
VEVOR DY-8306VEVOR Pop Rivet Gun Kit
Five nosepieces, 230 rivets, 5 drill bits and a 15.75 in two-hand tool.
- Rivets included
- 230 pcs
- Nosepieces included
- 5 pcs
- Max rivet diameter
- 6.3 mm
Picking the best riveter tool comes down to a few specs. Check the maximum rivet diameter, since it sets the largest fastener you can set. Look at the tool type: two-hand levers give more leverage than one-hand guns. Confirm which rivet materials are supported, how many nosepieces come with it, and whether they change without tools. Starter rivets and drill bits help you begin right away. We put 22 products on one spec sheet so you can compare them directly.
Quick answer
Ranked from 22 pop rivet guns that met our standard, compared on max rivet diameter, nosepiece count, tool-free nosepiece change.
As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

Five nosepieces, 230 rivets, 5 drill bits and a 15.75 in two-hand tool.

Takes rivets up to 6.4 mm, the highest max diameter listed, with 350 rivets in 8 sizes.

A two-hand 13 in steel tool listing aluminum, steel and stainless steel rivet support.
| Spec | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Best Scoreout of 100 | 79 | 77 | 72 | 59 | 51 | 47 | 46 | 45 | 41 | 40 |
| Tool type | Manual two-hand lever (best in row) | Manual two-hand lever (best in row) | Manual two-hand lever (best in row) | Manual one-hand | Manual one-hand | Manual one-hand | Manual one-hand | Manual one-hand | — | Manual one-hand |
| Nosepieces includedpcs | 5 pcs (best in row) | 5 pcs (best in row) | 5 pcs (best in row) | 4 pcs | 4 pcs | 4 pcs | 4 pcs | 4 pcs | 4 pcs | 4 pcs |
| Max rivet diametermm | 6.3 mm | 6.4 mm (best in row) | 6.3 mm | 4.8 mm | 4.8 mm | 4.8 mm | 4.8 mm | 4.8 mm | 4.8 mm | 4.8 mm |
| Rivets includedpcs | 230 pcs | 350 pcs | 210 pcs | 200 pcs | 430 pcs (best in row) | 200 pcs | 200 pcs | 200 pcs | 225 pcs | 200 pcs |
| Rivet sizes includedsizes | — | 8 sizes (best in row) | — | 4 sizes | 4 sizes | 4 sizes | 4 sizes | 4 sizes | 6 sizes | 4 sizes |
| Tool-free nosepiece change | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | — | — |
| Rivet materials supported | — | Aluminum, stainless steel blind rivets | Aluminum, steel, stainless steel | Aluminum, steel, stainless steel | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum grip, steel mandrel | Aluminum |
| Body material | Die-cast aluminum alloy, carbon steel | Aluminum alloy | Steel | Aluminum alloy body, carbon steel handle | Aluminum frame, carbon steel handles | Aluminum alloy, carbon steel | High-carbon steel and aluminum alloy | Aluminum alloy die-casting | High quality steel | Heat-treated carbon steel |
| Grip material | TPR | Carbon steel handle | — | PVC | Non-slip PVC | — | Soft PVC | TPR | Rubber | — |
| Tool lengthin | 15.8 in | — | 13.0 in | 8.0 in | — | — | 8.0 in | — | — | 10.5 in |
| Carrying case | Yes | Yes | — | Yes | Yes | Yes | Yes | Yes | — | — |
| Drill bits includedpcs | 5 pcs (best in row) | — | — | 4 pcs | 4 pcs | 4 pcs | 4 pcs | 4 pcs | — | — |
| Warrantyyears | — | — | — | 2 years | — | — | — | — | — | — |
We reviewed 47 pop rivet guns and kept only the 22 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.
These reviews are based on specifications and listing information only. They cover the five highest-ranked products for this keyword.
Two-hand riveter with five nosepieces and a full kit
This VEVOR kit leads our ranking for a hand-operated riveter aimed at auto and sheet-metal repair. It is a manual two-hand lever tool. Two handles give more leverage than a one-hand gun, which matters when you set larger rivets in thicker panels. The max rivet diameter is 6.35 mm.
Setup is quick. It includes five nosepieces and changes them without tools. The listing says spare nosepieces store on the body and a built-in collector holds used mandrels. You also get 230 rivets, five drill bits and a carrying case. Five drill bits is the highest count among the models that list it.
The body is die-cast aluminum alloy and carbon steel, with a TPR grip. At 15.75 in, it is the longest tool among the models that list a length. The maker does not publish how many rivet sizes come in the box, so check that before you buy. Its warranty length is not listed.
VerdictA well-equipped two-hand kit that fits auto and sheet-metal repair, with only the rivet size count left unstated.
Biggest rivet capacity and eight sizes in the box
It ranks second on our list, and the NEXTACK NT300 takes the widest rivets of any product on the page, up to 6.4 mm. It is a manual two-hand lever tool, so you get leverage for thick sheet. The listing notes it is not for threaded rivet nuts.
The kit is built to start work right away. It includes 350 rivets in 8 sizes, and the listing says the 8 assorted lengths help with thick sheets. Five nosepieces swap without tools. A labeled, compartmented case keeps sizes sorted, and a removable catcher holds used mandrels.
Materials are listed as aluminum and stainless steel blind rivets. The body is aluminum alloy, and the handle is listed as carbon steel. The listing describes three heat-treated alloy steel jaws that grip rivets without slipping. The maker does not publish tool length, drill bits or a warranty term, so confirm those details before you order.
VerdictA strong pick for rivet capacity and size variety, though it leaves out drill bits and a published length.
Steel two-hand riveter that covers three rivet materials
AKKTOL's BT811 ranks third. Its pitch is simple: a long steel tool for two-handed work. At 13 in, the handles give leverage for rivets up to 6.35 mm. That is the 1/4 in class, which suits heavier sheet-metal repairs. This is a manual two-hand lever tool.
Material coverage is the clearest strength. The maker lists aluminum, steel and stainless steel rivets, which is wider than the aluminum-only support listed on several lower-ranked kits. Five nosepieces come with it, and they change without tools. The listing says spare nosepieces are stored in the handle and an o-ring holds each one in place.
The box holds 210 rivets in a plastic container, plus a bottle for spent mandrel shafts. The maker does not publish how many rivet sizes are included. The body is steel, and the grip material is not published. It also does not list drill bits, a carrying case or a warranty term, so this is a tool-first kit.
VerdictA capable two-hand tool for mixed materials, but it ships with fewer extras than the top two ranked kits.
Compact one-hand kit with a two-year warranty
The WETOLS WE-888 ranks fourth and takes a different approach. It is a one-hand tool at 8 in, tied for the shortest among the models that list a length. That makes it easy to carry and to use in tight spots, but it gives up leverage. Many DIY users accept that trade for small repairs.
Max rivet diameter is 4.8 mm, so it stops at the 3/16 in class. The listing warns that the 4.8 mm size is not recommended with steel or stainless steel rivets. For automotive work with bigger fasteners, that cap matters. Rivets listed as supported are aluminum, steel and stainless steel.
The kit is well stocked for starting. It has four nosepieces that change without tools, 200 aluminum rivets with 50 in each of four sizes, four drill bits and a case. Spare nosepieces sit on the handle. The body is aluminum alloy with a carbon steel handle and PVC grip. It also lists a two-year warranty.
VerdictA neat, well-stocked compact kit, best for small jobs rather than heavy automotive riveting.
Biggest rivet supply, but a smaller working range
WOBANK's WRGK-01 ranks fifth, and its main draw is volume. It ships with 430 rivets, the highest count among the 12 products that list one. With 4 sizes and 4 drill bits, you can start drilling and fastening the day it arrives. The listing also mentions an extra pair of gloves.
The limits are on the working side. Supported rivets are listed as aluminum only. For automotive and sheet-metal repairs that call for steel or stainless rivets, this tool is a poor fit. It suits light aluminum work.
Handling features are decent. Four color-coded nosepieces change without tools, and the listing mentions a safety lock and automatic rebound. The jaws are listed as SCM435 alloy steel. The frame is aluminum with carbon steel handles and a non-slip PVC grip. A blow-molded case holds the tool, bits and rivets, with individual rivet boxes.
VerdictA rivet-rich starter set for light aluminum jobs, but not the right pick for heavier automotive or sheet-metal repair work.
Best among the reviewed tools
Max rivet diameter sets your ceiling. Across these products it runs from 4.76 mm to 6.4 mm. If you set larger rivets in thick panels, pick a tool that reaches 6.35 mm or 6.4 mm. Smaller guns cover light repairs but stop earlier.
One-hand guns are short and easy to carry. Two-hand lever tools give more leverage for large rivets and thicker metal. Among the ranked models, the one-hand tools that list a length run 8 in to 10.5 in, while the two-hand VEVOR lists 15.75 in. Pick by the rivets you set.
Nosepieces must match the rivet size, so count matters. Five come with the top three here, and four with the rest. Tool-free changes save time on a jobsite. Without that feature you need a wrench, which the ISPINNER and Meiwaltee listings mention.
Rivet material matters. Several kits support only aluminum, while others list steel and stainless steel too. Then check the box: rivet count, rivet sizes, drill bits and a carrying case let you start work without extra shopping. Warranty terms are rarely published.
Our ranking leads with the VEVOR DY-8306, a two-hand lever tool with five nosepieces, 6.35 mm max rivet diameter and 230 rivets. The NEXTACK NT300 takes the widest rivets at 6.4 mm. Both fit heavier sheet-metal and auto repairs better than the smaller one-hand kits.
It depends on the nosepieces and the tool. In this lineup, max rivet diameter ranges from 4.76 mm to 6.4 mm. Most kits include nosepieces for 3/32, 1/8, 5/32 and 3/16 in rivets, and the top three add 1/4 in.
Not always. One-hand guns suit small aluminum repairs and tight spaces. A two-hand lever gives more leverage for larger rivets and tougher materials. If you want to set rivets up to 6.35 mm or 6.4 mm, choose a two-hand model.
Check each listing. NEXTACK and AKKTOL list stainless steel rivet support, as does WETOLS, though it advises against 4.8 mm steel and stainless rivets. WOBANK lists aluminum only, and the Meiwaltee listing says stainless steel rivets are not for use with its manual tool.
Your own selection is kept in the link, so friends see the same side-by-side.