#1
HORUSDY 97394HORUSDY 40-Piece Recip Saw Blade Set
Ranks first, with 40 blades covering 3 to 24 TPI for wood and metal.
- Blades per pack
- 40
- Max cut capacity
- —
- Metal cutting
- Yes
Reciprocating Saw Blades · 54 compared side by side
Best Reciprocating Saw Blades in 2027
The right reciprocating saw blade depends on what you cut and how your saw holds the blade. Tooth count sets the speed and finish. Low TPI cuts wood fast. High TPI suits metal. Length decides how deep you can go. Blade material affects how long the edge lasts. We put 54 products on one spec sheet so you can compare TPI range, length, pack size, and cut capacity in one place.
Quick answer
- Best overall: HORUSDY 97394 (#1, Best Score 77; blades per pack 40 )
- Long blade, 300 mm cut: EZARC 802060 (#2, Best Score 72; blades per pack 3 , max cut capacity 300 mm)
- Pruning blade with U-groove: EZARC 802067 (#3, Best Score 71; blades per pack 3 , max cut capacity 300 mm)
Ranked from 54 reciprocating saw blades that met our standard, compared on wood_cutting and metal_cutting capability, blade_length, and tpi_max.
As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.
Top picks
#2
EZARC 802060EZARC Arc Edge Pruning Reciprocating Saw Blade
Lists a 14.57 in blade and 300 mm max cut capacity for wood pruning.
- Blades per pack
- 3
- Max cut capacity
- 300 mm
- Metal cutting
- —
#3
EZARC 802067EZARC U-Groove Arc Edge Pruning Reciprocating Saw Blade
Pairs a 15 in blade with chip removal design and a 2-year warranty.
- Blades per pack
- 3
- Max cut capacity
- 300 mm
- Metal cutting
- —
Comparison table
Swipe or scroll sideways to see every model.| Spec | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Best Scoreout of 100 | 77 | 72 | 71 | 70 | 65 | 64 | 63 | 62 | 62 | 62 |
| Blade lengthin | — | 15 in | 15 in | — | — | 15 in | — | — | — | 15 in |
| Max teeth per inchTPI | 24 TPI | 6 TPI | 6 TPI | 24 TPI | 18 TPI | 6 TPI | 24 TPI | — | — | 6 TPI |
| Min teeth per inchTPI | 3 TPI | 6 TPI | 6 TPI | 3 TPI | 6 TPI | 6 TPI | 3 TPI | — | — | 6 TPI |
| Blades per pack | 40 (best in row) | 3 | 3 | 32 | 10 | 4 | 34 | 12 | 10 | 5 |
| Blade material | Cr-V and bi-metal | — | — | Cr-V steel, bi-metal | Cr-V steel (wood); bi-material (metal) | Chromium-Vanadium (CRV) steel | 58CRV wood blades; M2+6150 bimetal metal blades | Bi-metal | Bimetal | — |
| Max cut capacitymm | — | 300 mm (best in row) | 300 mm (best in row) | 175 mm | — | 300 mm (best in row) | — | — | — | — |
| Wood cutting | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Metal cutting | Yes | — | — | Yes | Yes | — | Yes | Yes | Yes | — |
| Chip removal design | — | — | Yes | — | — | Yes | — | Yes | — | Yes |
| Storage case included | — | — | — | Yes | Yes | — | Yes | Yes | Yes | — |
| Set weightlb | 0.00 lb (best in row) | 0.51 lb | — | 1.34 lb | 0.39 lb | 0.73 lb | 0.02 lb | 1.00 lb | 0.87 lb | 0.97 lb |
| Warrantyyears | — | — | 2 years | — | — | — | — | — | — | — |
Best in row— not published by the maker yet
How we chose
We reviewed 81 reciprocating saw blades and kept only the 54 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.
- 4.0★ or higherAverage customer rating
- Proven demand25+ reviews or an Amazon sales rank
- In stockAvailable to order when checked
- 50%+ specs knownEnough data to compare fairly
In-depth reviews
These reviews are based on specifications and listing information, not hands-on use. They cover the five top-ranked blade sets and packs.
Best overall
HORUSDY 97394HORUSDY 40-Piece Recip Saw Blade Set
A 40-blade kit that covers wood and metal
- Max cut capacity
- —
- Blades per pack
- 40 (best of the reviewed tools)
- Metal cutting
- Yes (best of the reviewed tools)
- Chip removal design
- —
The HORUSDY 97394 ranks first on our Best Score at 77. It holds 40 blades in one set. TPI runs from 3 to 24, so you get coarse blades for fast wood cuts and fine blades for thinner material.
The blades use Cr-V and bi-metal construction. The listing says the set includes 4, 6, and 9 in lengths. It lists wood, wet lumber, metal, and PVC as target materials. Both wood and metal cutting are marked as supported in the data.
A rugged organizer pouch is part of the set. The maker does not publish a max cut capacity or warranty. Set weight is listed at 0.000625 lb, the lowest on the page, though that figure looks very small for 40 blades. Check the weight before relying on it.
Pros
- 40 blades in one set
- 3 to 24 TPI range
- Cuts wood and metal
Cons
- No cut capacity published
- No warranty listed
- Buy it if
- you want one kit for wood, metal, and PVC.
- Skip it if
- you only prune thick branches.
VerdictIt is the broadest all-round kit in this group and earns its top rank.
Long blade, 300 mm cut
EZARC 802060EZARC Arc Edge Pruning Reciprocating Saw Blade
A long, coarse blade built for pruning
- Max cut capacity
- 300 mm (best of the reviewed tools)
- Blades per pack
- 3
- Metal cutting
- —
- Chip removal design
- —
The EZARC 802060 is a three-pack of pruning blades. Blade length is 14.57 in. The listing gives 370 mm overall and 320 mm working length. TPI is a fixed 6, which is coarse and suits green and wet wood.
Max cut capacity is 300 mm, tied for the highest on the page. The listing describes an arc edge and triple-ground offset teeth. Those give three cutting angles and cut friction in larger limbs.
This is a wood-only blade. Metal cutting is not listed. The shank fits most major brands, but the listing says it does not fit Ryobi saws. Set weight is 0.51 lb. It ranks second with a Best Score of 72. No warranty is published.
Pros
- 300 mm max cut capacity
- Long 14.57 in blade
- Coarse 6 TPI for green wood
Cons
- Wood only
- Not compatible with Ryobi
- Buy it if
- you trim trees and limbs with a recip saw.
- Skip it if
- you own a Ryobi saw or cut metal.
VerdictA focused pruning pack that gives you reach and capacity for limb work.
Pruning blade with U-groove
EZARC 802067EZARC U-Groove Arc Edge Pruning Reciprocating Saw Blade
U-groove design aims to clear wet wood chips
- Max cut capacity
- 300 mm (best of the reviewed tools)
- Blades per pack
- 3
- Metal cutting
- —
- Chip removal design
- Yes
The EZARC 802067 is a 15 in, 6 TPI pruning blade sold in a three-pack. It reaches the 300 mm max cut capacity. That puts it among the longest blades on the page.
Its main difference is the U-groove. The listing says it improves chip evacuation and lowers heat and binding in wet wood. The data marks chip removal design as present. The teeth are fleam ground with deep gullets.
It is one of only four products on the page that list a warranty, and its 2 years ties for the highest. It is wood only, with no metal cutting listed. The listing notes it does not fit Ryobi saws. It ranks third at 71.
Pros
- 2-year warranty
- U-groove chip removal
- 300 mm cut capacity
Cons
- No metal cutting
- Not for Ryobi saws
- Buy it if
- you cut wet, resinous wood often.
- Skip it if
- you need blades for metal.
VerdictThe warranty and chip design make it a stronger pick than its sibling for wet wood.
Wood and metal with case
WORKPRO W000501AWORKPRO Wood & Metal Recip Blade Set (32-pc)
A 32-piece set with a clear wood and metal split
- Max cut capacity
- 175 mm
- Blades per pack
- 32
- Metal cutting
- Yes (best of the reviewed tools)
- Chip removal design
- —
The WORKPRO W000501A packs 32 blades with TPI from 3 to 24. The listing breaks it down by use. Wood blades are Cr-V steel at 3 to 8 TPI in 6 and 9 in lengths. Metal blades are bi-metal at 14 to 24 TPI.
Max cut capacity is 175 mm. The listing says metal from 0.7 to 8 mm thick and pipes from 5 to 100 mm are in range. It adds a pruning blade for branches up to 180 mm. The wood blades are not for wood with nails.
A storage organizer is included. Set weight is 1.34 lb. It ranks fourth with a Best Score of 70. The maker does not publish a warranty.
Pros
- Clear wood and metal blade split
- Organizer included
- Pipe and thin metal range
Cons
- Wood blades avoid nails
- No warranty published
- Buy it if
- you want published thickness limits for metal.
- Skip it if
- you cut nail-embedded wood.
VerdictA well-documented kit for mixed home projects with a clear guide to each blade.
Compact mixed-material kit
SEDY 86501SEDY 10-Piece Wood and Metal Reciprocating Saw Blade Set
A small set for basic wood and metal jobs
- Max cut capacity
- —
- Blades per pack
- 10
- Metal cutting
- Yes (best of the reviewed tools)
- Chip removal design
- —
The SEDY 86501 holds 10 blades. TPI runs from 6 to 18. The listing says it has four 6 in 6 TPI wood blades, two 8 in 6 TPI wood blades, two 6 in 18 TPI metal blades, and two 6 in 10-14 TPI blades for wood and soft metal.
Wood blades are Cr-V steel. Metal blades are bi-material. Both wood and metal cutting are listed. A storage box comes with the set. Set weight is 0.39 lb, light enough for a toolbox.
The set has no blade under 6 TPI, so it lacks the very coarse teeth of the larger kits. Max cut capacity and warranty are not published. It ranks fifth with a Best Score of 65.
Pros
- Wood and metal included
- Storage box included
- Light at 0.39 lb
Cons
- Only 10 blades
- No tooth count below 6
- Buy it if
- you do light DIY and want a small kit.
- Skip it if
- you need very coarse demolition blades.
VerdictA compact starter kit that covers common jobs without the bulk of larger sets.
Best among the reviewed tools
Buying guide
Match TPI to your material
Low TPI, such as 3 to 6, cuts wood fast and clears chips. Mid to high TPI, such as 14 to 24, suits thin metal and pipe. A set that spans both ranges handles mixed work.
Pick the right blade length
Longer blades reach deeper into thick stock and branches. This page runs from 6 in to 15 in. Short blades are stiffer for metal. Check that the length fits your project's depth.
Check material and shank fit
Bi-metal blades hold an edge in metal. Cr-V steel suits wood. Most listings say they fit major brands, but some EZARC blades do not fit Ryobi saws. Confirm compatibility before you buy.
Look at pack size and storage
Big sets give variety but cost storage space. A case or pouch keeps blades sorted. Packs of 3 to 5 pruning blades make sense for one task, while 30 or more pieces suit mixed work.
FAQ
What TPI is best for cutting wood?
Lower TPI, around 3 to 8, cuts wood faster because the teeth are larger and clear chips. Pruning blades on this page use 6 TPI. Higher TPI gives a smoother finish but cuts slower.
Can one blade cut both wood and metal?
Some can. The ALEXEX 4/6 TPI bi-metal blades and DEWALT DW4802-2 list both wood and metal cutting. Sets like the HORUSDY and WORKPRO include separate blades for each material.
Will these blades fit my reciprocating saw?
Most listings say they fit major brands with a universal shank. The EZARC pruning blades state they do not fit Ryobi saws. Check your saw brand against each listing before buying.
How long a blade do I need for pruning?
For limbs, long blades help. Several pruning blades here are 15 in, and the EZARC and GRENPRO models list a 300 mm max cut capacity. Pick a length that clears the branch diameter.
Related comparisons
Share this comparison
Your own selection is kept in the link, so friends see the same side-by-side.