Dimmer Switches · 10 compared side by side

Best Dimmer Switches in 2027

A good dimmer must work with your bulbs, fit your wiring and be simple to install. Check the maximum LED load, whether a neutral wire is required, and if you need single-pole or 3-way support. Low-end trim helps with flicker or buzz at low brightness. Smart models add app and voice control, but some need a neutral wire. We put 10 products on one spec sheet so you can compare these points side by side.

Quick answer

  • Best overall: ELEGRP DM19-WH (#1, Best Score 68; control type Slide, max led/cfl load 300 W)
  • Smart app and voice control: Kasa Smart HS220 (#2, Best Score 64; control type Smart (Wi-Fi/app), max led/cfl load 150 W)
  • Trim lever for LED tuning: Lutron DVCL-153P-WH-6 (#3, Best Score 60; control type Paddle)

Ranked from 10 dimmer switches that met our standard, compared on LED compatibility (min/max LED load), neutral wire requirement, and low-end trim.

Updated November 202620 reviewed · 10 met our standard14 specs comparedBy Comparabo editors

As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

Top picks

Best overall
#1
ELEGRP DM19-WH

ELEGRP DM19-WHELEGRP Digital Slide Dimmer (10 Pack)

Tied for the highest LED and incandescent loads, needs no neutral wire, and comes in a 10 pack.

Control type
Slide
Max LED/CFL load
300 W
Wiring support
Single-pole and 3-way
Check price on Amazon
Smart app and voice control
#2
Kasa Smart HS220

Kasa Smart HS220Kasa Smart Dimmer Switch HS220

Works with Amazon Alexa and Google Assistant, but needs a neutral wire and is single-pole only.

Control type
Smart (Wi-Fi/app)
Max LED/CFL load
150 W
Wiring support
Single-pole only
Check price on Amazon
Trim lever for LED tuning
#3
Lutron DVCL-153P-WH-6

Lutron DVCL-153P-WH-6Lutron Diva LED+ Paddle Dimmer 6-Pack

A low-end trim lever and no neutral requirement suit LED bulbs, though load ratings are not listed.

Control type
Paddle
Max LED/CFL load
—
Wiring support
Single-pole and 3-way
Check price on Amazon

Comparison table

Swipe or scroll sideways to see every model.
Top 10 dimmer switches
Spec
#1
ELEGRP DM19-WH
Best overallCheck price on Amazon
#2
Kasa Smart HS220
Smart app and voice controlCheck price on Amazon
#3
Lutron DVCL-153P-WH-6
Trim lever for LED tuningCheck price on Amazon
#4
BESTTEN USP-DS09N-3PK
High load in a 3-packCheck price on Amazon
#5
BESTTEN LUXDMWK600-12-3
Memory plus flicker wheelCheck price on Amazon
#6
Lutron PD-6WCL-WH
Hub-based smart dimmingCheck price on Amazon
#7
Leviton R02-66741-00W
Slide with fade-rate settingsCheck price on Amazon
#8
Leviton R02-TSL01-00W
Toggle-style LED dimmerCheck price on Amazon
#9
Leviton R02-DSL01-0LW
Adjustable locator lightCheck price on Amazon
#10
BESTTEN USP-DS09M-10PK
Super slim bodyCheck price on Amazon
Best Scoreout of 10068646058545349494746
Control typeSlideSmart (Wi-Fi/app) (best in row)PaddleSlideSlideSmart (Wi-Fi/app) (best in row)SlideToggleSlideSlide
Wiring supportSingle-pole and 3-way (best in row)Single-pole onlySingle-pole and 3-way (best in row)Single-pole and 3-way (best in row)Single-pole and 3-way (best in row)Single-pole and 3-way (best in row)Single-pole and 3-way (best in row)Single-pole and 3-way (best in row)Single-pole and 3-way (best in row)Single-pole and 3-way (best in row)
Neutral wire requiredNoYesNoNoNoNoNoNoNoNo
Max LED/CFL loadW300 W (best in row)150 W—300 W (best in row)150 W150 W150 W150 W150 W300 W (best in row)
Max incandescent/halogen loadW600 W (best in row)300 W—600 W (best in row)600 W (best in row)—150 W150 W150 W600 W (best in row)
Min LED loadW————3 W—————
Smart app and voice control—Yes (best in row)No—NoYes (best in row)————
Hub required—Yes———Yes————
Adjustable low-end trim——Yes—Yes—YesYesYes—
Remembers last level————Yes—————
Wallplate includedYesYes——Yes————Yes
Safety certificationUL (best in row)UL (best in row)None listedETL (best in row)UL (best in row)————ETL (best in row)
Pack sizepcs10 pcs (best in row)1 pcs6 pcs3 pcs10 pcs (best in row)1 pcs1 pcs1 pcs1 pcs10 pcs (best in row)
Warrantyyr2 years—————————
Best in row— not published by the maker yet

How we chose

We reviewed 20 dimmer switches and kept only the 10 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.

Read the full method

In-depth reviews

These reviews are based on specifications and listing information. We cover the five top-ranked dimmers on our spec sheet.

Best overall

ELEGRP DM19-WHELEGRP Digital Slide Dimmer (10 Pack)

ELEGRP leads our ranking with high loads and no neutral

Max LED/CFL load
300 W (best of the reviewed tools)
Min LED load
—
Pack size
10 pcs (best of the reviewed tools)
Warranty
2 years

The ELEGRP DM19-WH ranks first on our spec sheet. It handles up to 300W of LED and CFL bulbs and up to 600W of incandescent and halogen. Among all 12 products on this page, the 300W LED rating is tied for the highest. That headroom means a room with many dimmable bulbs is less likely to overload it.

Wiring is simple for most homes. It needs no neutral wire, which matters in older houses where the switch box often lacks one. It works in single-pole and 3-way setups. In a 3-way circuit, use only one dimmer. The listing says a swap can take as little as 15 minutes, and a wallplate is included.

The digital circuit fades lights on gradually, which the maker says reduces inrush current. A locator light helps you find the slide in the dark and can be turned off. It is UL listed and carries a 2 yr warranty. The 10 pack is tied for the largest pack size on this page.

Pros

  • Tied for highest LED load
  • No neutral wire needed
  • Works single-pole and 3-way

Cons

  • Slide control only
  • Only one dimmer per 3-way circuit
Buy it if
you need to dim several LEDs from one control.
Skip it if
you want app or voice control.

VerdictA well-matched pick for most dimmable LED rooms, especially older wiring without a neutral.

Smart app and voice control

Kasa Smart HS220Kasa Smart Dimmer Switch HS220

Kasa HS220 adds app and voice control but needs a neutral

Max LED/CFL load
150 W
Min LED load
—
Pack size
1 pcs
Warranty
—

The Kasa HS220 is a smart dimmer, so it works differently from the plain dimmers on this page. You control it from the Kasa app on Android or iOS, or by voice through Amazon Alexa or Google Assistant. It ranks second on our spec score, but it suits a smart home better than a basic dimming job.

Wiring is the main limit. The listing says it requires neutral wiring and 2.4 GHz Wi-Fi. It is single-pole only, so it will not replace a switch in a 3-way circuit. The maker suggests an electrician if you are unfamiliar with electrical wiring. Check your switch box before you order.

Load ratings are modest. It handles 150W of LED and CFL and 300W of incandescent and halogen. The 150W LED figure is tied for the lowest on this page. Gentle Off fades lights out with a double click. Scheduling, timers and Away Mode are included. It is UL listed and comes with a wallplate.

Pros

  • App and voice control
  • Alexa and Google Assistant support
  • Scheduling and Away Mode

Cons

  • Neutral wire required
  • No 3-way support
Buy it if
you want app and voice control.
Skip it if
your switch box has no neutral wire.

VerdictA capable smart dimmer for single-pole switches with a neutral, but not a plain dimmer replacement.

Trim lever for LED tuning

Lutron DVCL-153P-WH-6Lutron Diva LED+ Paddle Dimmer 6-Pack

Lutron Diva LED+ targets flicker and buzz with a trim lever

Max LED/CFL load
—
Min LED load
—
Pack size
6 pcs
Warranty
—

The Diva LED+ is a paddle dimmer built for LED bulbs. The listing says it reduces flicker, buzz and delay, which are the usual complaints with LED dimming. It ranks third on our spec score. No load ratings are listed here, so check bulb compatibility before buying. Pick bulbs marked dimmable.

A trim lever lets you set the low-end level, which helps if bulbs flicker at the bottom of the range. It works in single-pole and 3-way circuits and needs no neutral wire. The listing says it suits recessed lights, chandeliers, pendants and ceiling fixtures. In a 3-way setup, you pair it with a compatible switch.

It comes as a 6-pack, which covers several rooms. It has no smart features, so control is by paddle only. No safety certification is listed for it, while several rivals list UL or ETL. That gap is worth weighing before you buy. The Diva paddle style matches standard paddle switches, per the listing.

Pros

  • Low-end trim lever
  • No neutral wire needed
  • Single-pole and 3-way

Cons

  • No safety certification listed
  • No load ratings listed
Buy it if
flicker or buzz is your main worry.
Skip it if
you want UL or ETL listing shown.

VerdictA sound LED-focused dimmer, though missing load and certification details hold it back.

High load in a 3-pack

BESTTEN USP-DS09N-3PKBESTTEN Slide Dimmer Light Switch 3PK

BESTTEN 3-pack matches the highest loads on the page

Max LED/CFL load
300 W (best of the reviewed tools)
Min LED load
—
Pack size
3 pcs
Warranty
—

The USP-DS09N is a slide dimmer rated for 300W of LED and CFL and 600W of incandescent and halogen. Both figures tie for the highest listed among the products on this page. For a kitchen or living room with several dimmable bulbs, that leaves more room before you hit the limit. Check the load of all bulbs on the circuit before choosing. It ranks fourth.

It needs no neutral wire and supports single-pole and standard 3-way wiring. The listing calls the body shallow, so it should fit crowded electrical boxes. One rule matters. Only one dimmer is allowed in a circuit, including a 3-way or 4-way circuit, or flicker and failure can result.

It comes as a 3-pack, enough for a few rooms. Its safety listing is ETL. The listing gives its rating as 15A/120V/60Hz. The data shows no wallplate, memory function or low-end trim for it, so you cannot count on those extras.

Pros

  • Tied for highest LED load
  • Tied for highest incandescent load
  • No neutral wire needed

Cons

  • Only one dimmer per circuit
  • No low-end trim listed
Buy it if
you want a smaller pack with high loads.
Skip it if
you need memory or low-end trim.

VerdictA high-capacity slide dimmer in a handy pack, with few extras beyond the basics.

Memory plus flicker wheel

BESTTEN LUXDMWK600-12-3BESTTEN Slide Dimmer Switch 10-Pack

BESTTEN 10-pack adds memory and a flicker adjustment wheel

Max LED/CFL load
150 W
Min LED load
3 W
Pack size
10 pcs (best of the reviewed tools)
Warranty
—

This slide dimmer ranks fifth, but it offers two controls that matter with LEDs. The rocker remembers the last dimmed level, and a side wheel adjusts the dimming range to cut flicker. The listing says to rotate the wheel if flicker appears. It lists a minimum LED load of 3W.

Load limits differ by bulb type. It handles 600W of incandescent and halogen, tied for the highest on this page. Its LED and CFL limit is 150W, so a large bank of LED bulbs may reach the cap sooner than on 300W models. It needs no neutral wire and works in single-pole and 3-way circuits.

It is UL listed and ships as a 10-pack with decor wall plates. That pack size is tied for the largest on this page. Only one dimmer is allowed in a circuit, and the listing says it cannot control fans. The housing is polycarbonate, which the maker links to heat and fade resistance.

Pros

  • Remembers last dimmed level
  • Side wheel adjusts low end
  • Wallplates included

Cons

  • LED load capped at 150W
  • Cannot control fans
Buy it if
you have flickering LEDs to tune.
Skip it if
you run many LED bulbs on one dimmer.

VerdictA feature-rich slide dimmer for tuning LEDs, held back by its lower LED load limit.

Best among the reviewed tools

Buying guide

Match the load rating

Add up the wattage of every bulb on the circuit and stay under the dimmer's limit. In this lineup, LED and CFL limits are 150W or 300W. Incandescent and halogen limits reach 600W. Using fewer, lower-wattage LEDs gives more headroom on a 150W model.

Check for a neutral wire

Many older switch boxes have no neutral wire. Most dimmers here need none. The Kasa HS220 does require one, per its listing. Open the box with the power off, or ask an electrician, to see what wires you have before choosing.

Single-pole or 3-way wiring

Single-pole means one switch controls a light. A 3-way circuit has two switches for one light. Most dimmers here support both, but the Kasa HS220 is single-pole only. In a 3-way circuit, install just one dimmer. The other switch stays a standard 3-way switch.

Look for low-end trim

Low-end trim sets the lowest brightness so LEDs do not flicker or drop out. The Lutron Diva LED+, the BESTTEN LUXDMWK600 and three Leviton models list it. Memory function, listed on the BESTTEN, returns lights to your last level.

FAQ

Do LED bulbs need a special dimmer?

Use a dimmer rated for LED and check that your bulbs are marked dimmable. Look at the max LED load and the minimum LED load where listed. The BESTTEN LUXDMWK600 lists a 3W minimum. Low-end trim can also reduce flicker.

Can I use a dimmer without a neutral wire?

Yes, if you pick one that needs none. The ELEGRP DM19-WH, Lutron Diva LED+, the BESTTEN slide models and the Leviton dimmers list no neutral requirement. The Kasa HS220 does require one. Check your wiring first.

Can I put two dimmers on one 3-way circuit?

No. Use one dimmer per 3-way or 4-way circuit. The BESTTEN listings warn that more than one can cause severe flickering or failure. The ELEGRP listing gives the same advice, and the other switches then turn the light on at the dimmer's chosen level.

Is a smart dimmer worth it over a basic one?

A smart dimmer adds app control, schedules and voice control. The Kasa HS220 supports Amazon Alexa and Google Assistant, and the Lutron Caseta needs a Lutron hub. The tradeoff is extra setup, and the Kasa needs a neutral wire. If you only need dimming, a basic model is simpler.

Related comparisons

Share this comparison

Your own selection is kept in the link, so friends see the same side-by-side.

Helpful guides

Top pick · #1ELEGRP DM19-WH
Check price on Amazon