
YF STORE die-set-hpYF STORE Hand Press All-in-One Snap/Rivet/Eyelet Set
Offers 13 die sets and a 2 to 15 mm die size range for rivets, snaps and eyelets.
- Die sets included
- 13
- Weight
- 5.2 lb
- Press type
- Hand press (clamp or bench)
A good rivet press sets rivets cleanly, comes with the dies you need, and covers the rivet and eyelet sizes in your projects. Die set count, rivet die sizes, snap and eyelet options, and whether a hole punch is included all affect the job. Some kits include fasteners, and many do not. We put 10 products on one spec sheet so you can compare dies, sizes and frame details side by side.
Quick answer
Ranked from 10 rivet press machines that met our standard, compared on press type, included die sets, die size range.
As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

Offers 13 die sets and a 2 to 15 mm die size range for rivets, snaps and eyelets.

Alloy frame and three eyelet die sizes, with fasteners and hole punches included.

Covers 9.5 mm, 10 mm, 12.5 mm and 15 mm snap buttons.
| Spec | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Best Scoreout of 100 | 81 | 78 | 71 | 68 | 62 | 60 | 58 | 50 | 44 | 44 |
| Press type | Hand press (clamp or bench) (best in row) | Hand press (clamp or bench) (best in row) | Hand press (clamp or bench) (best in row) | Hand press (clamp or bench) (best in row) | Compact hand press | Hand press (clamp or bench) (best in row) | Hand press (clamp or bench) (best in row) | Compact hand press | Hand press (clamp or bench) (best in row) | Hand press (clamp or bench) (best in row) |
| Frame material | — | High-density alloy | — | — | Stainless steel pillar | — | — | — | — | — |
| Weightlb | 5.2 lb | — | — | 4.5 lb | 16.0 lb (best in row) | 3.5 lb | — | 4.5 lb | 4.2 lb | 4.0 lb |
| Die sets included | 13 (best in row) | 3 | 10 | 7 | — | 6 | 7 | 8 | 5 | 4 |
| Rivet die sizes | 5 mm, 6 mm, 7 mm, 9 mm, 12 mm | — | 7 mm, 9 mm (single cap) | 6 mm (No. 0), 9 mm (No. 33.5) | — | 9 mm single cap, 9 mm double cap | Double cap 5, 6, 7, 8, 9, 10, 12 mm | 6mm and 7mm cap diameter | 5, 6, 7, 9, 12 mm double cap | 5 mm, 6 mm, 7 mm, 9 mm (double cap) |
| Snap button die sizes | 10 mm, 12.5 mm, 15 mm | — | 9.5 mm, 10 mm, 12.5 mm, 15 mm | 15 mm line 24 (831#), 9.5 mm prong | — | 9.5 mm prong, 12.5 mm spring, 15 mm utility spring | — | 12.5mm | — | — |
| Eyelet/grommet die sizes | 4.5 mm, 5.4 mm, 6 mm, 7.5 mm, 9 mm | 6mm (1/4in), 10mm (3/8in), 12mm (1/2in) | 5.4 mm, 7.5 mm, 9 mm | 6 mm (No. 4), 10 mm (No. 24), 12 mm (No. 28) | 6mm | No. 3 | — | 3.7mm and 5mm inner diameter | — | — |
| Sets snap buttons | Yes | — | Yes | Yes | — | Yes | — | Yes | — | — |
| Sets rivets | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Sets eyelets/grommets | Yes | Yes | Yes | Yes | Yes | Yes | — | Yes | — | — |
| Hole punch dies included | Yes (best in row) | Yes (best in row) | Yes (best in row) | Yes (best in row) | Yes (best in row) | No | No | Yes (best in row) | Yes (best in row) | — |
| Fasteners included | No | Yes (best in row) | No | No | Yes (best in row) | No | Yes (best in row) | No | No | No |
| Die size rangemm | 2–15 | 6–12 | 2–15 | 6–15 | 1.5–6 | 9–15 | 5–12 | 1.5–12.5 | 5–12 | 5–9 |
We reviewed 15 rivet press machines and kept only the 10 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.
These reviews are based on specifications and listing information only. They cover the five highest-ranked presses.
The widest die selection in this group
This YF STORE hand press ranks first on our list. It comes with 13 die sets, the most on the page. That covers three jobs in one box: rivets, snap buttons and eyelets. For a buyer who wants one press for mixed leather and fabric work, that range cuts down on extra purchases.
Rivet dies come in 5 mm, 6 mm, 7 mm, 9 mm and 12 mm double cap sizes. Snap dies cover 10 mm, 12.5 mm and 15 mm. Eyelet dies run 4.5 mm, 5.4 mm, 6 mm, 7.5 mm and 9 mm. The die size range is 2 to 15 mm, which ties for the top spot among the products listed.
Weight is 5.2 lb, and it works as a clamp or bench hand press. Hole punch dies of 2 mm and 4 mm are included. Rivets, snaps and eyelets are not, so plan to buy fasteners separately before you start.
VerdictA complete die kit that leads our ranking for mixed fastener work, as long as you bring your own fasteners.
Alloy frame and fasteners included, aimed at grommets
The DK98 ranks second. Its frame is high-density alloy, and the listing says a solid build replaced the older hollow iron design. A lower mold fixer is added to keep the upper and lower dies aligned. For setting grommets on canvas, banners or belts, that is the stated goal of the redesign.
It includes 3 die sets for eyelets and grommets in 6 mm (1/4 in), 10 mm (3/8 in) and 12 mm (1/2 in). The die size range is 6 to 12 mm. The maker doesn't publish separate rivet die sizes or snap die sizes, so check that your rivets fit before you buy.
Fasteners are included. The listing counts 1500 sets across the three sizes, 500 of each, with metal backs and plastic gaskets. Hole punches are included too. That makes it a ready-to-use grommet kit, though it has the fewest die sets among the models that list it.
VerdictA grommet-focused press that ranks second and suits canvas and banner work better than mixed fastener jobs, thanks to its included fasteners.
Ten die sets with single cap rivet dies
OREN's kit ranks third. It has 10 die sets, and its rivet dies are 7 mm and 9 mm in single cap style. Single cap is a different rivet type from double cap, so check which style your project uses before ordering fasteners. This is the main point to confirm.
Snap button dies come in four sizes: 9.5 mm, 10 mm, 12.5 mm and 15 mm. Eyelet dies are 5.4 mm, 7.5 mm and 9 mm. The die size range is 2 to 15 mm, which ties for the widest range listed.
Two hole punch dies, 2 mm and 4 mm, come with a brass base. Fasteners are not included, and the maker doesn't publish a weight. It suits a buyer who mainly sets snaps and wants a few eyelet sizes, with rivets as a secondary job.
VerdictA snap-friendly kit that ranks third, held back for rivet work by its two single cap rivet sizes and no included fasteners.
Seven die sets with coded sizes for grommets
This YF STORE set ranks fourth. It has 7 die sets and weighs 4.5 lb. Rivet dies are 6 mm (No. 0) and 9 mm (No. 33.5), both for double capped rivets. The listing adds that the 33.5 die can also set 8 mm rivets, which gives you a third size without extra dies.
Eyelet and grommet dies come in 6 mm (No. 4), 10 mm (No. 24) and 12 mm (No. 28). That gives you three grommet sizes for belts, bags and shoes. Snap dies cover a 15 mm line 24 (831#) fastener and a 9.5 mm prong type. The die size range runs from 6 to 15 mm.
Because the dies use numbered systems, match your rivets and snaps to those numbers before you order. A hole punch die is included, but fasteners are not. Plan to buy matching fasteners separately. It works as a clamp or bench hand press.
VerdictA mid-field kit that ranks fourth, useful for grommets and standard rivets but with fewer rivet sizes than the leader.
A leather punch press more than a rivet press
This hightall unit ranks fifth, and it is a different kind of tool. It is a compact hand press with a stainless steel pillar, built around punching holes and stitching slots in leather. The maker lists no rivet die sizes, so it is not a true rivet press in the sense most buyers mean.
At 16 lb, it is the heaviest press among the seven that list a weight. The kit has 9 round punches from 1.5 to 6 mm and 4 stitching prong punches. The listing says the pillar height adjusts for thick or thin leather and a spring recoils the handle after each punch.
Fasteners are included: 480 rivets in 3 sizes, plus a 6 mm grommet kit with 200 gold and 200 silver eyelets. The die size range is 1.5 to 6 mm, which has the lowest top size on the page. Buy it for leathercraft that mixes punching and light riveting, not for rivet dies.
VerdictUseful as a leather punching kit with fasteners, but it ranks fifth because it lacks the rivet dies this keyword calls for.
Best among the reviewed tools
Check the rivet, snap and eyelet die sizes against the fasteners you plan to use. A die only sets the size it was made for. Double cap and single cap rivets need different dies, so confirm the cap style before you order.
More die sets means more jobs from one press. The YF STORE all-in-one set has 13, the most listed. Some kits cover only rivets, with 4 or 5 dies. Decide whether you need snaps and eyelets before choosing a bigger kit.
Most of these kits ship dies and a press only. Rivets, snaps and eyelets are often sold separately. The W.vedo.M DK98, hightall and Yalando kits include fasteners. Several kits include hole punch dies, which saves buying a separate punch.
Press weight ranges from 3.5 lb to 16 lb among the models that list it. Five of the seven weigh between 4 lb and 5.2 lb. Most are clamp or bench hand presses, so plan a stable spot to mount one.
It depends on your projects. Rivet-only kits here have 4 to 7 die sets, which is enough for several rivet sizes. An all-in-one kit such as the YF STORE set with 13 adds snap and eyelet dies. Pick the count that matches the fasteners you use.
Usually not. Most kits here list fasteners as not included, so rivets, snaps and eyelets are bought separately. The W.vedo.M DK98, hightall and Yalando listings do include fasteners, so check the product details before you order.
Yes, if the kit has all three die types. The OREN set and four YF STORE kits list support for rivets, snaps and eyelets. The DZNTOOLS and Yalando kits are rivet-focused and do not list snap or eyelet support.
Match the die to the cap diameter of your rivets. Among the products listed, rivet dies run from 5 mm to 12 mm. The YF STORE all-in-one set and one DZNTOOLS kit cover 5 mm, 6 mm, 7 mm, 9 mm and 12 mm, while Yalando adds 8 mm and 10 mm.
Your own selection is kept in the link, so friends see the same side-by-side.