
HURRICANE 02-003HURRICANE 3-Piece Aviation Tin Snips Set
Three snips cover straight, left and right cuts with a latch and rust-resistant finish.
- Max gauge, mild steel
- 20 ga
- Max gauge, stainless
- 22 ga
- Pieces in set
- 3 pcs
Snips cut thin sheet metal and aluminum, not thick bar, rod or hardened steel. Before you pick one, check the gauge rating, the cut direction and the handle. A lower gauge number means thicker metal. Straight snips suit long lines, while left and right snips handle curves. A hacksaw is the better hand tool for thick stock. We put 27 products on one spec sheet so you can compare capacity, weight, blade steel and safety features side by side.
Quick answer
Ranked from 27 snips that met our standard, compared on Max gauge for mild steel and stainless, blade type and cut style, weight and length.
As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

Three snips cover straight, left and right cuts with a latch and rust-resistant finish.

Lists 18 ga mild steel capacity across straight, left and right snips.

Straight cuts only, with 18 ga mild steel capacity and a rust-resistant finish.
| Spec | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Best Scoreout of 100 | 86 | 80 | 69 | 66 | 65 | 64 | 64 | 62 | 62 | 61 |
| Pieces in setpcs | 3 pcs (best in row) | 3 pcs (best in row) | — | — | 3 pcs (best in row) | 2 pcs | 3 pcs (best in row) | 1 pcs | 2 pcs | 1 pcs |
| Cut direction | Straight, Left & Right (best in row) | Straight, Left & Right (best in row) | Straight | Straight | Straight, Left & Right (best in row) | Left & Right | Straight, Left & Right (best in row) | Straight | Left & Right | Straight |
| Lengthin | 10.0 in | 10.2 in (best in row) | 10.0 in | 10.0 in | — | 10.0 in | 10.0 in | 10.1 in | 10.2 in | 8.0 in |
| Weightlb | 1.00 lb | 2.40 lb | — | — | — | 1.96 lb | — | 0.90 lb (best in row) | 0.91 lb | — |
| Max gauge, mild steelga | 20 ga | 18 ga (best in row) | 18 ga (best in row) | 18 ga (best in row) | 18 ga (best in row) | 18 ga (best in row) | 18 ga (best in row) | 18 ga (best in row) | — | 18 ga (best in row) |
| Max gauge, stainlessga | 22 ga | 22 ga | 22 ga | 22 ga | 22 ga | — | 22 ga | 22 ga | 22 ga | 22 ga |
| Blade material | Cr-V (Chrome Vanadium) steel | Chrome vanadium steel | Chrome vanadium (CR-V) steel | Chrome vanadium steel (Cr-V) | Chrome-molybdenum alloy steel | Molybdenum alloy steel | Chrome vanadium steel (CR-V) | Forged heat-treated steel | Forged, heat-treated steel | Cr-V steel |
| Serrated blades | Yes | Yes | Yes | Yes | Yes | — | — | Yes | — | Yes |
| Safety latch | Yes | Yes | Yes | Yes | Yes | — | Yes | — | Yes | Yes |
| Rust-resistant coating | Yes | — | Yes | — | — | Yes | — | — | — | — |
| Made in USA | — | — | — | — | — | Yes | — | — | — | — |
| Warranty | — | 1 year | — | — | — | — | — | — | — | — |
We reviewed 39 snips and kept only the 27 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.
These reviews are based on specifications and listing information only. We compare each maker's published numbers and claims and explain what they mean for cutting metal by hand.
Three-snip set covers straight and curved sheet cuts
This set leads our ranking. It includes three snips: yellow for straight cuts, red for left curves, green for right curves. That covers most sheet metal and aluminum layouts without twisting your wrist or forcing a curve with the wrong tool. The data lists a 10 in length and a weight of 1 lb, a manageable size for repeated cuts.
Capacity is the limit to check. The maker lists 20 ga in mild steel and 22 ga in stainless. That is thinner than the 18 ga rating on several rivals, so heavier mild steel is better handled by another model. The blades are Cr-V steel with serrations that grip the sheet and reduce slipping. The listing says to avoid hardened steel, rods and wire mesh.
Comfort features include a rubber TyreGrip handle, a self-opening spring and a manual safety latch for storage. A rust-resistant finish is listed. For thicker metal, a hacksaw is the usual tool, since these snips are meant for thin sheet.
VerdictA well-rounded set for thin sheet metal and aluminum, but not for thicker steel.
Thicker 18 ga steel capacity in a three-snip set
Ranking second, this set also covers straight, left and right cuts with three snips. The difference is capacity. It lists 18 ga in cold-rolled steel, which is thicker than the 20 ga limit on the first-ranked set, and 22 ga in stainless. For buyers cutting heavier sheet, that extra thickness matters.
Weight is the trade-off. The data lists 2.4 lb and a length of 10.23 in. A heavier tool can feel tiring over a long run of cuts, though the listing describes a high-leverage design meant to ease the work. The handles are two-colored with a rubberized grip, and a latch keeps the blades closed in storage with one-handed release.
Blades are chrome vanadium steel with serrated edges, heat treated with a high-frequency process per the listing. Amazon Basics backs the set with a one-year warranty. That is the shortest warranty term among the models that list one. No rust coating is listed, so wipe the blades dry after use.
VerdictA capable three-snip set for heavier sheet, with weight as the main drawback.
Straight-cut snip for sheet metal and duct work
This is a straight-cut snip, so it fits the keyword only for straight lines in sheet metal and aluminum. Tight curves are outside its job. That makes it a narrower tool than the three-snip sets above it. The listing mentions HVAC, gutter and duct work, plus copper sheet and light-gauge steel. The tool is 10 in long.
Capacity is listed at 18 ga in mild steel and 22 ga in stainless. Fine serrations on the Cr-V blades grip the sheet, which helps keep it from slipping mid-cut. The listing also describes a bulldog-style nose that concentrates leverage at the tip. The maker doesn't publish the weight, so how heavy it feels is unknown.
A textured rubberized handle is meant to stay secure with work gloves. A spring-assisted latch locks the blades closed in storage, and the finish is described as rust-resistant. The listing says it is a hacksaw alternative for light metal trimming, but thick stock still calls for a saw. A built-in hang hole helps with storage.
VerdictA focused straight cutter that handles thin sheet well but cannot turn tight curves.
Straight 10 in snip with a hardness rating listed
Ranked fourth, this is another straight-cut 10 in snip. The listing says it also handles gentle curves, but it is not a left or right cut set. Materials named include sheet metal, copper, aluminum, chicken wire and hardware cloth. Tight turns will need a different tool. That suits long straight runs.
Capacity matches most of the lineup: 18 ga in mild steel and 22 ga in stainless. The blades are Cr-V steel, and the listing gives a hardness of 58-62HRC. Serrated edges grip the material to keep cuts steady. The maker does not list a weight or a rust-resistant coating, so storage in a dry spot is sensible.
Tyregrip rubberized handles have a contoured, textured design and are said to give a secure hold with work gloves. A locking latch protects the blades in storage, and the spring-assisted action allows one-handed use. Gloves are not included. Use it on thin sheet, aluminum and copper, and leave heavy steel to a saw.
VerdictA solid straight cutter for thin sheet, held back by missing specs and no curve blades.
Three-snip Midwest set with hard serrated blades
This Midwest set ranks fifth and includes three snips for straight, left and right cuts. That mix covers left curves, right curves and long straight lines. The listing points to sheet metal, HVAC work, roofing and general metalworking. The maker does not publish a length or weight, so check handle size before buying for long jobs.
The blades are drop-forged chrome-molybdenum alloy steel with induction-hardened serrated edges rated 60–62 HRC. Its alloy differs from the Cr-V steel in the first four models. Capacity is 18 ga in cold-rolled steel and 22 ga in stainless, the same as several others in the lineup. Serrations grip the sheet to reduce slipping, which matters on slick aluminum.
Handles are non-slip comfort grips with double-overwind springs. A one-hand safety auto latch keeps the blades closed in storage. No rust-resistant coating is listed. Left and right snips are separate tools, so you switch by hand. Midwest describes the ToughCut line as dependable everyday cutting.
VerdictA capable three-snip set with strong blade specs, but several details are missing.
Best among the reviewed tools
Gauge tells you the thickest metal a snip can cut. A lower number means thicker steel. Most snips here list 18 ga for mild steel and 22 ga for stainless. The first-ranked set lists 20 ga mild steel. Match the rating to your sheet, and do not push past it.
Straight snips cut straight lines and wide curves. Left and right snips turn tight curves in their own direction. Offset snips keep your hand above the material. If your project has curves, a set with all three cut types saves you from forcing a cut.
Snips shear thin sheet. For rod, bar, pipe or hardened steel, a hacksaw is the better hand tool. One listing warns against hardened steel, rods and wire mesh. Choose snips for sheet and a hacksaw for solid stock.
Weight and length affect fatigue on long runs. Rubberized grips help with gloves. A safety latch keeps blades closed in storage. A rust-resistant coating helps if you store tools in a garage. Specs vary, so note which of these a maker does not publish.
Yes, for thin sheet. Several listings name aluminum among the materials their snips cut, including the first-ranked set and the wikmonx model. Check the gauge rating on the product, and use a hacksaw for thick aluminum bar or plate.
It is the thickest mild steel the maker says the snips can cut. Gauge runs backward, so 18 ga is thicker than 20 ga or 22 ga. Most snips on this page list 18 ga for mild steel and 22 ga for stainless.
For thin sheet metal, snips are the tool these listings are built around. They cut sheet in one pass. A hacksaw suits rod, bar and thicker stock. Pick by thickness: if it exceeds the snip's gauge rating, use the saw.
Left and right snips cut tight curves in their own direction. The first-ranked HURRICANE set and the Amazon Basics set include both, plus a straight snip. Straight-only models like the wikmonx suit long lines better than tight turns.
Your own selection is kept in the link, so friends see the same side-by-side.