pros
- Steel toe with waterproof build
- Puncture resistance and slip-resistant outsole
- Cushioned insole, anti-fatigue design
Cons
- No electrical hazard rating listed
- Width options not published
- Buy it if
- you work in wet conditions without electrical risks.
- Skip it if
- you need electrical hazard rated boots.
VerdictIt ranks second by adding waterproofing and comfort features to the steel toe basics.
Steel toe with EH rating
Timberland PRO TB1A1Q8O214Timberland PRO Keele Ridge Work Boot
Steel toe boot with electrical hazard protection
- Toe cap material
- Steel
- Weight per pair
- 1.6 lb
- Waterproof
- Yes (best of the reviewed tools)
- Electrical hazard (EH) rated
- Yes (best of the reviewed tools)
The Keele Ridge has a steel toe cap that the listing says meets ASTM F2412-18a and ASTM F2413-18 impact and compression standards. It is also EH rated, which gives secondary protection against live electrical circuits. Among the five boots reviewed here, it is the only steel toe with that rating. Anyone near live circuits should note that.
It is also waterproof, and the listing says the membrane meets ASTM F1671-07. The outsole is rubber, described as heat resistant with enhanced slip, oil and abrasion resistance. Weight is 1.6 lb per pair, lighter than the steel toe boots ahead of it. A Wide width is listed.
Some gaps to know about. The maker does not list a puncture-resistant midsole, so look elsewhere if nails are a daily risk. The listing also notes ReBOTL material with at least 50% recycled PET. Boot height and comfort technology are not published. That makes it a good fit for general work where electrical contact is possible.
Pros
- Steel toe with EH rating
- Waterproof membrane
- 1.6 lb per pair
Cons
- No puncture-resistant midsole listed
- Boot height not published
- Buy it if
- you need EH protection and waterproofing together.
- Skip it if
- nails or sharp debris are a daily hazard.
VerdictIt ranks third as a steel toe boot that adds EH protection and waterproofing at a light weight.
EVA cushioning for long shifts
NORTIV 8 N245-WS2IB1AE14-G67MF-502587626974NORTIV 8 ARMADILLO-STL Steel Toe Boot
Steel toe boot with EVA cushioning and lugged outsole
- Toe cap material
- Steel
- Weight per pair
- 3.4 lb
- Waterproof
- Yes (best of the reviewed tools)
- Electrical hazard (EH) rated
- —
The NORTIV 8 Armadillo-STL has a steel toe and a rubber toe cap, and the listing says it meets ASTM 2413-18. It is listed as slip resistant, and the lugged rubber outsole is cited for ASTM F3445-13 traction. That is a useful detail for muddy or uneven ground.
Waterproofing is listed, but the listing says the static waterproof upper lasts for up to 4 hours. That suits splashes and wet floors better than long wading. Comfort comes from a mesh-covered EVA insole and a lightweight EVA midsole. Weight is 3.44 lb per pair, the highest among the five boots reviewed here.
It does not list puncture resistance or an electrical hazard rating. Upper material, boot height and width options are also not published. The listing names warehouses, mines, welding and landscaping as target uses, so it is aimed at general work. Buyers who want a lighter boot should compare the Timberland PRO models.
Pros
- Steel toe with rubber toe cap
- Lugged rubber outsole, F3445-13
- EVA insole and midsole
Cons
- Highest weight of these five
- No puncture or EH rating listed
- Buy it if
- you want cushioning for long walking shifts.
- Skip it if
- you want a light boot or EH protection.
VerdictIt ranks fourth as a cushioned, waterproof steel toe that carries the most weight of the group.
Lightest listed boot
Timberland PRO TB0A438GENRTimberland PRO Morphix BOA 6in Comp Toe
Light composite toe boot with a BOA dial
- Toe cap material
- Composite (best of the reviewed tools)
- Weight per pair
- 0.9 lb (best of the reviewed tools)
- Waterproof
- Yes (best of the reviewed tools)
- Electrical hazard (EH) rated
- Yes (best of the reviewed tools)
At 0.9 lb per pair, this is the lightest boot among the models that list weight on this page. That is a real advantage on long shifts, since less weight on your feet means less strain. The toe cap is composite, which is non-metallic, and the listing cites ASTM F2413-18 I and C ratings.
It is EH rated, slip resistant and waterproof. The BOA dial gives micro-adjustable fit, so you tighten it with a turn instead of lacing. Comfort comes from Anti-Fatigue Technology and HoverSpring foam. The shaft is 6 in, and Medium and Wide widths are listed. The outsole is a heat-resistant rubber compound.
The listing does not mention a puncture-resistant midsole, so check that before buying for nail-heavy sites. Upper material is also not published. The waterproof membrane is listed as meeting ASTM F1671-07. For general workplace use, it covers impact, electrical hazard, slip and water in a very light boot.
Pros
- Lightest among models listing weight
- EH rated with composite toe
- BOA dial and anti-fatigue foam
Cons
- No puncture-resistant midsole listed
- Upper material not published
- Buy it if
- you want light boots with EH and waterproofing for long shifts.
- Skip it if
- you need a listed puncture-resistant midsole.
VerdictIt ranks fifth but is the lightest listed boot, with EH, waterproof and comfort features.
Best among the reviewed tools
Buying guide
Check the ASTM F2413 rating
ASTM F2413 is the US standard for protective footwear. A certified boot has been rated for impact and compression at the toe. Confirm the rating on the listing, and check whether your employer requires a specific revision or extra codes.
Match extras to your hazards
EH rated boots give secondary protection against live electrical circuits. A puncture-resistant midsole guards against nails and sharp debris. A slip-resistant outsole helps on wet or oily floors. Pick only the features your workplace actually has, because not every boot lists all three.
Steel or composite toe
Steel toe caps are metallic. Composite toe caps are non-metallic and are often lighter. Both types can meet ASTM F2413. Choose steel if you want the traditional option, and composite if weight matters or you want a non-metal cap.
Weigh comfort and weight
Weight per pair ranges from 0.9 lb to 5 lb among the 13 products that list it. Lighter boots ease fatigue over a full shift. Look at the insole, midsole foam and width options too. Comfort features matter after the protection ratings are covered.
FAQ
What does ASTM F2413 mean on safety boots?
ASTM F2413 is the US performance standard for protective footwear. A boot listed as certified meets its toe impact and compression requirements. Extra markings can cover electrical hazard, slip resistance and puncture resistance, so read the full listing for the codes you need.
Are steel toe or composite toe boots better?
Neither is better for every job. Both can meet ASTM F2413. Steel is metallic. Composite is non-metallic and is described as lightweight in several listings. In this lineup, the lightest boot listed has a composite toe at 0.9 lb per pair.
Do I need electrical hazard rated safety boots?
Only if your work puts you near live circuits or energized parts. An EH rating gives secondary protection underfoot, not primary. The Timberland PRO Keele Ridge and Morphix BOA list it. The Furuian, KELODON and NORTIV 8 Armadillo do not.
Are waterproof safety boots worth it?
They help if you work outdoors or on wet floors. Check how the maker describes it. The NORTIV 8 Armadillo listing says its static waterproof upper lasts up to 4 hours, while the Timberland PRO listings cite a membrane meeting ASTM F1671-07. Not every boot here lists waterproofing.
Related comparisons
Share this comparison
Your own selection is kept in the link, so friends see the same side-by-side.