
smseace D-109-Silver-3/16smseace Brake Line Flaring Repair Kit
Widest tube range, with cutter, bender and fittings all included.
- Drive type
- —
- Flare angle
- —
- Max tube size
- 0.875 in
A good brake line kit needs more than a flaring tool. Check the flare angle first, because brake systems use different flare styles. Then check tube size range, compatible tubing, and whether a cutter, bender and fittings are included. Die count and drive type matter for ease of use. We put 18 products on one spec sheet, so you can compare these points side by side. Where a maker does not publish a spec, we say so.
Quick answer
Ranked from 18 brake line flaring tools that met our standard, compared on flare angle (45° and 37° support), included cutter and bender, tube size range.
As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

Widest tube range, with cutter, bender and fittings all included.

Packs 3/16 and 1/4 in brake line, with a listed weight of 6.55 lb.

Lists 60 3/8-24 nuts, plus 7/16-24, 1/2-20 and 9/16-18 nuts.
| Spec | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Best Scoreout of 100 | 77 | 74 | 71 | 55 | 54 | 54 | 49 | 46 | 46 | 46 |
| Drive type | — | — | — | Manual (vise mount) | Manual (vise mount) | Pneumatic or power (best in row) | Hydraulic (best in row) | Hydraulic (best in row) | Manual (bar and yoke) | Manual (vise mount) |
| Flare types | Single and double flare | Single and double flare | Single and double flaring | Single, double, bubble flares | Single, double, bubble flares | — | Single, double, inverted, push connect, ISO | 45° single & double, ISO bubble, push connect, GM | Double, single | Single, bubble, double |
| Flare angle | — | — | — | 45° and 37° (best in row) | 45° and 37° (best in row) | — | 45° only | 45° only | 45° only | 45° and 37° (best in row) |
| Min tube sizein | 0.125 in (best in row) | 0.125 in (best in row) | 0.188 in | 0.188 in | 0.188 in | 0.250 in | 0.188 in | 0.188 in | 0.188 in | 0.188 in |
| Max tube sizein | 0.875 in (best in row) | 0.625 in | 0.500 in | 0.375 in | 0.375 in | 0.750 in | 0.500 in | 0.500 in | 0.500 in | 0.375 in |
| Die sizes includedpcs | — | — | — | 9 pcs (best in row) | 8 pcs | 5 pcs | — | — | 5 pcs | 4 pcs |
| Compatible tubing | Copper, aluminum, stainless steel | Brass, copper, aluminum, magnesium, mild steel | Brass, copper, aluminum, magnesium, mild steel | 304 stainless steel, steel, soft metal tubing | Stainless steel, steel, soft metal like copper | Soft (HVACR) copper | Copper; fuel, brake, transmission lines | — | Copper, aluminum, soft steel, brass | Copper, aluminum, other metal pipes (not stainless) |
| Tube cutter included | Yes (best in row) | Yes (best in row) | Yes (best in row) | No | No | — | Yes (best in row) | Yes (best in row) | Yes (best in row) | — |
| Tube bender included | Yes (best in row) | Yes (best in row) | Yes (best in row) | No | No | — | — | — | No | — |
| Tubing and fittings included | Yes (best in row) | Yes (best in row) | Yes (best in row) | No | No | No | — | — | No | — |
| Metric tube sizes supported | Yes | Yes | — | Yes | Yes | — | Yes | — | — | — |
| Weightlb | — | 6.5 lb | — | — | — | 2.9 lb | — | 12.0 lb | — | 10.4 lb |
| Warrantyyears | — | — | — | — | — | 2 years | — | — | — | — |
We reviewed 28 brake line flaring tools and kept only the 18 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.
These reviews are based on specifications and listing information only. They cover the five top-ranked products, from all-in-one kits to flaring-only tools.
Wide tube range with cutter, bender and fittings
This kit covers the whole job of replacing a brake line. It includes a flaring tool for single and double flares, a tube cutter, a tube bender and fittings. The listing describes two sets of 3/16 in brake lines with 102pcs fittings. You can cut, flare, bend and connect without adding parts.
Tube range is the standout. It handles 0.125 to 0.875 in, and the max is the highest of all 18 products on the page. The cutter covers 1/8 in to 7/8 in (3-22mm) outer diameter. It lists copper, aluminum and stainless steel tubing, and it supports metric sizes. That gives you room for odd lines beyond standard 3/16 in.
The maker does not publish a flare angle or a weight. Confirm your car needs the flare style this tool makes before you cut. Brake systems differ, and the wrong flare can leak. Listing details say the single flare tool covers 3/16, 1/4, 5/16, 3/8 and 1/2 in tubes. It leads our ranking.
VerdictA strong all-in-one choice for DIY brake line replacement, as long as you verify the flare style fits your system.
Kit adds both 3/16 and 1/4 in brake line
Eoppen includes two 25 ft lengths of brake line, one 3/16 and one 1/4. That gives you two line sizes to work with from one box. The flaring set has a flaring bar, a flaring cone, a tube cutter, five adapters and a blow-molded case. A brake line bender is also in the package.
Tube range is 0.125 to 0.625 in, with metric sizes supported. The listing names brass, copper, aluminum, magnesium and mild steel as compatible metals. Stainless steel is not listed, so check your line material. Weight is 6.55 lb, which is useful to know if you carry the kit to a job.
The maker does not publish a flare angle. The listing says it suits most hydraulic brake systems, fuel systems and driveline systems. Confirm the flare type your vehicle needs. It ranks second in our ranking.
VerdictA well-stocked kit for mixed line sizes, held back only by the missing flare angle and a narrower tube range than the first-ranked kit.
Fittings-heavy kit built around 3/16 in line
Ailbiuko builds this kit around one line size. It ships with two 3/16 in brake lines and a large fitting assortment: 60 nuts in 3/8-24, 16 in 7/16-24, 8 in 1/2-20 and 8 in 9/16-18. It also lists 8 unions in 3/8-24. Those four thread sizes cover regular 3/16 in tube fittings, per the listing.
The tool set has a flaring bar, a flaring cone, five adapters, a tube cutter and a tube bender. It handles single and double flares in brass, copper, aluminum, magnesium and mild steel. Tube range is 0.1875 to 0.5 in. The listing names 3/16, 1/4, 5/16, 3/8 and 1/2 in tubing.
Gaps matter here. The data shows no flare angle and no weight, and metric sizes are not listed. Stainless steel is not listed as compatible tubing either. It ranks third, with a narrower tube range than the two kits above it.
VerdictA fitting-rich kit for 3/16 in repairs that gives up tube range and some published details, so check them against your vehicle first.
Dual-angle flaring tool without cutter or bender
This is a vise-mounted manual flaring tool, not a full repair kit. It makes single, double and bubble flares at 45° and 37°. That dual angle helps if your system needs one or the other. The listing says it must be used with a vise on a bench. For a buyer who wants a complete kit, it fits only part of the job.
Die count is its strength. It lists 9 die sets, the highest among the 11 products that list the spec. The listing names five 45° split die blocks and four 37° blocks, covering 3/16, 1/4, 5/16 and 3/8 in lines, with a 6mm block at 45°. Tube range is 0.1875 to 0.375 in.
It does not include a cutter, a bender or tubing and fittings, so you must buy those separately. Metric sizes are supported. Tubing listed includes 304 stainless steel, steel and soft metal. It ranks fourth on our list.
VerdictA capable flaring tool for bench work, but you must add cutting, bending and tubing yourself.
Similar flaring tool with eight die sets
SEEKSELF sells a vise-mounted manual tool that makes single, double and bubble flares. It lists 45° and 37° angles, so it can suit systems that use either. It is a flaring tool only. There is no cutter, no bender and no tubing or fittings in the package.
The listing includes four 45° split die blocks and four 37° blocks, for 8 die sets. They fit 3/16, 1/4, 5/16 and 3/8 in lines (4.75mm to 9.5mm). Tube range is 0.1875 to 0.375 in. Compatible tubing is stainless steel, steel and soft metal like copper. Metric sizes are supported.
Safety notes in the listing are useful for a first-time user. Clamp the base in a reliable vise, and do not use the tool under a car. Wear goggles and gloves. It has one fewer die set than the DPTOOL kit above it, and it ranks fifth.
VerdictA dual-angle flaring tool for the bench that covers only the flaring step, so plan to source tubing, a cutter and a bender separately.
Best among the reviewed tools
Brake systems need a specific flare style and angle, and a mismatch can leak. Dual-angle tools like DPTOOL and SEEKSELF list 45° and 37°. Several kits here do not publish an angle. Confirm what your vehicle needs before you cut any line.
A DIY replacement needs a flaring tool, a cutter, a bender and tubing with fittings. The top three kits list all of these. The DPTOOL and SEEKSELF tools list none of the cutter, bender or fittings. Count what you must buy separately.
Tube range tells you which lines the dies and cutter can handle. The smseace kit spans 0.125 to 0.875 in. Material matters too. Some listings say stainless steel is not suitable, so check your line before buying.
Manual vise tools are simple but need a bench. Hydraulic tools reduce hand strain. Power tools like the NAVAC target soft HVAC copper, not brake lines. Match the drive type to where you will work and to the metal you will flare.
It depends on your vehicle's system, so check its service information. The makers of the top three kits do not publish a flare angle. DPTOOL and SEEKSELF list 45° and 37°. Several others list 45° only. Confirm the angle before you buy.
The smseace, Eoppen and Ailbiuko kits each list a cutter, a bender and tubing with fittings. TUBPRO lists a cutter but no bender. DPTOOL and SEEKSELF list neither a cutter nor a bender, so you add both.
Some can. The smseace kit lists stainless steel tubing, and DPTOOL lists 304 stainless steel. SEEKSELF lists stainless steel too. Both Orion Motor Tech listings say they are not suitable for stainless steel. Check the tubing list before you buy.
Hydraulic tools use a ram, which the Mastercool listing says removes manual strain. Manual tools such as the TUBPRO bar-and-yoke or the vise-mount DPTOOL are the manual options. Vise-mount tools must be used on a bench, not under the car. Pick by where you will work.
Your own selection is kept in the link, so friends see the same side-by-side.