
BENEHIKE BENEHIKE SUP Electric Pump
It lists the highest pressure at 60 PSI and the highest airflow at 450 L/min, with battery and 12V power.
- Max pressure
- 60 PSI
- Power source
- Battery + 12V car
- Weight
- 2.7 lb
For inflating boats and other inflatables, a few specs matter most. Max pressure tells you whether the pump can reach your boat's target PSI. Airflow shows how fast it fills the volume. Power source decides where you can use it: battery, 12V car outlet or AC. Auto shut-off stops the pump at your preset pressure. We put 6 products on one spec sheet, ranked on those specs. Several are built for paddle boards, so we flag where a pump fits boats and where it does not.
Quick answer
Ranked from 6 electric inflatable pumps that met our standard, compared on airflow rate (L/min), max pressure (PSI), power source (12V car / AC / rechargeable).
As an Amazon Associate I earn from qualifying purchases. Links to retailers on this site are affiliate links; we may earn a commission at no extra cost to you.

It lists the highest pressure at 60 PSI and the highest airflow at 450 L/min, with battery and 12V power.

It lists 50 PSI and 420 L/min, with battery plus 12V car power and auto shut-off.

It includes 7 nozzles for different valves, but it runs only from a 12V car outlet.
| Spec | ||||||
|---|---|---|---|---|---|---|
| Best Scoreout of 100 | 80 | 70 | 57 | 51 | 49 | 43 |
| Max pressurePSI | 60 PSI (best in row) | 50 PSI | 20 PSI | 20 PSI | 1 PSI | 16 PSI |
| Max airflowL/min | 450 L/min (best in row) | 420 L/min | — | 400 L/min | 400 L/min | — |
| Power source | Battery + 12V car (best in row) | Battery + 12V car (best in row) | 12V car only | Rechargeable battery (best in row) | AC + 12V DC | Battery + 12V car (best in row) |
| Battery capacityWh | — | — | — | — | — | 72 Wh |
| Motor powerW | — | — | — | — | — | — |
| Weightlb | 2.7 lb | 2.9 lb | 3.1 lb | 2.8 lb | 0.8 lb (best in row) | 6.7 lb |
| Auto shut-off at preset pressure | Yes | Yes | Yes | Yes | — | — |
| Deflation function | Yes | Yes | Yes | Yes | Yes | Yes |
| Digital pressure display | Yes | Yes | Yes | Yes | — | Yes |
| Active cooling fan | Yes | Yes | Yes | — | — | — |
| Nozzles included | — | — | 7 (best in row) | 7 (best in row) | 3 | — |
| Built-in light | Yes | Yes | Yes | Yes | — | Yes |
| Warrantyyears | — | — | — | 2 years | 2 years | — |
We reviewed 9 electric inflatable pumps and kept only the 6 that pass every check below. Those are ranked by a Best Score built from spec fit for this job, sales rank.
These reviews are based on specifications and listing information only. Each one explains what the numbers mean for inflating boats and other inflatables.
Highest pressure and airflow on the page
This pump leads our ranking, and the specs show why. It lists 60 PSI max pressure, the highest of the six products. Airflow is 450 L/min, also the highest among the four models that list it. High airflow fills the big volume of a boat or board quickly. High pressure means it can reach firm targets. Both numbers come straight from the spec sheet.
Power is flexible. It runs on its built-in battery or a 12V car outlet, so a dead battery does not end the job. The listing describes a dual-stage design: 450 L/min for bulk filling, then 100 L/min to top off pressure. Auto shut-off stops the pump at your preset pressure, which protects against over-inflation.
At 2.7 lb it is easy to carry. It also has a digital pressure display, an active cooling fan for long sessions, a built-in light and a deflation function. The light helps when you inflate at dawn or dusk by the water. The warranty length and nozzle count are not listed.
VerdictA fast, flexible pump that leads our ranking for inflating boats and boards.
A close second with the same feature set
The P9 ranks second. Its max pressure is 50 PSI and its airflow is 420 L/min. Both sit just below the top model. The listing describes a three-stage design that ramps from 350 to 420 L/min, then drops to 70 L/min to finish at high pressure. That staging helps with the slow final push to pressure.
Power comes from a built-in battery or a 12V car outlet. The listing says one charge can inflate and deflate up to 4 paddleboards at 12 PSI. The listing also cites a 2-minute deflation time. Auto shut-off stops the pump at your set pressure. A digital display shows current and target pressure, so you can watch the fill instead of guessing.
It weighs 2.9 lb, a little more than the top model. An active cooling fan, a deflation function and a built-in light are all listed. The maker does not publish a warranty length or nozzle count here. This pump is built around paddleboards, so check your boat's valve.
VerdictA strong second choice that trades a little pressure and airflow for the same features.
12V-only pump with a 20 PSI ceiling and seven nozzles
This is the third-ranked model, and it needs a car. The listing says it runs on a 12V DC car outlet only and is not a battery version. If you launch from a parking lot, that works. At a remote shore, it does not. The models ranked first, second and fourth all offer battery power.
Max pressure is 20 PSI. That covers most inflatable paddle boards, kayaks and boats, but it is far below the 50 and 60 PSI models. The maker does not publish an airflow rate, so speed is unclear from the specs. Auto shut-off, a digital display, a cooling fan and deflation are all listed.
It includes 7 nozzles, tied with AIRBANK for the most listed. Nozzles matter because valve types differ. The extra nozzles help if you also inflate other gear. The listing names an H3 fitting plus adapters for mattresses, pools and tents. It weighs 3.13 lb and has a built-in light.
VerdictA fine car-powered pump for paddleboards, but the lack of a battery limits where it works.
Rechargeable pump with 7 nozzles and a 2-year warranty
The Puffer Pro ranks fourth. It runs on a rechargeable battery only, with no 12V car option listed. Max pressure is 20 PSI and airflow is 400 L/min. The listing describes two stages: 400 L/min for fast filling, then 75 L/min to reach pressure. It cites 7.5 minutes to 12 PSI on a 10.6 ft board. Power must come from the battery, so charge it before you leave.
Accuracy is a selling point. The listing says a differential barometer keeps readings within ±0.2 PSI. Auto shut-off stops the pump at your target, and a digital display shows setting and live pressure. For boats and boards, a precise reading helps you hit the maker's recommended pressure without overshooting.
It weighs 2.78 lb and comes with 7 nozzles, including C7 and D7 valve types per the listing. It is one of two models here with a listed 2-year warranty, along with Newpol. The maker does not publish battery capacity or list a cooling fan.
VerdictA tidy cordless option for paddleboards that gives up the car-power backup.
Low-pressure pump that suits beds and pool toys
This ranks fifth, and it does not really fit this keyword. Its max pressure is 0.58 PSI, the lowest of the six products. The listing warns against high-pressure items. Paddle boards and many inflatable boats need far more than that, so it will not finish them.
It does have real strengths for soft goods. Airflow is 400 L/min, which moves a lot of air into beds and pools. Power comes from AC or 12V DC, with both adapters included per the listing. It also deflates and ships with 3 nozzles in S, M and L sizes. Auto shut-off and a display are not listed.
At 0.77 lb, it is the lightest of the six products. It measures 3.1 × 3.1 × 3.7 in and carries a 2-year warranty. Use it for air beds, pool toys and swim rings. For a boat or paddle board that needs firm pressure, pick one of the higher-pressure models above instead.
VerdictHandy for soft inflatables, but too weak for the job in this keyword.
Best among the reviewed tools
Check your boat's recommended PSI first. Inflatable boats and paddle boards often need firm pressure, while beds and pool toys need very little. A pump with a 20 PSI ceiling covers many boards. The 0.58 PSI model on this page suits soft goods only.
A 12V car outlet works at a launch ramp but not on a remote shore. A built-in battery frees you from the car. Battery plus 12V gives both. AC suits home use. Choose based on where you will actually inflate.
Auto shut-off stops the pump at a preset pressure. That protects seams and valves from over-inflation. Pair it with a digital display so you can confirm the target before you start. Four of the six products here list auto shut-off.
Valve types vary, so nozzles matter. Two models here list 7 nozzles, and one lists 3. A cooling fan helps when you inflate several items back to back. The data lists a fan for the top three models only.
It depends on the boat, so check the maker's recommended pressure. Several pumps here reach 12 PSI per their listings, and the top two list 60 and 50 PSI maximums. A pump that only reaches 0.58 PSI will not fill a firm boat.
Not always. A car-powered pump works if you stay near your vehicle. Battery plus 12V models give you both options. The kosmegal pump is car only. The AIRBANK lists a rechargeable battery only, so charge it before you leave.
It stops the pump at the pressure you set, so it helps a lot. You still need to set the right target for your boat or board. Four of the six pumps here list this feature. The Newpol and AGPTEK do not list it.
They can be, if the pressure range and valve fit. Most pumps here are sold for paddle boards. Check your boat's recommended PSI, then confirm the nozzles. The kosmegal and AIRBANK pumps each list 7 nozzles, which gives you more valve options.
Your own selection is kept in the link, so friends see the same side-by-side.