Catalytic Converters · 12 compared side by side

Best Motorcycle Emission Systems in 2027

A motorcycle owner needs two answers first: is the part legal for the bike, and does it fit the pipe? Check the emissions standard, then whether the unit is direct-fit or a universal weld-on. After that, compare inlet size, length and O2 sensor ports. One caution: every product here is listed for cars or as a universal part, and none names a motorcycle. We put 12 products on one spec sheet so you can compare the numbers, but confirm fit with the maker before you buy.

Quick answer

  • Best overall: SPEEDFusion YL12337G (#1, Best Score 90; emissions compliance EPA federal, converter type Direct-fit)
  • Most O2 sensor ports: PHILTOP 2002-2006 Honda CR-V (#2, Best Score 74; emissions compliance EPA federal, converter type Direct-fit)
  • Compact direct-fit body: A-Premium APCCT212 (#3, Best Score 69; emissions compliance EPA federal, converter type Direct-fit)

Ranked from 12 catalytic converters that met our standard, compared on emissions standard (CARB or EPA legality), converter type (direct-fit vs. universal), body material.

Updated November 202629 reviewed · 12 met our standard13 specs comparedBy Comparabo editors

As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

Top picks

Best overall
#1
SPEEDFusion YL12337G

SPEEDFusion YL12337GSPEEDFusion Front 2-PC Catalytic Converter

Direct-fit, EPA federal and a 5-year warranty, but listed only for Nissan and Infiniti cars.

Emissions compliance
EPA federal
Converter type
Direct-fit
Warranty
5 years
Check price on Amazon
Most O2 sensor ports
#2
PHILTOP 2002-2006 Honda CR-V

PHILTOP 2002-2006 Honda CR-VPHILTOP High Flow Catalytic Converter Honda CR-V

Two ports and 29.07 in of length, listed only for the 2.4L Honda CR-V.

Emissions compliance
EPA federal
Converter type
Direct-fit
Warranty
1 year
Check price on Amazon
Compact direct-fit body
#3
A-Premium APCCT212

A-Premium APCCT212A-Premium Front Catalytic Converter

At 14.96 in long with one O2 port, it fits listed Hyundai and Kia models.

Emissions compliance
EPA federal
Converter type
Direct-fit
Warranty
1 year
Check price on Amazon

Comparison table

Swipe or scroll sideways to see every model.
Top 10 catalytic converters
Spec
#1
SPEEDFusion YL12337G
Best overallCheck price on Amazon
#2
PHILTOP 2002-2006 Honda CR-V
Most O2 sensor portsCheck price on Amazon
#3
A-Premium APCCT212
Compact direct-fit bodyCheck price on Amazon
#4
PHILTOP Honda Accord 2003-2007
Heaviest rear converterCheck price on Amazon
#5
Dylannet 3" Catalytic Converter
Weld-on with heat shieldCheck price on Amazon
#6
A-Premium APCCT065
Most converters in packCheck price on Amazon
#7
A-Premium APCCT358
Left and right pairCheck price on Amazon
#8
Walker 15037
Pre-1995 universal optionCheck price on Amazon
#9
Reejim RJM-HFC-003-63
Lightest, shortest unitCheck price on Amazon
#10
ASOPARTS Universal - 2"
Smallest 2 in universalCheck price on Amazon
Best Scoreout of 10090746968666257513724
Converter typeDirect-fit (best in row)Direct-fit (best in row)Direct-fit (best in row)Direct-fit (best in row)Universal weld-onDirect-fit (best in row)Direct-fit (best in row)Universal weld-onUniversal weld-onUniversal weld-on
Emissions complianceEPA federal (best in row)EPA federal (best in row)EPA federal (best in row)EPA federal (best in row)EPA federal (best in row)EPA federal (best in row)EPA federal (best in row)EPA federal (best in row)Not specifiedNot specified
PositionFrontFrontFrontRearFrontFront and RearLeft and Right———
Body materialStainless steelStainless steelStainless steelStainless steelStainless steelStainless steelStainless steelStainless steelStainless steelStainless steel
Inlet diameterin————2.50 in——2.25 in2.50 in2.00 in
Outlet diameterin————2.50 in——2.25 in2.50 in2.00 in
Overall lengthin—29.1 in15.0 in21.2 in13.0 in———8.0 in11.0 in
O2 sensor ports—2 1 1 1 —1 ——1
Converters in pack1 1 —1 2 3 2 1 1 2
Weightlb—7.3 lb—8.8 lb7.9 lb——4.8 lb2.7 lb (best in row)—
Heat shield included—No—NoYes (best in row)——Yes (best in row)——
OE / reference numbers641531, 16702, 40885, 57223, 17203, 674489, 64153216167, 16462, 642288, 40402, 18160PPAA0016680, 641502, 674-891, 285102BEF1, 285002BSNA18160RAAA11, 18160RADL11, 16299, 642189, 40400—641531, 16702, 40885, 57223, 17203, 674-489644029, 41096, 17115, 644030, 41097, 17116———
Warrantyyears5 years (best in row)1 year1 year1 year—1 year1 year——1 year
Best in row— not published by the maker yet

How we chose

We reviewed 29 catalytic converters and kept only the 12 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.

Read the full method

In-depth reviews

These reviews are based on specifications and listing information only. Because none of the products lists a motorcycle fitment, each review says how well the product fits this keyword.

Best overall

SPEEDFusion YL12337GSPEEDFusion Front 2-PC Catalytic Converter

Leads our ranking, but it is built for cars

Emissions compliance
EPA federal (best of the reviewed tools)
Converter type
Direct-fit (best of the reviewed tools)
Body material
Stainless steel (best of the reviewed tools)
Warranty
5 years (best of the reviewed tools)

This converter leads our ranking on specs. It is a direct-fit front unit with EPA federal compliance and a stainless steel body. Direct-fit means no cutting or welding, which is what most riders want. The catch is the listing. It names Infiniti and Nissan models with the V6 3.5L engine and shows no motorcycle fitment at all.

The warranty is the strongest in the lineup. The maker lists a 5-year structural warranty, the longest among the models that list one. It also lists a 2.5-year/25,000-mile emissions performance warranty. Legal limits matter here too. The listing says the part is for federal emission vehicles only and is illegal to sell, install or use in California, Colorado, New York and Maine.

The listing also gives seven reference numbers, starting with 641531. It does not publish length, weight or O2 port count. For a motorcycle, that leaves too much unknown. Use it only if the part number matches your bike's maker data.

Pros

  • Longest warranty listed, 5 years
  • Direct-fit, no welding
  • EPA federal compliance listed

Cons

  • Listed for Infiniti and Nissan cars
  • Not legal in four states
Buy it if
you need an EPA part for a listed Nissan or Infiniti.
Skip it if
you need a part made for a motorcycle.

VerdictIt is the strongest set of specs on the page, but it is a car part, so confirm fit before you consider it for a bike.

Most O2 sensor ports

PHILTOP 2002-2006 Honda CR-VPHILTOP High Flow Catalytic Converter Honda CR-V

Ranks second with the most O2 ports

Emissions compliance
EPA federal (best of the reviewed tools)
Converter type
Direct-fit (best of the reviewed tools)
Body material
Stainless steel (best of the reviewed tools)
Warranty
1 year

This front converter ranks second on our sheet. It is direct-fit with EPA federal compliance. It has two O2 sensor ports, the most among the models that list them, and an overall length of 29.07 in, the longest among the models that list it. Those figures point to a large, car-sized part. It is sold as a single converter.

Fitment is narrow. The listing names the Honda CR-V 2.4L, 2002 to 2006, and nothing else. It comes with gaskets and hardware, so no modification is needed. The body is stainless steel and weighs 7.3 lb. No heat shield is included. The listing also says EPA converters cannot be sold or installed in California and Colorado.

The warranty is 1 year, the lowest figure on the sheet and shared with five other products. This is a car part. Nothing in the listing suggests it fits a motorcycle, so treat it as a reference for what a direct-fit EPA unit looks like. The listing says to check your emissions label and state rules before ordering.

Pros

  • Two O2 sensor ports
  • Gaskets and hardware included
  • Direct-fit, EPA federal

Cons

  • Only the Honda CR-V listed
  • 1-year warranty
Buy it if
you drive a 2.4L Honda CR-V and need EPA compliance.
Skip it if
you need a motorcycle part.

VerdictA good match for one specific car, and a poor lead for anyone shopping for a motorcycle.

Compact direct-fit body

A-Premium APCCT212A-Premium Front Catalytic Converter

A compact direct-fit option for small Hyundai and Kia cars

Emissions compliance
EPA federal (best of the reviewed tools)
Converter type
Direct-fit (best of the reviewed tools)
Body material
Stainless steel (best of the reviewed tools)
Warranty
1 year

A-Premium's APCCT212 ranks third. It is a direct-fit front converter with EPA federal compliance and a stainless steel body. Overall length is 14.96 in, and it has one O2 sensor port. That makes it much shorter than the 29.07 in CR-V unit above it. The listing names Hyundai and Kia cars with a 1.6L four-cylinder engine.

Compliance details are clear. The listing marks it as EPA compliant for federal emissions and restricts it in CA, NY, CO and ME. It gives five reference numbers, including 16680 and 641502. The maker does not publish weight, and it does not say whether a heat shield is included. A one-year unlimited-mileage guarantee covers the part.

This is a car part. Nothing in the data links it to a motorcycle, and a motorcycle exhaust is a different layout. A rider would be better served by a maker that lists motorcycle fitment and the right standard for the bike. Check your Emission Control Information Label and state rules before you order.

Pros

  • Short 14.96 in body
  • Direct-fit with EPA federal listing
  • Five reference numbers listed

Cons

  • Fits small Hyundai and Kia cars
  • Weight is not published
Buy it if
you own a listed 1.6L Hyundai or Kia.
Skip it if
you want a motorcycle-specific part.

VerdictSensible for the small cars it lists, but it gives a motorcycle owner nothing to go on.

Heaviest rear converter

PHILTOP Honda Accord 2003-2007PHILTOP Honda Accord 2003-2007 Rear Cat Converter

A rear-position converter and the heaviest listed

Emissions compliance
EPA federal (best of the reviewed tools)
Converter type
Direct-fit (best of the reviewed tools)
Body material
Stainless steel (best of the reviewed tools)
Warranty
1 year

Rank four goes to the PHILTOP unit for the 2003 to 2007 Honda Accord 2.4L. It sits in the rear position, which means it comes after the front converter in the exhaust path. At 8.8 lb it is the heaviest among the models that list weight. Overall length is 21.2 in, with one O2 sensor port.

Like the other PHILTOP unit, it is direct-fit with EPA federal compliance and a stainless steel body. The kit includes gaskets and hardware, and the listing says no part needs modifying. No heat shield is included. The data gives five OE reference numbers, among them 18160RAAA11 and 16299. The warranty is 1 year.

For a motorcycle buyer, a rear converter for a Honda Accord has no clear use. The listing shows no motorcycle fitment. It also carries the usual EPA limits: it cannot be sold or installed in California and Colorado, and in some cases in Maine and New York. Check your emissions label and state rules before you order.

Pros

  • Gaskets and hardware included
  • Direct-fit with EPA federal listing
  • Weight and length are published

Cons

  • Fits only the 2.4L Accord
  • 1-year warranty
Buy it if
you need a rear converter for a listed Accord.
Skip it if
you are shopping for a motorcycle.

VerdictA narrow, car-specific rear unit that does not answer the motorcycle question, so look elsewhere for a bike.

Weld-on with heat shield

Dylannet 3" Catalytic ConverterDylannet Universal High Flow Catalytic Converter

The only weld-on pick in the top five

Emissions compliance
EPA federal (best of the reviewed tools)
Converter type
Universal weld-on
Body material
Stainless steel (best of the reviewed tools)
Warranty
—

This is the one universal weld-on unit in the top five. Weld-on means someone cuts your pipe and welds the converter in, so it can suit custom exhausts where direct-fit parts cannot. It lists EPA federal compliance, a stainless steel body and a heat shield. The pack holds two converters.

Size is the key check. The data lists a 2.5 in inlet and a 2.5 in outlet, with a 13 in overall length. The model name says 3 in, so measure your pipe before you order. It has one O2 sensor port and weighs 7.87 lb. The maker does not publish a warranty or reference numbers.

The listing says it is not sold in California, Colorado, New York or Maine. It also lists no motorcycle use, so confirm the pipe size and emissions rules for your bike. A shop should check that the 13 in body fits your layout. Check your state's aftermarket converter rules before you buy.

Pros

  • Universal weld-on for custom pipes
  • Heat shield included
  • Two converters in the pack

Cons

  • No warranty term published
  • Not marked for motorcycle use
Buy it if
you need a universal 2.5 in weld-on and can have it installed.
Skip it if
you want a bolt-on part with a warranty.

VerdictIt is the most flexible format here for a custom bike exhaust, but check size and local rules first, since nothing confirms a motorcycle fit.

Best among the reviewed tools

Buying guide

Check legality first

Look at the emissions standard on each listing. EPA federal parts cannot be sold or installed in California, Colorado, and in some cases Maine and New York. Check your bike's emissions label and your state's rules. Some products here do not specify any standard at all.

Direct-fit or universal weld-on

Direct-fit units are made for a listed vehicle and need no welding. Universal weld-on units suit many pipes but must be cut in and welded. A bike with a custom or aftermarket pipe may need a universal part. Match the type to your exhaust.

Match pipe size and length

Measure your pipe before ordering. The universal units here list inlets and outlets of 2 in, 2.25 in or 2.5 in. Overall length runs from 8 in to 29.07 in among the models that list it. Space is tight on many bikes, so check the body fits.

Confirm motorcycle fitment

Every product on this page is listed for cars or as a universal part. None names a motorcycle. Ask the maker for written fitment before you buy, and check O2 sensor ports if your bike has a sensor. A shop can confirm placement and orientation.

FAQ

Are car catalytic converters legal on a motorcycle?

The listings here do not say. None names a motorcycle fitment. Legality depends on your bike's emissions label and your state's rules. Ask the maker and your state emissions agency before you buy or install any converter.

What does EPA federal mean on a converter?

It means the maker lists the part as EPA compliant for vehicles that meet federal emission standards. The listings say these parts cannot be sold or installed in California or Colorado, and in some cases Maine and New York. Those states may require CARB-compliant parts.

Should I pick direct-fit or universal weld-on?

Pick direct-fit if the maker lists your exact vehicle. It needs no welding. Pick a universal weld-on if your pipe is custom or no direct-fit part exists. Then match the inlet and outlet diameter to your pipe and plan for professional installation.

Do all converters list an emissions standard?

No. Two products here, the Reejim and ASOPARTS units, list the standard as not specified. The Reejim listing says it is not legal in California or other states that require CARB-compliant aftermarket converters. Check this before you order.

Related comparisons

Share this comparison

Your own selection is kept in the link, so friends see the same side-by-side.

Top pick · #1SPEEDFusion YL12337G
Check price on Amazon