Face Shields · 7 compared side by side

Best Face Shields in 2027

A good face shield starts with impact certification. Look for ANSI Z87.1, then check what else it does for your task. Anti-fog coating keeps your view clear during grinding or cutting. Chin and side guards matter for splashes and debris. A shield that fits over glasses saves you from swapping eyewear. Weight matters on long shifts. We put 7 products on one spec sheet so you can compare standards, coatings, coverage, and weight side by side. Missing specs are marked as not published.

Quick answer

  • Best overall: NOCRY UltraShield Pro Mask (#1, Best Score 83; ansi z87.1 certified Yes)
  • Spare visor included: Blue Eagle B1BL+FC48 (#2, Best Score 74; ansi z87.1 certified Yes, headgear adjustment Ratchet dial)
  • Coated shield for glasses: NOCRY FaceArmor Pro (#3, Best Score 73; ansi z87.1 certified Yes, headgear adjustment Ratchet dial)

Ranked from 7 face shields that met our standard, compared on ANSI Z87 certification, anti-fog coating, and coverage style.

Updated November 202618 reviewed · 7 met our standard13 specs comparedBy Comparabo editors

As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

Top picks

Best overall
#1
NOCRY UltraShield Pro Mask

NOCRY UltraShield Pro MaskNoCry UltraShield Pro Goggle and Shield

Certified goggle and shield combo with anti-fog and anti-scratch coatings.

ANSI Z87.1 certified
Yes
Headgear adjustment
—
Weight
—
Check price on Amazon
Spare visor included
#2
Blue Eagle B1BL+FC48

Blue Eagle B1BL+FC48Blue Eagle Clear Full Face Shield

Lists five standards and comes with one extra visor at 0.66 lb.

ANSI Z87.1 certified
Yes
Headgear adjustment
Ratchet dial
Weight
0.66 lb
Check price on Amazon
Coated shield for glasses
#3
NOCRY FaceArmor Pro

NOCRY FaceArmor ProNOCRY FaceArmor Pro Face Shield

Anti-fog and anti-scratch coatings, a ratchet dial, and a weight of 0.67 lb.

ANSI Z87.1 certified
Yes
Headgear adjustment
Ratchet dial
Weight
0.67 lb
Check price on Amazon

Comparison table

Swipe or scroll sideways to see every model.
Top 7 face shields
Spec
#1
NOCRY UltraShield Pro Mask
Best overallCheck price on Amazon
#2
Blue Eagle B1BL+FC48
Spare visor includedCheck price on Amazon
#3
NOCRY FaceArmor Pro
Coated shield for glassesCheck price on Amazon
#4
Jackson 14201
Chin and side guardsCheck price on Amazon
#5
ARCCAPTAIN
Wraparound visor, both coatingsCheck price on Amazon
#6
Honeywell S8500
Highly adjustable visor tiltCheck price on Amazon
#7
Sellstrom S30110
Lightest at 0.65 lbCheck price on Amazon
Best Scoreout of 10083747366625744
ANSI Z87.1 certifiedYesYesYesYesYesYesYes
Other standardsOSHA-approvedCE EN166, CSA Z94.3, UKCA, AS/NZS 1337.1—CSA Z94.3—CSA Z94.3CSA Z94.3
Anti-fog coatingYes (best in row)—Yes (best in row)Yes (best in row)Yes (best in row)—No
Anti-scratch coatingYes (best in row)—Yes (best in row)NoYes (best in row)Yes (best in row)No
Visor materialPolycarbonatePolycarbonatePolycarbonatePolycarbonatePolycarbonatePolycarbonatePolycarbonate
Coverage styleGoggle and shield combo——Full face with chin and side guards (best in row)Full face wraparound—Full face wraparound
Headgear adjustment—Ratchet dialRatchet dialRatchet dialRatchet dialRatchet dialRatchet dial
Visor tilt positions—————2784 —
Fits over glassesYes—YesYes———
Replaceable visor—Yes—Yes—Yes—
Extra visors included—1 —————
Weightlb—0.66 lb0.67 lb1.75 lb1.43 lb1.30 lb0.65 lb (best in row)
WarrantyyearsLifetime*—Lifetime*————
Best in row— not published by the maker yet

How we chose

We reviewed 18 face shields and kept only the 7 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.

Read the full method

In-depth reviews

These reviews are based on specifications and listing information only. They cover the five top-ranked products.

Best overall

NOCRY UltraShield Pro MaskNoCry UltraShield Pro Goggle and Shield

Goggles plus shield for dust, splash and debris

ANSI Z87.1 certified
Yes (best of the reviewed tools)
Anti-fog coating
Yes (best of the reviewed tools)
Weight
—
Warranty
Lifetime* (best of the reviewed tools)

This is a goggle and shield combo, not a standalone face shield. That matters for the keyword. You get sealed eye protection with a polycarbonate shield in front of it. It leads our ranking because it lists ANSI Z87.1 certification, anti-fog coating, anti-scratch coating, and a fit over glasses together.

The listing says angled vents move air to fight fog, and the goggles have a soft TPR seal with an adjustable strap. The listing also mentions UV protection. OSHA-approved is the other standard named. The maker does not publish a weight, so you cannot compare how heavy it feels against the others. Visor tilt positions are not listed either.

Pick this for dust, splash, and debris work where sealed eyes matter more than full face coverage. The listing does not describe chin or side coverage, so check that before you buy for heavy work. Glasses wearers get the most from the wide panoramic lens listed in its features. The warranty is listed at 99 years.

Pros

  • ANSI Z87.1 certified
  • Anti-fog and anti-scratch coatings
  • Fits over glasses

Cons

  • Not a true full face shield
  • Weight not published
Buy it if
you want sealed eyes plus a shield.
Skip it if
you need chin and side coverage.

VerdictA strong certified combo for dust and splash, but it is goggles first and a shield second.

Spare visor included

Blue Eagle B1BL+FC48Blue Eagle Clear Full Face Shield

Wide standards list and a spare visor at 0.66 lb

ANSI Z87.1 certified
Yes (best of the reviewed tools)
Anti-fog coating
—
Weight
0.66 lb (best of the reviewed tools)
Warranty
—

Blue Eagle ranks second on our spec sheet, mostly on certification and weight. It lists ANSI Z87.1 along with CE EN166, CSA Z94.3, UKCA, and AS/NZS 1337.1. If your site or employer asks for a specific standard, this list gives you several ways to match it. Standards matter because they set the impact test the visor must pass.

The listing says the polycarbonate visor handles a 6 mm steel bead at 268 MPH between -23°F and +122°F. At room temperature it cites a 300 MPH, 6 mm steel ball. An aluminum edge adds strength and lets you shape the curve. Weight is 0.66 lb, which is light among the models that list it.

The ratchet dial adjusts fit, the visor is replaceable, and one extra visor is included. Anti-fog and anti-scratch coatings are not listed, so fogging control is up to you. Glasses fit is not stated. The maker does not publish coverage style or tilt positions.

Pros

  • Five standards listed
  • Spare visor included
  • Light at 0.66 lb

Cons

  • No anti-fog coating listed
  • Coverage style not published
Buy it if
you want a spare visor and several standards.
Skip it if
you work in humid, fog-prone spaces.

VerdictA light, well-certified shield with a spare visor, but you must manage fog yourself.

Coated shield for glasses

NOCRY FaceArmor ProNOCRY FaceArmor Pro Face Shield

Coated, light, and made to sit over glasses

ANSI Z87.1 certified
Yes (best of the reviewed tools)
Anti-fog coating
Yes (best of the reviewed tools)
Weight
0.67 lb
Warranty
Lifetime* (best of the reviewed tools)

Third place comes from a short list of useful features. The polycarbonate visor is ANSI Z87.1 certified and carries both anti-fog and anti-scratch coatings. Fog control keeps your view clear when you breathe hard under a grinder. Scratch resistance helps the visor stay clear over repeated use.

Weight is 0.67 lb, close to the lightest listed. The ratchet dial sets the fit, and the listing describes four visor angle positions and a pin lock. It also says the curved visor goes over prescription glasses. Three extra sweatbands come in the box, which helps on long, hot shifts.

The data does not show a replaceable visor, a spare visor, or a coverage style. If the visor gets damaged, you may need a whole new unit. Coverage beyond the curved front is not described. Its listing also names woodworking, pesticide spraying, and yard work as intended uses. The warranty is listed at 99 years.

Pros

  • Anti-fog and anti-scratch coatings
  • Fits over glasses
  • Light at 0.67 lb

Cons

  • Visor not listed as replaceable
  • No coverage style published
Buy it if
you wear glasses and do grinding or woodworking.
Skip it if
you want a spare visor in the box.

VerdictA light, coated shield that suits glasses wearers, with no spare visor to fall back on.

Chin and side guards

Jackson 14201Jackson Safety Maxview Face Shield

Full coverage with chin and side guards

ANSI Z87.1 certified
Yes (best of the reviewed tools)
Anti-fog coating
Yes (best of the reviewed tools)
Weight
1.75 lb
Warranty
—

Jackson's Maxview lists full face coverage with chin and side guards. The listing adds an oversized window and an extended crown for overhead hazards. For splashes or debris coming from the side, that coverage matters more than a bare front visor. Guards close the gaps a front-only visor leaves.

It is ANSI Z87.1 certified and meets CSA Z94.3. The polycarbonate window has an anti-fog coating and can be replaced. The crown is ABS plastic. Anti-scratch is listed as no, so plan to swap a worn window. A ratchet dial with an oversized knob adjusts even with gloves on, and the listing says it fits with respirators and most goggles.

The cost is weight. At 1.75 lb it is the heaviest among the models that list a weight, so long overhead jobs may tire your neck. Blue Eagle weighs 0.66 lb, though it does not list chin or side guards. Jackson does not publish a warranty length or tilt positions.

Pros

  • Chin and side guards
  • Anti-fog coating
  • Fits with respirators and goggles

Cons

  • Heaviest at 1.75 lb
  • No anti-scratch coating
Buy it if
you need chin and side guards.
Skip it if
you need a light shield for long wear.

VerdictStrong coverage and fit with respirators, paid for with the highest weight on the page.

Wraparound visor, both coatings

ARCCAPTAIN ARCCAPTAIN Anti-Fog Face Shield

Wraparound visor with both coatings, but heavier

ANSI Z87.1 certified
Yes (best of the reviewed tools)
Anti-fog coating
Yes (best of the reviewed tools)
Weight
1.43 lb
Warranty
—

ARCCAPTAIN ranks fifth, but it still lists a full face wraparound visor in polycarbonate, ANSI Z87.1 certification, and both anti-fog and anti-scratch coatings. The listing says the anti-fog layer is meant for heavy grinding and humid air. Those features suit sparks, dust, and flying debris, the hazards the listing names. The listing also mentions UV blocking.

Weight is 1.43 lb, the second highest among the models that list it, so it is not a light pick for long shifts. The ratchet dial sets the fit, and the listing mentions a sweat-absorbing headband and multi-angle tilt. The maker does not publish a tilt position count.

Several details are missing. The data does not say whether the visor can be replaced, whether a spare comes in the box, or whether it fits over glasses. It also lists no other standard or warranty. Check those points if you wear glasses or expect hard use.

Pros

  • Full face wraparound visor
  • Anti-fog and anti-scratch coatings
  • ANSI Z87.1 certified

Cons

  • Heavy at 1.43 lb
  • Glasses fit not listed
Buy it if
you want coatings and wraparound coverage.
Skip it if
you need a replaceable or spare visor.

VerdictGood coating and coverage on paper, with weight and missing details holding it back for some buyers.

Best among the reviewed tools

Buying guide

Check the impact rating first

Look for ANSI Z87.1 on the product data. It is the US standard for impact protection. Some shields also list CSA Z94.3, CE EN166, or UKCA, which matter if your employer or region asks for them. A face shield with no listed standard is a poor choice for grinding or cutting.

Match coverage to the hazard

Chin and side guards help against splashes and debris from the sides. A bare visor covers less. Goggle combos seal the eyes but may cover less of the face. Check the coverage style in the spec sheet, and note that some makers do not publish it.

Look for fog and scratch control

Anti-fog coating cuts condensation when you breathe behind the visor. Anti-scratch coating keeps the surface readable over time. Three models here list both coatings, while a replaceable visor lets you swap a worn one instead of buying a new shield.

Weigh comfort and fit

Weight ranges from 0.65 lb to 1.75 lb among the models that list it. Lighter shields ease neck strain on long jobs. If you wear glasses or a respirator, check the fit notes, and look for a ratchet dial to adjust the headband.

FAQ

Does a face shield replace safety glasses?

Not always. Jackson says its Maxview is designed to be worn with safety glasses. A face shield guards the face, while glasses or goggles protect the eyes up close. Check your task rules and the standards listed on the shield before you drop eye protection.

Which face shield has anti-fog coating?

NoCry UltraShield Pro, NoCry FaceArmor Pro, Jackson Maxview, and ARCCAPTAIN list an anti-fog coating. Sellstrom is listed as having none. Blue Eagle and Honeywell S8500 do not list one, though Honeywell's listing mentions anti-fog replacement visor options.

Can I wear a face shield over glasses?

Some models say yes. NoCry UltraShield Pro, NoCry FaceArmor Pro, and Jackson Maxview list a fit over glasses. Blue Eagle, ARCCAPTAIN, Honeywell, and Sellstrom do not state it, so check the maker's guidance before you buy.

How heavy is a face shield?

Among the models that list weight, Sellstrom is lightest at 0.65 lb and Jackson Maxview is heaviest at 1.75 lb. Blue Eagle lists 0.66 lb and NoCry FaceArmor Pro lists 0.67 lb. NoCry UltraShield Pro does not publish a weight.

Related comparisons

Share this comparison

Your own selection is kept in the link, so friends see the same side-by-side.

Helpful guides

Top pick · #1NOCRY UltraShield Pro Mask
Check price on Amazon